TRIGGER DIN Connector Harness TRIGGER DIN Connector Harness Trigger TRIGGER DIN Connector Harness Watch the video overview HEREUsing the built-in DIN connector on the Trigger 6 Shooter or 4 Plus, connect our TRIGGER DIN Connector Harness for manual control of conventional rocker switches.Harness is 12 ft long.Important: When installing the DIN cable to the controller, be sure power is off before inserting the connector. The yellow wire on the controller is power on/off, be sure it has no power going into it before connection.The DIN harness allows you to use conventional rocker switches with Trigger…for example, lets say you already have accessories wired up in the traditional way, with mechanical relays and a nest of wires. Using the DIN harness you can remove the mechanical relays and wiring currently powering your accessories, connect the conventional rockers to the Trigger via the DIN harness, and then connect the accessories to the Trigger. Now the conventional rockers are basically sending a signal through the DIN harness to the Trigger which then controls power distribution to the accessories. Make sense?The end result is a cleaner installation (we’ve gotten rid of the relay/wiring mess) and we’ve added yet another way to control your accessories…now you’ve got four different ways to control your accessories through the Trigger: 1) buttons on the control box, 2) RF remote, 3) App on your phone, and 4) conventional rockers with the DIN harness.Wire Color Codes:Red = Ch 1Green = Ch 2Blue = Ch 3Yellow = Ch 4White = Ch 5Brown = Ch 6Black Chain = GroundRed Chain = Power Click Here To View the DIN Harness Wiring Diagram Of course, use this with the TRIGGER 6 Shooter Wireless Accessory ControllerAlso works with with our TRIGGER 4 PLUS Wireless Accessory ControllerNeed longer cable runs? Check these out: TRIGGER ACS 14 Gauge Long Harness and the TRIGGER ACS 12 Gauge Short Y Harness

TRIGGER DIN Connector Harness

Code: 3012
$38.97
In Stock
Item ships direct from vendor.
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $99

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

TRIGGER DIN Connector Harness


Watch the video overview HERE

Using the built-in DIN connector on the Trigger 6 Shooter or 4 Plus, connect our TRIGGER DIN Connector Harness for manual control of conventional rocker switches.

Harness is 12 ft long.

Important: When installing the DIN cable to the controller, be sure power is off before inserting the connector. The yellow wire on the controller is power on/off, be sure it has no power going into it before connection.

The DIN harness allows you to use conventional rocker switches with Trigger…for example, lets say you already have accessories wired up in the traditional way, with mechanical relays and a nest of wires. Using the DIN harness you can remove the mechanical relays and wiring currently powering your accessories, connect the conventional rockers to the Trigger via the DIN harness, and then connect the accessories to the Trigger. Now the conventional rockers are basically sending a signal through the DIN harness to the Trigger which then controls power distribution to the accessories. Make sense?

The end result is a cleaner installation (we’ve gotten rid of the relay/wiring mess) and we’ve added yet another way to control your accessories…now you’ve got four different ways to control your accessories through the Trigger: 1) buttons on the control box, 2) RF remote, 3) App on your phone, and 4) conventional rockers with the DIN harness.

Wire Color Codes:
Red = Ch 1
Green = Ch 2
Blue = Ch 3
Yellow = Ch 4
White = Ch 5
Brown = Ch 6
Black Chain = Ground
Red Chain = Power


Click Here To View the DIN Harness Wiring Diagram


Of course, use this with the TRIGGER 6 Shooter Wireless Accessory Controller

Also works with with our TRIGGER 4 PLUS Wireless Accessory Controller

Need longer cable runs? Check these out: TRIGGER ACS 14 Gauge Long Harness and the TRIGGER ACS 12 Gauge Short Y Harness

TRIGGER DIN Connector Harness


Watch the video overview HERE

Using the built-in DIN connector on the Trigger 6 Shooter or 4 Plus, connect our TRIGGER DIN Connector Harness for manual control of conventional rocker switches.

Harness is 12 ft long.

Important: When installing the DIN cable to the controller, be sure power is off before inserting the connector. The yellow wire on the controller is power on/off, be sure it has no power going into it before connection.

The DIN harness allows you to use conventional rocker switches with Trigger…for example, lets say you already have accessories wired up in the traditional way, with mechanical relays and a nest of wires. Using the DIN harness you can remove the mechanical relays and wiring currently powering your accessories, connect the conventional rockers to the Trigger via the DIN harness, and then connect the accessories to the Trigger. Now the conventional rockers are basically sending a signal through the DIN harness to the Trigger which then controls power distribution to the accessories. Make sense?

The end result is a cleaner installation (we’ve gotten rid of the relay/wiring mess) and we’ve added yet another way to control your accessories…now you’ve got four different ways to control your accessories through the Trigger: 1) buttons on the control box, 2) RF remote, 3) App on your phone, and 4) conventional rockers with the DIN harness.

Wire Color Codes:
Red = Ch 1
Green = Ch 2
Blue = Ch 3
Yellow = Ch 4
White = Ch 5
Brown = Ch 6
Black Chain = Ground
Red Chain = Power


Click Here To View the DIN Harness Wiring Diagram


Of course, use this with the TRIGGER 6 Shooter Wireless Accessory Controller

Also works with with our TRIGGER 4 PLUS Wireless Accessory Controller

Need longer cable runs? Check these out: TRIGGER ACS 14 Gauge Long Harness and the TRIGGER ACS 12 Gauge Short Y Harness

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)