Morimoto MLED 2.0 Bi-LED Projectors (LHD) Morimoto MLED 2.0 Bi-LED Projectors (LHD) Morimoto It's 2.0 Clock At our shop we love good old HID-powered projectors more than Kanye loves Kanye...BUT....Truth be told, The new M LED 2.0 is the best Bi-LED projector in the retrofitting world. At the same time, it's better than any Bi-xenon. Put simply it's hard not to like the new M LED 2.0. The performance unparalleled. The simplicity is sublime. The ease of installation is excellent. The instant on is awesome. The original M LED was great when it came out, but by today's standards it's no longer on the leaderboard. Now it's two-point-o time! Output Advantage: We'll just start with the hotspot. It's brighter than a D2S 5.0 with a CBI and 50w ballast, and 10% brighter than it's closest LED based competitor. The Kuria optic clear lens and koito-esque beam shaper produce a beam pattern that's way wider than a D2S 5.0 too. Their ECE-sloped beam pattern is super sharp and colorful. You can expect up to 83,000 peak CD--that is a lot of light. Distribution: Width and intensity are common characteristics that are easy to engineer and explain, but it's important not to downplay the importance of distribution! 80% of the optical engineering hours went into optimizing the way that every last lumen ended up on the road in the name of maximizing visibility both up ahead and off to the sides of the road. Each facet of the M LED 2.0's dual reflector bowl was carefully considered (and re-considered, and re-considered again) to ensure that the results were nothing short of perfection (both by the numbers, and subjectively). Yoshi Ishida, Morimoto's chief engineer, Yoshi Ishida, you nailed it. Easy Install: The threaded mounting shaft has been extended to 27.2mm in length and can be removed from the projector to free up more than an inch of depth for those who don't need/want it. It comes with a CNC machined lock ring and an optional tool for easy-tightening. H4 alignment-adapter comes standard, but it's easy to setup in any other fog light too. The active-cooling fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease. Simplicity: Forget about separate bulbs. Forget about big ballasts, or where to mount them. Forget about complex relay harnesses, and where to run them. Here, you've got the projector and a small external LED driver to regulate power and control its function. If you're a clutter-phobe, or simply tight on space working on something like a motorcycle: the M LED 2.0 is the way to go. Details: From the weather-tight grommet on the wiring to the blue-anodized lock ring, nothing was left behind. The lens holder looks great, the grille on the reflector bowl is unnecessarily beautiful. The geometry on the vanes on the heat sink were aligned to maximize air-flow and minimize temperatures. The abundance of precise, die-cast and CNC machined parts (rather than stamped) in the entire system makes for a slop-free setup and conveys quality over cost savings. It may be built for retrofitters, but the fit and finish is on-par with any OEM projector. Worth it? If you want the latest and greatest, Then yes. It is. Go for a comparable Bi-xenon setup and you'll need to buy big money bulbs, ballasts, and a relay harness for about the same price. Go for something like the UPS Power Plus Bi-LED / Hybrid laser projectors and you'll spend much more and can forget about an easy install. Morimoto's M LED 2.0 projectors may seem expensive on the surface, but you pay for what you get, and all things considered, they've got the most bang for the buck in the business right now. WHAT'S INCLUDEDPROJECTORS: 2x Morimoto M LED 2.0 Bi-LED LHDLED DRIVERS: 2x M LED 2.0HARDWARE: 2x Threaded shafts w/ lock ringsWARRANTY: 5 Years COMPATIBILITYAPPLICATIONS: Universal (cars/trucks/motorcycles)DIRECT FITMENT: H4 Fog Lights (little/no mods required)MODS REQUIRED: H1,H7,H11,H13,9005,9006,9007 housingsBOLT PATTERN: Morimoto Mini D2S 4.0 StandardINPUT VOLTAGE: 9-16V DCUNITED STATES: LHD (Left Hand Drive)SHROUDS: All Styles Except "Mini" or "Square"CENTRIC RINGS: Not RequiredTECH SPECSHEIGHT: 82mmWIDTH: 95mmDEPTH: 150mm (w/ shaft)DEPTH: 124mm (w/o shaft)LENS DIAMETER: 3.0" roundSHAFT DIAMETER: 35mmHOUSING DEPTH: 124mm MinimumSTANDARD LENS: 100% clarity "Kuria Optic" glassBOLT PATTERN: :D2S 4.0/5.0 StandardINPUT VOLTAGE: 9-30VMAIN BEAM: 29.5W (consumed)MAIN BEAM OUTPUT: 70,000CDDRIVER OUTPIT: 2,250 mAKELVIN RATING: 6300KLED SPEC: HML-3 7545 w/ Ceramic Substrate & ESD ProtectionOPERATING TEMP: -40C to +60C

Morimoto MLED 2.0 Bi-LED Projectors (LHD)

Code: PR352
$395.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $99

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

It's 2.0 Clock At our shop we love good old HID-powered projectors more than Kanye loves Kanye...BUT....Truth be told, The new M LED 2.0 is the best Bi-LED projector in the retrofitting world. At the same time, it's better than any Bi-xenon. Put simply it's hard not to like the new M LED 2.0. The performance unparalleled. The simplicity is sublime. The ease of installation is excellent. The instant on is awesome. The original M LED was great when it came out, but by today's standards it's no longer on the leaderboard. Now it's two-point-o time!

