D1S: Morimoto XB55 D1S: Morimoto XB55 Morimoto Trusted: With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. Easily filling the shoes of the 3Five units that they replace, the brand new XB35 ballasts excel in every way. Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts. Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output. Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets. Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced. Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process. Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up. Reliable and Smart: The XB35 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct. Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB35 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDED Ballasts: Morimoto XB55 (Pair) Igniters: Morimoto XB D1S/D3S (Pair) Brackets: Eight Point Painted Steel Warranty: Two Years ELECTRICAL Output: 50W Ignition Voltage 23KV Input Voltage: AC85 9-32V Input Current: < 5A Open Circuit: Protected (< 1s) Short Circuit: Protected (< 1s) Climate Range: -40C to +85C Rated Lifetime: 2500hours (6-10 years) DIMENSIONS Length (mm): 82 Width (mm): 68 Thickness (mm): 17 Output Length (cm): 35 COMPATIBILTY Input: Industry Standard "9006" Plug Outputs: D1S/D3S

D1S: Morimoto XB55

Code: MORIMOTOD1SBALLASTS55W
$120.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $39

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Trusted: With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. Easily filling the shoes of the 3Five units that they replace, the brand new XB35 ballasts excel in every way.

Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.

Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.

Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.

Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

Reliable and Smart: The XB35 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.

Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB35 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED
Ballasts: Morimoto XB55 (Pair)
Igniters: Morimoto XB D1S/D3S (Pair)
Brackets: Eight Point Painted Steel
Warranty: Two Years

ELECTRICAL
Output: 50W
Ignition Voltage 23KV
Input Voltage: AC85 9-32V
Input Current: < 5A
Open Circuit: Protected (< 1s)
Short Circuit: Protected (< 1s)
Climate Range: -40C to +85C
Rated Lifetime: 2500hours (6-10 years)
DIMENSIONS
Length (mm): 82
Width (mm): 68
Thickness (mm): 17
Output Length (cm): 35
COMPATIBILTY
Input: Industry Standard "9006" Plug
Outputs: D1S/D3S

Trusted: With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. Easily filling the shoes of the 3Five units that they replace, the brand new XB35 ballasts excel in every way.

Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.

Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.

Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.

Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

Reliable and Smart: The XB35 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.

Functional Works of Art: Designed by Artur Saakyan in California, the Morimoto XB35 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED Ballasts: Morimoto XB55 (Pair) Igniters: Morimoto XB D1S/D3S (Pair) Brackets: Eight Point Painted Steel Warranty: Two Years
ELECTRICAL
Output: 50W Ignition Voltage 23KV Input Voltage: AC85 9-32V Input Current: < 5A Open Circuit: Protected (< 1s) Short Circuit: Protected (< 1s) Climate Range: -40C to +85C Rated Lifetime: 2500hours (6-10 years) DIMENSIONS Length (mm): 82 Width (mm): 68 Thickness (mm): 17 Output Length (cm): 35 COMPATIBILTY Input: Industry Standard "9006" Plug Outputs: D1S/D3S

What is your shipping cutoff time? 

Cutoff time is 3pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $39 qualify for free shipping within the United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE