Morimoto MC: Endicators Morimoto MC: Endicators Morimoto When Riding: Your ability to see and be seen are extremely important....and as a bunch of motorheads ourselves, there are two things that can ruin the two wheel experience; 1) other idiots on the road, 2) other idiots on the road, and 3) boring stock parts. The new Endicators from Morimoto help solve both of these problems! Mr. Clean: There's nothing worse than stock signals sticking out like a sore thumb on your custom motorcycle. Here, less is definitely more since the Endicators keep you street legal with less clutter. Nailed it! Industry First: Bright white LED daytime running light that illuminates from both the front and back and end of the unit to provide visibility to others while you ride along. Hit the turn signal, and the white daytime running light turns off and the equally bright amber LED signal flashes. The white DRL will automatically return once the signal stops. Now thats trick! All In The Optics: Outfitted with completely custom optics that help to distribute the light evenly and in all the right directions, there is more tech going on here than what simply meets the eye from the outside. Behind those optics, CREE XBD LED chips are driven by proprietary voltage regulators, giving these a virtually infinite lifespan. Compatible: With traditional handlebars, clip-ons, ape hangers, drag bars, etc. really any style you're rocking on your bike. They include three different rubber compression fittings allowing them to fit tightly inside of handlebars that range from 14-20mm in inside diameter. Tighten the 9mm nut with an open-ended wrench at the base just enough to expand the rubber fitting. Route the wiring over to the triple tree and out the handlebar. Press the bar end in place. Done. Bearded: OK so they don't have a beard, nor can we guarantee they'll make yours grow in any thicker, but they sure are beefy! Their body is CNC machined from a single block of 6061 billet aluminum, then anodized with a beautiful black finish. Functional. Looks good. Built to Last. Won't break the bank. We like it! Hyper Flash: If you're riding a BMW or other CANBUS-equipped bike and plan to replace the original incandescent signals all together with these: You may need to add some resistors into the circuit to avoid hyper flashing. If you're just adding these in conjunction with the OEM turn signals, they should draw so little power that the bike's computer won't be of the wiser. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDED Indicators: 2x Universal Switchback Bar EndWarranty: 3 Years COMPATIBILITY Fitments: 14-20mm Bar Ends (measured opening inside the bar)Replacing Stock Indicators: Should Use Resistors TECH SPECS Color Rating: 5500K (white)Intensity 500lm raw (white)LED Chip: 9x CREE XBDCurrent Load: 270mA (White) 230mA (Amber)Voltage Range: 9-30V DCWire Length: 750mm / 29.53in (total)Wire Thickness: 18 AWG

Morimoto MC: Endicators

Code: ENDICATORS
$100.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $39

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

When Riding: Your ability to see and be seen are extremely important....and as a bunch of motorheads ourselves, there are two things that can ruin the two wheel experience; 1) other idiots on the road, 2) other idiots on the road, and 3) boring stock parts. The new Endicators from Morimoto help solve both of these problems!

Mr. Clean: There's nothing worse than stock signals sticking out like a sore thumb on your custom motorcycle. Here, less is definitely more since the Endicators keep you street legal with less clutter. Nailed it!

Industry First: Bright white LED daytime running light that illuminates from both the front and back and end of the unit to provide visibility to others while you ride along. Hit the turn signal, and the white daytime running light turns off and the equally bright amber LED signal flashes. The white DRL will automatically return once the signal stops. Now thats trick!

All In The Optics: Outfitted with completely custom optics that help to distribute the light evenly and in all the right directions, there is more tech going on here than what simply meets the eye from the outside. Behind those optics, CREE XBD LED chips are driven by proprietary voltage regulators, giving these a virtually infinite lifespan.

Compatible: With traditional handlebars, clip-ons, ape hangers, drag bars, etc. really any style you're rocking on your bike. They include three different rubber compression fittings allowing them to fit tightly inside of handlebars that range from 14-20mm in inside diameter. Tighten the 9mm nut with an open-ended wrench at the base just enough to expand the rubber fitting. Route the wiring over to the triple tree and out the handlebar. Press the bar end in place. Done.

