Mustang OEM HID Conversion (2010-2012) Mustang OEM HID Conversion (2010-2012) Morimoto Modernize: Designed to adapt the 2010-2012 Ford Mustang OEM Bi-xenon headlights onto cars that came standard with base H13 Halogen headlamps, this harness will allow you to upgrade to the most modern Mustang look and performance without cutting, splicing, or modifying anything on the car's factory harness. Plug n Play: It's a seamless solution to keep your low and high beams under control on the new OEM HID lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each OEM HID headlight from Ford. Advanced: The third generation Morimoto MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector was given an update in late 2015 and is a major reliability upgrade compared to other bi-xenon harnesses. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV's, everything is clearly labeled, and it's designed to be 100% plug and play (no cutting or splicing needed). OEM Grade: Aside from being ahead of the game from a technical standpoint, the Ford Mustang Conversion harness is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood! Tech Specs: INPUT TRIGGER:::1x H13/9008 Male|HEADLIGHT OUTPUTS:::Proprietary Ford Multipin|12V POWER:::1x Nickel-Plated Ring-Type|GROUNDS:::2x Nickel-Plated Ring-Type|FUSE:::Inline 25A What's Included: Wiring:::1x 10-12 Mustang OEM HID Conversion Harness|Warranty:::2 Years Compatibility: FORD MUSTANG:::2010-2012 w/ OEM Halogen Headlights|HEADLIGHTS:::2010-2012 Mustang OEM HID|BALLASTS:::OEM Ford Green Label D1S/D3S Only |NOTICE:::Orange Label D1S ballasts require snipping the green wire on the ballast input (inside the headlight)

Mustang OEM HID Conversion (2010-2012)

Code: H111
$100.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Modernize: Designed to adapt the 2010-2012 Ford Mustang OEM Bi-xenon headlights onto cars that came standard with base H13 Halogen headlamps, this harness will allow you to upgrade to the most modern Mustang look and performance without cutting, splicing, or modifying anything on the car's factory harness.

Plug n Play: It's a seamless solution to keep your low and high beams under control on the new OEM HID lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each OEM HID headlight from Ford.

Advanced: The third generation Morimoto MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector was given an update in late 2015 and is a major reliability upgrade compared to other bi-xenon harnesses.

Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV's, everything is clearly labeled, and it's designed to be 100% plug and play (no cutting or splicing needed).

OEM Grade: Aside from being ahead of the game from a technical standpoint, the Ford Mustang Conversion harness is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood!

  • Tech Specs: INPUT TRIGGER:::1x H13/9008 Male|HEADLIGHT OUTPUTS:::Proprietary Ford Multipin|12V POWER:::1x Nickel-Plated Ring-Type|GROUNDS:::2x Nickel-Plated Ring-Type|FUSE:::Inline 25A
  • What's Included: Wiring:::1x 10-12 Mustang OEM HID Conversion Harness|Warranty:::2 Years
  • Compatibility: FORD MUSTANG:::2010-2012 w/ OEM Halogen Headlights|HEADLIGHTS:::2010-2012 Mustang OEM HID|BALLASTS:::OEM Ford Green Label D1S/D3S Only |NOTICE:::Orange Label D1S ballasts require snipping the green wire on the ballast input (inside the headlight)

Modernize: Designed to adapt the 2010-2012 Ford Mustang OEM Bi-xenon headlights onto cars that came standard with base H13 Halogen headlamps, this harness will allow you to upgrade to the most modern Mustang look and performance without cutting, splicing, or modifying anything on the car's factory harness.

Plug n Play: It's a seamless solution to keep your low and high beams under control on the new OEM HID lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each OEM HID headlight from Ford.

Advanced: The third generation Morimoto MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector was given an update in late 2015 and is a major reliability upgrade compared to other bi-xenon harnesses.

Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections; even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUV's, everything is clearly labeled, and it's designed to be 100% plug and play (no cutting or splicing needed).

OEM Grade: Aside from being ahead of the game from a technical standpoint, the Ford Mustang Conversion harness is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood!

  • Tech Specs: INPUT TRIGGER:::1x H13/9008 Male|HEADLIGHT OUTPUTS:::Proprietary Ford Multipin|12V POWER:::1x Nickel-Plated Ring-Type|GROUNDS:::2x Nickel-Plated Ring-Type|FUSE:::Inline 25A
  • What's Included: Wiring:::1x 10-12 Mustang OEM HID Conversion Harness|Warranty:::2 Years
  • Compatibility: FORD MUSTANG:::2010-2012 w/ OEM Halogen Headlights|HEADLIGHTS:::2010-2012 Mustang OEM HID|BALLASTS:::OEM Ford Green Label D1S/D3S Only |NOTICE:::Orange Label D1S ballasts require snipping the green wire on the ballast input (inside the headlight)

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)