Demon Eyes: Profile Prism (RGB) Demon Eyes: Profile Prism (RGB) Profile Performance Profile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to demon eyes; easily the one we recommend. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old; Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. Their Prism RGB Demon Eyes are unrivaled, and here's why. Mean Looking: Designed with a universal mount that will fit a wide range of aftermarket and OEM projectors with ease; the Prism Demon Eyes will add an ambient glow in virtually any color just behind your projector lenses. In combination with our custom lens etching service, you can create one mean looking set of headlights! What's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the new Profile Prism Demon Eyes and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller & smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it! Intensity: Unlike most other RGB Demon eyes on the market that use a singular RGB chip, the Profile Prism RGB demon eyes are illuminated by 12 individual RGB LEDs to produce plenty of intensity in all colors! On top of that, they come with a specially designed optical reflector to direct all of light forward and through the projector lens. This not only helps make them brighter than anything else out there, but creates a beam pattern of its own on the ground in front of your car. Do you need that? No, do you want that? Yes...and besides, overkill is underrated! Reliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin. The Prism drivers have a “shut off” wire going into them that we recommend connecting with your low beam circuit – so that when the projectors heat up, the demon eyes automatically turn off. Reliability: Check! Plug N Play: Even older systems from LED Concepts required complicated “DIY” wiring from the user's side, but all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside an aluminum housing that's been anodized with an attractive piano black finish and laser engraved with the Profile Prism graphics. Make sure your setup looks good inside and out! Remote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. Brackets:Though the singular mounting point on the Prism Demon Eyes make them "universal" - It only makes sense to offer bracket options that make them a direct-fit for some of today's most popular projectors. If you're retrofitting with Mini H1's (of any generation; some mods req'd), Profile Performance Optic D2S, or the Morimoto 4.0's / MLED; then you're in luck! Just add a set of the brackets for an easy bolt-on style setup. Yeeee ha! Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDED Demon Eyes: 2x Profile Prism LED (RGB)Drivers: 2x XBT LEDOptional Controller: 1x XBT BluetoothOptional Brackets: For Mini H1 or Mini D2SWarranty: 3 Years COMPATIBILITY System Input: +/- 12VConnections: JST 4 PinHeadlights: Any with projectors (custom mounting)W/ Brackets: Mini H1 (all; mod's required) or Mini D2S (3.0/4.0)Note: May interfere with some RetroQuik bracketsMorimoto Controller: XBT Bluetooth (Recommended)Profile Controller: PrismPilot RFOther Controller: All 4-Wire RGB+Other Uses: Not to be used externally TECH SPECS Modes: Strobe, Flash, FadePrimary Function: RGBLight Source: Proprietary SMD LEDExpected Lifespan: 50,000 hoursPCB Material: AluminumSpacer Material: Carbon FiberBracket Material: Stainless SteelDriver Housing: ANODIZED AL :Driver Protection: Full internal Potting

Demon Eyes: Profile Prism (RGB)

Code: LED122
$70.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $99

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Installation Guide: Click to download

Profile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to demon eyes; easily the one we recommend. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old; Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. Their Prism RGB Demon Eyes are unrivaled, and here's why.

Mean Looking: Designed with a universal mount that will fit a wide range of aftermarket and OEM projectors with ease; the Prism Demon Eyes will add an ambient glow in virtually any color just behind your projector lenses. In combination with our custom lens etching service, you can create one mean looking set of headlights!

What's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the new Profile Prism Demon Eyes and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller & smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!

Intensity: Unlike most other RGB Demon eyes on the market that use a singular RGB chip, the Profile Prism RGB demon eyes are illuminated by 12 individual RGB LEDs to produce plenty of intensity in all colors! On top of that, they come with a specially designed optical reflector to direct all of light forward and through the projector lens. This not only helps make them brighter than anything else out there, but creates a beam pattern of its own on the ground in front of your car. Do you need that? No, do you want that? Yes...and besides, overkill is underrated!

Reliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin. The Prism drivers have a “shut off” wire going into them that we recommend connecting with your low beam circuit – so that when the projectors heat up, the demon eyes automatically turn off. Reliability: Check!

Plug N Play: Even older systems from LED Concepts required complicated “DIY” wiring from the user's side, but all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside an aluminum housing that's been anodized with an attractive piano black finish and laser engraved with the Profile Prism graphics. Make sure your setup looks good inside and out!

Remote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control.

Brackets:Though the singular mounting point on the Prism Demon Eyes make them "universal" - It only makes sense to offer bracket options that make them a direct-fit for some of today's most popular projectors. If you're retrofitting with Mini H1's (of any generation; some mods req'd), Profile Performance Optic D2S, or the Morimoto 4.0's / MLED; then you're in luck! Just add a set of the brackets for an easy bolt-on style setup. Yeeee ha!