Output Advantage: We'll just start with the hotspot. It's brighter than a D2S 5.0 with a CBI and 50w ballast, and 10% brighter than it's closest LED based competitor. The Kuria optic clear lens and koito-esque beam shaper produce a beam pattern that's way wider than a D2S 5.0 too. Their ECE-sloped beam pattern is super sharp and colorful. You can expect up to 83,000 peak CD--that is a lot of light.

Distribution: Width and intensity are common characteristics that are easy to engineer and explain, but it's important not to downplay the importance of distribution! 80% of the optical engineering hours went into optimizing the way that every last lumen ended up on the road in the name of maximizing visibility both up ahead and off to the sides of the road. Each facet of the M LED 2.0's dual reflector bowl was carefully considered (and re-considered, and re-considered again) to ensure that the results were nothing short of perfection (both by the numbers, and subjectively). Yoshi Ishida, Morimoto's chief engineer, Yoshi Ishida, you nailed it.

Easy Install: The threaded mounting shaft has been extended to 27.2mm in length and can be removed from the projector to free up more than an inch of depth for those who don't need/want it. It comes with a CNC machined lock ring and an optional tool for easy-tightening. H4 alignment-adapter comes standard, but it's easy to setup in any other fog light too. The active-cooling fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease.

Simplicity: Forget about separate bulbs. Forget about big ballasts, or where to mount them. Forget about complex relay harnesses, and where to run them. Here, you've got the projector and a small external LED driver to regulate power and control its function. If you're a clutter-phobe, or simply tight on space working on something like a motorcycle: the M LED 2.0 is the way to go.

Details: From the weather-tight grommet on the wiring to the blue-anodized lock ring, nothing was left behind. The lens holder looks great, the grille on the reflector bowl is unnecessarily beautiful. The geometry on the vanes on the heat sink were aligned to maximize air-flow and minimize temperatures. The abundance of precise, die-cast and CNC machined parts (rather than stamped) in the entire system makes for a slop-free setup and conveys quality over cost savings. It may be built for retrofitters, but the fit and finish is on-par with any OEM projector.

Worth it? If you want the latest and greatest, Then yes. It is. Go for a comparable Bi-xenon setup and you'll need to buy big money bulbs, ballasts, and a relay harness for about the same price. Go for something like the UPS Power Plus Bi-LED / Hybrid laser projectors and you'll spend much more and can forget about an easy install. Morimoto's M LED 2.0 projectors may seem expensive on the surface, but you pay for what you get, and all things considered, they've got the most bang for the buck in the business right now.


WHAT'S INCLUDED
PROJECTORS: 2x Morimoto M LED 2.0 Bi-LED LHD
LED DRIVERS: 2x M LED 2.0
HARDWARE: 2x Threaded shafts w/ lock rings
WARRANTY: 5 Years


COMPATIBILITY
APPLICATIONS: Universal (cars/trucks/motorcycles)
DIRECT FITMENT: H4 Fog Lights (little/no mods required)
MODS REQUIRED: H1,H7,H11,H13,9005,9006,9007 housings
BOLT PATTERN: Morimoto Mini D2S 4.0 Standard
INPUT VOLTAGE: 9-16V DC
UNITED STATES: LHD (Left Hand Drive)
SHROUDS: All Styles Except "Mini" or "Square"
CENTRIC RINGS: Not Required

TECH SPECS
HEIGHT: 82mm
WIDTH: 95mm
DEPTH: 150mm (w/ shaft)
DEPTH: 124mm (w/o shaft)
LENS DIAMETER: 3.0" round
SHAFT DIAMETER: 35mm
HOUSING DEPTH: 124mm Minimum
STANDARD LENS: 100% clarity "Kuria Optic" glass
BOLT PATTERN: :D2S 4.0/5.0 Standard
INPUT VOLTAGE: 9-30V
MAIN BEAM: 29.5W (consumed)
MAIN BEAM OUTPUT: 70,000CD
DRIVER OUTPIT: 2,250 mA
KELVIN RATING: 6300K
LED SPEC: HML-3 7545 w/ Ceramic Substrate & ESD Protection
OPERATING TEMP: -40C to +60C




It's 2.0 Clock At our shop we love good old HID-powered projectors more than Kanye loves Kanye...BUT....Truth be told, The new M LED 2.0 is the best Bi-LED projector in the retrofitting world. At the same time, it's better than any Bi-xenon. Put simply it's hard not to like the new M LED 2.0. The performance unparalleled. The simplicity is sublime. The ease of installation is excellent. The instant on is awesome. The original M LED was great when it came out, but by today's standards it's no longer on the leaderboard. Now it's two-point-o time!

Output Advantage: We'll just start with the hotspot. It's brighter than a D2S 5.0 with a CBI and 50w ballast, and 10% brighter than it's closest LED based competitor. The Kuria optic clear lens and koito-esque beam shaper produce a beam pattern that's way wider than a D2S 5.0 too. Their ECE-sloped beam pattern is super sharp and colorful. You can expect up to 83,000 peak CD--that is a lot of light.

