TRIGGER 6 SHOOTER Wireless Accessory Control System TRIGGER 6 SHOOTER Wireless Accessory Control System Trigger TRIGGER 6 SHOOTER Wireless Accessory Control System The Trigger 6 SHOOTER Wireless Accessory Control System substantially saves your electronic accessories’ installation time! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses.The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remote’s. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote.The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.A few notable features:Accepts 12-24 Volt inputTwo 30, two 10, and two 5 amp fused circuitsBuilt-in Bluetooth battery monitor – see connected battery voltage in real-time on the TRIGGER ACS PLUS appIncludes six 8 foot long wire harnesses with waterproof connectorsWireless back-lit RF remote rocker switch moduleSet custom backlight colors on the remote!Backlit switches when optionally connected to 12 Volt power via an 8′ long, thin 28 gauge harnessYou can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!Comes with switch labels too!NOW FEATURED IN ‘THE SHOP’ MAGAZINE! CLICK TO CHECK OUT THE ARTICLE!Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.View Our Installation Quick Start Guide The RF remote will work right out of the box, however, the reprogramming steps can only be accomplished when the base is energized using the included harness.View the RF Remote Wiring Diagram View the RF Remote Wiring Diagram for Jeep JKPlease note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter

TRIGGER 6 SHOOTER Wireless Accessory Control System

Code: 3001
$407.99
In Stock
Item ships direct from vendor.
Add to Wishlist Add to Compare
  • FREE SHIPPING
    ORDERS OVER $99

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

TRIGGER 6 SHOOTER Wireless Accessory Control System


The Trigger 6 SHOOTER Wireless Accessory Control System substantially saves your electronic accessories’ installation time! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses.

The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remote’s. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote.

The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.

A few notable features:

Accepts 12-24 Volt input
Two 30, two 10, and two 5 amp fused circuits
Built-in Bluetooth battery monitor – see connected battery voltage in real-time on the TRIGGER ACS PLUS app
Includes six 8 foot long wire harnesses with waterproof connectors
Wireless back-lit RF remote rocker switch module
Set custom backlight colors on the remote!
Backlit switches when optionally connected to 12 Volt power via an 8′ long, thin 28 gauge harness
You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
Comes with switch labels too!
NOW FEATURED IN ‘THE SHOP’ MAGAZINE! CLICK TO CHECK OUT THE ARTICLE!
Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.

View Our Installation Quick Start Guide


The RF remote will work right out of the box, however, the reprogramming steps can only be accomplished when the base is energized using the included harness.

View the RF Remote Wiring Diagram

View the RF Remote Wiring Diagram for Jeep JK

Please note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter

TRIGGER 6 SHOOTER Wireless Accessory Control System


The Trigger 6 SHOOTER Wireless Accessory Control System substantially saves your electronic accessories’ installation time! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses.

The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remote’s. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote.

The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.

A few notable features:

Accepts 12-24 Volt input
Two 30, two 10, and two 5 amp fused circuits
Built-in Bluetooth battery monitor – see connected battery voltage in real-time on the TRIGGER ACS PLUS app
Includes six 8 foot long wire harnesses with waterproof connectors
Wireless back-lit RF remote rocker switch module
Set custom backlight colors on the remote!
Backlit switches when optionally connected to 12 Volt power via an 8′ long, thin 28 gauge harness
You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
Comes with switch labels too!
NOW FEATURED IN ‘THE SHOP’ MAGAZINE! CLICK TO CHECK OUT THE ARTICLE!
Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.

View Our Installation Quick Start Guide


The RF remote will work right out of the box, however, the reprogramming steps can only be accomplished when the base is energized using the included harness.

View the RF Remote Wiring Diagram

View the RF Remote Wiring Diagram for Jeep JK

Please note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)