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED

Demon Eyes: 2x Profile Prism LED (RGB)
Drivers: 2x XBT LED
Optional Controller: 1x XBT Bluetooth
Optional Brackets: For Mini H1 or Mini D2S
Warranty: 3 Years

COMPATIBILITY

System Input: +/- 12V
Connections: JST 4 Pin
Headlights: Any with projectors (custom mounting)
W/ Brackets: Mini H1 (all; mod's required) or Mini D2S (3.0/4.0)
Note: May interfere with some RetroQuik brackets
Morimoto Controller: XBT Bluetooth (Recommended)
Profile Controller: PrismPilot RF
Other Controller: All 4-Wire RGB+
Other Uses: Not to be used externally

TECH SPECS

Modes: Strobe, Flash, Fade
Primary Function: RGB
Light Source: Proprietary SMD LED
Expected Lifespan: 50,000 hours
PCB Material: Aluminum
Spacer Material: Carbon Fiber
Bracket Material: Stainless Steel
Driver Housing: ANODIZED AL :
Driver Protection: Full internal Potting

Profile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to demon eyes; easily the one we recommend. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old; Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. Their Prism RGB Demon Eyes are unrivaled, and here's why.

Mean Looking: Designed with a universal mount that will fit a wide range of aftermarket and OEM projectors with ease; the Prism Demon Eyes will add an ambient glow in virtually any color just behind your projector lenses. In combination with our custom lens etching service, you can create one mean looking set of headlights!

What's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the new Profile Prism Demon Eyes and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller & smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!

Intensity: Unlike most other RGB Demon eyes on the market that use a singular RGB chip, the Profile Prism RGB demon eyes are illuminated by 12 individual RGB LEDs to produce plenty of intensity in all colors! On top of that, they come with a specially designed optical reflector to direct all of light forward and through the projector lens. This not only helps make them brighter than anything else out there, but creates a beam pattern of its own on the ground in front of your car. Do you need that? No, do you want that? Yes...and besides, overkill is underrated!

Reliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin. The Prism drivers have a “shut off” wire going into them that we recommend connecting with your low beam circuit – so that when the projectors heat up, the demon eyes automatically turn off. Reliability: Check!

Plug N Play: Even older systems from LED Concepts required complicated “DIY” wiring from the user's side, but all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside an aluminum housing that's been anodized with an attractive piano black finish and laser engraved with the Profile Prism graphics. Make sure your setup looks good inside and out!

Remote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control.

Brackets:Though the singular mounting point on the Prism Demon Eyes make them "universal" - It only makes sense to offer bracket options that make them a direct-fit for some of today's most popular projectors. If you're retrofitting with Mini H1's (of any generation; some mods req'd), Profile Performance Optic D2S, or the Morimoto 4.0's / MLED; then you're in luck! Just add a set of the brackets for an easy bolt-on style setup. Yeeee ha!

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED

Demon Eyes: 2x Profile Prism LED (RGB)
Drivers: 2x XBT LED
Optional Controller: 1x XBT Bluetooth
Optional Brackets: For Mini H1 or Mini D2S
Warranty: 3 Years

COMPATIBILITY

System Input: +/- 12V
Connections: JST 4 Pin
Headlights: Any with projectors (custom mounting)
W/ Brackets: Mini H1 (all; mod's required) or Mini D2S (3.0/4.0)
Note: May interfere with some RetroQuik brackets
Morimoto Controller: XBT Bluetooth (Recommended)
Profile Controller: PrismPilot RF
Other Controller: All 4-Wire RGB+
Other Uses: Not to be used externally

TECH SPECS

Modes: Strobe, Flash, Fade
Primary Function: RGB
Light Source: Proprietary SMD LED
Expected Lifespan: 50,000 hours
PCB Material: Aluminum
Spacer Material: Carbon Fiber
Bracket Material: Stainless Steel
Driver Housing: ANODIZED AL :
Driver Protection: Full internal Potting

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jesus M.
Rgb demon eyes

Great product, I can’t never be disappointed when i get parts with you guys!!! Thank you so much!

1
1111 Z.-.D.A.
Demon eyes better than any other

Great product so bright and colors looking perfect even with direct sun

J
Justin V.
Profile Performance Prism Demon Eyes

Reliable, easy to mount, and just overall a solid product! Can’t beat these when paired with the Morimoto XBT Bluetooth Controller!

A
Andrew S.
Great demon eyes

I have used several sets of these demon eyes, paired with Morimoto XBT control module, and the mounting is simple, and low profile. Easily controlled with the Morimoto app, and adds a great look to the headlights. This has been my go to for demon eyes!