Distribution: Width and intensity are common characteristics that are easy to engineer and explain, but it's important not to downplay the importance of distribution! 80% of the optical engineering hours went into optimizing the way that every last lumen ended up on the road in the name of maximizing visibility both up ahead and off to the sides of the road. Each facet of the M LED 2.0's dual reflector bowl was carefully considered (and re-considered, and re-considered again) to ensure that the results were nothing short of perfection (both by the numbers, and subjectively). Yoshi Ishida, Morimoto's chief engineer, Yoshi Ishida, you nailed it.

Easy Install: The threaded mounting shaft has been extended to 27.2mm in length and can be removed from the projector to free up more than an inch of depth for those who don't need/want it. It comes with a CNC machined lock ring and an optional tool for easy-tightening. H4 alignment-adapter comes standard, but it's easy to setup in any other fog light too. The active-cooling fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease.

Simplicity: Forget about separate bulbs. Forget about big ballasts, or where to mount them. Forget about complex relay harnesses, and where to run them. Here, you've got the projector and a small external LED driver to regulate power and control its function. If you're a clutter-phobe, or simply tight on space working on something like a motorcycle: the M LED 2.0 is the way to go.

Details: From the weather-tight grommet on the wiring to the blue-anodized lock ring, nothing was left behind. The lens holder looks great, the grille on the reflector bowl is unnecessarily beautiful. The geometry on the vanes on the heat sink were aligned to maximize air-flow and minimize temperatures. The abundance of precise, die-cast and CNC machined parts (rather than stamped) in the entire system makes for a slop-free setup and conveys quality over cost savings. It may be built for retrofitters, but the fit and finish is on-par with any OEM projector.

Worth it? If you want the latest and greatest, Then yes. It is. Go for a comparable Bi-xenon setup and you'll need to buy big money bulbs, ballasts, and a relay harness for about the same price. Go for something like the UPS Power Plus Bi-LED / Hybrid laser projectors and you'll spend much more and can forget about an easy install. Morimoto's M LED 2.0 projectors may seem expensive on the surface, but you pay for what you get, and all things considered, they've got the most bang for the buck in the business right now.


WHAT'S INCLUDED
PROJECTORS: 2x Morimoto M LED 2.0 Bi-LED LHD
LED DRIVERS: 2x M LED 2.0
HARDWARE: 2x Threaded shafts w/ lock rings
WARRANTY: 5 Years


COMPATIBILITY
APPLICATIONS: Universal (cars/trucks/motorcycles)
DIRECT FITMENT: H4 Fog Lights (little/no mods required)
MODS REQUIRED: H1,H7,H11,H13,9005,9006,9007 housings
BOLT PATTERN: Morimoto Mini D2S 4.0 Standard
INPUT VOLTAGE: 9-16V DC
UNITED STATES: LHD (Left Hand Drive)
SHROUDS: All Styles Except "Mini" or "Square"
CENTRIC RINGS: Not Required

TECH SPECS
HEIGHT: 82mm
WIDTH: 95mm
DEPTH: 150mm (w/ shaft)
DEPTH: 124mm (w/o shaft)
LENS DIAMETER: 3.0" round
SHAFT DIAMETER: 35mm
HOUSING DEPTH: 124mm Minimum
STANDARD LENS: 100% clarity "Kuria Optic" glass
BOLT PATTERN: :D2S 4.0/5.0 Standard
INPUT VOLTAGE: 9-30V
MAIN BEAM: 29.5W (consumed)
MAIN BEAM OUTPUT: 70,000CD
DRIVER OUTPIT: 2,250 mA
KELVIN RATING: 6300K
LED SPEC: HML-3 7545 w/ Ceramic Substrate & ESD Protection
OPERATING TEMP: -40C to +60C




What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
T.C.
Best projector on the market imo

This is a great product through and through and the pic I attached is through 30% window tint

M
Matt S.
Phenomenal

Great throw forward, amazing side illumination. Beautiful cutoff and good color flicker.

E
Eric L.

Best LED projector with the size limitation, it’s perfect setup for all my retrofits

A
Aharon C.
1999 Lincoln Town Car Retrofit

Nut & bolt option was the way to go mounting the M LED 2s in my 98-02 Town Car composite lamp assemblies which are very compact depth-wise. First I tried shaft-mounted but they stuck out too far, so nut & bolt was the only option and it's really easy when to get the hang of.
Beam berformance is substantially better than the generic Mini H1s I had before, I will never go generic projectors again, as a casual retrofitter it's now brand name or bust.
Unlike the previous M LED 2s I retrofit in my Mercury Grand Marquis the high beam input now powers on the LEDs as well as open the shutter, so no relays were needed this time to keep power to the low beam input when using high beam on a 9007 harness, as my Town Car does.
The M LED 2s work very well with the Mini HBs as they are the same color temperature, and dedicated high beams are the best high beams. 10/10 I would use M LED 2 again.

O
Odin H.
Amazing product

My lights are way brighter now on my 07 Tacoma with the M LED 2.0