VLR-3 RESISTOR W/ DUOTAP HARNESS VLR-3 RESISTOR W/ DUOTAP HARNESS VLEDS The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the included DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers. Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX). Construction: Utilizing a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a male waterproof circular connector. Electrical: Where tapping into your factory wiring is needed, the included DuoTap harness is highly recommended for a quick and easy no cutting connection! They literally take just minutes to install! Using the DuoTap connectors, insert one ground/chassis wire, and one turn/brake wire and squeeze DuoTap closed with pliers. If you ever need to upgrade or service the resistor simply remove and plug the new one in. If you have our V6 Triton LED turn signal system, the VLR Pro conveniently plugs in-line into the T adapter (sold separately). Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat clean metal surface on the vehicle. As an extra precaution: VLR Pro resistors should be mounted out of harm's way and should not touch any plastic or other wiring. For exterior applications we recommend filling the DuoTap with our dielectric grease. INCLUDES 1 - VLR-3 Resistor 1 - DuoTap Harness 1 - 3M Mounting Tape TECHNICAL SPECS COMPARISON VLR-3 (this item)Current Draw: 3.8A @ 12V | 4.5A @ 14.4VLoad = 2 standard filament bulbs (equivalent wattage: 50W) VLR-6 Current Draw: 1.9A @ 12V | 2.25A @ 14.4V Load = 1 standard filament bulb (equivalent wattage: 25W) Learn more about adding load to your lighting system HERE. One VLR-3 is equal to the load of two 25W filament bulbs.

VLR-3 RESISTOR W/ DUOTAP HARNESS

Code: VLR_3_DUO
$20.00
In Stock
Item ships direct from vendor.
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the included DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Utilizing a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a male waterproof circular connector.

Electrical: Where tapping into your factory wiring is needed, the included DuoTap harness is highly recommended for a quick and easy no cutting connection! They literally take just minutes to install! Using the DuoTap connectors, insert one ground/chassis wire, and one turn/brake wire and squeeze DuoTap closed with pliers. If you ever need to upgrade or service the resistor simply remove and plug the new one in. If you have our V6 Triton LED turn signal system, the VLR Pro conveniently plugs in-line into the T adapter (sold separately).

Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat clean metal surface on the vehicle. As an extra precaution: VLR Pro resistors should be mounted out of harm's way and should not touch any plastic or other wiring.

For exterior applications we recommend filling the DuoTap with our dielectric grease.

INCLUDES

1 - VLR-3 Resistor
1 - DuoTap Harness
1 - 3M Mounting Tape

TECHNICAL SPECS COMPARISON

VLR-3 (this item)
Current Draw: 3.8A @ 12V | 4.5A @ 14.4V
Load = 2 standard filament bulbs (equivalent wattage: 50W)

VLR-6
Current Draw: 1.9A @ 12V | 2.25A @ 14.4V
Load = 1 standard filament bulb (equivalent wattage: 25W)

Learn more about adding load to your lighting system HERE.

One VLR-3 is equal to the load of two 25W filament bulbs.

The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the included DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Utilizing a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a male waterproof circular connector.

Electrical: Where tapping into your factory wiring is needed, the included DuoTap harness is highly recommended for a quick and easy no cutting connection! They literally take just minutes to install! Using the DuoTap connectors, insert one ground/chassis wire, and one turn/brake wire and squeeze DuoTap closed with pliers. If you ever need to upgrade or service the resistor simply remove and plug the new one in. If you have our V6 Triton LED turn signal system, the VLR Pro conveniently plugs in-line into the T adapter (sold separately).

Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat clean metal surface on the vehicle. As an extra precaution: VLR Pro resistors should be mounted out of harm's way and should not touch any plastic or other wiring.

For exterior applications we recommend filling the DuoTap with our dielectric grease.

INCLUDES

1 - VLR-3 Resistor
1 - DuoTap Harness
1 - 3M Mounting Tape

TECHNICAL SPECS COMPARISON

VLR-3 (this item)
Current Draw: 3.8A @ 12V | 4.5A @ 14.4V
Load = 2 standard filament bulbs (equivalent wattage: 50W)

VLR-6
Current Draw: 1.9A @ 12V | 2.25A @ 14.4V
Load = 1 standard filament bulb (equivalent wattage: 25W)

Learn more about adding load to your lighting system HERE.

One VLR-3 is equal to the load of two 25W filament bulbs.

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Danny D.
A must for any resistor application

Replaced my gold resistors to the VLR-3. Night and day as far as the heat they put out. They still get warm,but nothing compared to the gold ones my taillights included. The build quality is A+ and puts mind to ease knowing they will handle the elements without issue.

S
Scott M.M.
XP80

Called for info on taillights they recommend xp 80. As always perfect suggestion. Thank you