Bearded: OK so they don't have a beard, nor can we guarantee they'll make yours grow in any thicker, but they sure are beefy! Their body is CNC machined from a single block of 6061 billet aluminum, then anodized with a beautiful black finish. Functional. Looks good. Built to Last. Won't break the bank. We like it!

Hyper Flash: If you're riding a BMW or other CANBUS-equipped bike and plan to replace the original incandescent signals all together with these: You may need to add some resistors into the circuit to avoid hyper flashing. If you're just adding these in conjunction with the OEM turn signals, they should draw so little power that the bike's computer won't be of the wiser.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED

Indicators: 2x Universal Switchback Bar End
Warranty: 3 Years
COMPATIBILITY
Fitments: 14-20mm Bar Ends (measured opening inside the bar)
Replacing Stock Indicators: Should Use Resistors
TECH SPECS
Color Rating: 5500K (white)
Intensity 500lm raw (white)
LED Chip: 9x CREE XBD
Current Load: 270mA (White) 230mA (Amber)
Voltage Range: 9-30V DC
Wire Length: 750mm / 29.53in (total)
Wire Thickness: 18 AWG

When Riding: Your ability to see and be seen are extremely important....and as a bunch of motorheads ourselves, there are two things that can ruin the two wheel experience; 1) other idiots on the road, 2) other idiots on the road, and 3) boring stock parts. The new Endicators from Morimoto help solve both of these problems!

Mr. Clean: There's nothing worse than stock signals sticking out like a sore thumb on your custom motorcycle. Here, less is definitely more since the Endicators keep you street legal with less clutter. Nailed it!

Industry First: Bright white LED daytime running light that illuminates from both the front and back and end of the unit to provide visibility to others while you ride along. Hit the turn signal, and the white daytime running light turns off and the equally bright amber LED signal flashes. The white DRL will automatically return once the signal stops. Now thats trick!

All In The Optics: Outfitted with completely custom optics that help to distribute the light evenly and in all the right directions, there is more tech going on here than what simply meets the eye from the outside. Behind those optics, CREE XBD LED chips are driven by proprietary voltage regulators, giving these a virtually infinite lifespan.

Compatible: With traditional handlebars, clip-ons, ape hangers, drag bars, etc. really any style you're rocking on your bike. They include three different rubber compression fittings allowing them to fit tightly inside of handlebars that range from 14-20mm in inside diameter. Tighten the 9mm nut with an open-ended wrench at the base just enough to expand the rubber fitting. Route the wiring over to the triple tree and out the handlebar. Press the bar end in place. Done.

Bearded: OK so they don't have a beard, nor can we guarantee they'll make yours grow in any thicker, but they sure are beefy! Their body is CNC machined from a single block of 6061 billet aluminum, then anodized with a beautiful black finish. Functional. Looks good. Built to Last. Won't break the bank. We like it!

Hyper Flash: If you're riding a BMW or other CANBUS-equipped bike and plan to replace the original incandescent signals all together with these: You may need to add some resistors into the circuit to avoid hyper flashing. If you're just adding these in conjunction with the OEM turn signals, they should draw so little power that the bike's computer won't be of the wiser.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED

Indicators: 2x Universal Switchback Bar End
Warranty: 3 Years
COMPATIBILITY Fitments: 14-20mm Bar Ends (measured opening inside the bar)
Replacing Stock Indicators: Should Use Resistors
TECH SPECS Color Rating: 5500K (white)
Intensity 500lm raw (white)
LED Chip: 9x CREE XBD
Current Load: 270mA (White) 230mA (Amber)
Voltage Range: 9-30V DC
Wire Length: 750mm / 29.53in (total)
Wire Thickness: 18 AWG

What is your shipping cutoff time? 

Cutoff time is 3pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $39 qualify for free shipping within the United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE