Retro-Quik: Spyder Lights Retro-Quik: Spyder Lights Morimoto Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for many of aftermarket projector style headlights, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new! Spyder Lights: To ensure this kit will work on your housings; be sure to match up the template to the existing projector to ensure they're a match. The template can be seen in the photos. Mini H1 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The Super version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models. Morimoto XB Ballasts: Designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better! Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night. Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls. Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDEDSTANDARD EQUIPMENT:Projectors: Mini H1 Bi-xenon Brackets: Precision Fit Spyder Hardware: Automotive Grade Stainless Shipping: Ships free within the US* Warranty: Five YearsOPTIONAL EQUIPMENT:HID Ballasts: Morimoto XB35 AMP HID Bulbs: Morimoto XB H1 Wire Harness: Morimoto HD Relay Headlight Sealant: RetroRubber Glue

Retro-Quik: Spyder Lights

Code: RQSPYDER
$95.94
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $99

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for many of aftermarket projector style headlights, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!

Spyder Lights: To ensure this kit will work on your housings; be sure to match up the template to the existing projector to ensure they're a match. The template can be seen in the photos.

Mini H1 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The Super version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models.
Morimoto XB Ballasts: Designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.
Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds.
Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED

STANDARD EQUIPMENT:


Projectors: Mini H1 Bi-xenon
Brackets: Precision Fit Spyder
Hardware: Automotive Grade Stainless
Shipping: Ships free within the US*
Warranty: Five Years

OPTIONAL EQUIPMENT:

HID Ballasts: Morimoto XB35 AMP
HID Bulbs: Morimoto XB H1
Wire Harness: Morimoto HD Relay
Headlight Sealant: RetroRubber Glue

Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for many of aftermarket projector style headlights, the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!

Spyder Lights: To ensure this kit will work on your housings; be sure to match up the template to the existing projector to ensure they're a match. The template can be seen in the photos.

Mini H1 Projectors: Feature clear lenses to give them a wide, intense beam pattern with a sharp and colorful cutoff line. The Super version is enhanced with an all new optically advanced reflector bowl; improving low and high beam performance beyond all competing models.
Morimoto XB Ballasts: Designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better! Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night. Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls. Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!
WHAT'S INCLUDED

STANDARD EQUIPMENT:


Projectors: Mini H1 Bi-xenon
Brackets: Precision Fit Spyder Hardware: Automotive Grade Stainless Shipping: Ships free within the US* Warranty: Five Years

OPTIONAL EQUIPMENT:

HID Ballasts: Morimoto XB35 AMP
HID Bulbs: Morimoto XB H1 Wire Harness: Morimoto HD Relay Headlight Sealant: RetroRubber Glue

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE