Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 02-08 Mazda 6 the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new! Morimoto H1 7.0 Projectors: Morimoto has always been the benchmark when it came to the Mini H1...But no matter how many imitations popped up over the years, they just couldn't compare, and now it's most certainly too late to catch up. The 7.0 represents the most massive overhaul in Mini H1 history. Morimoto XB Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%! Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night. Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls. Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDEDSTANDARD EQUIPMENT:Projectors: Morimoto Mini H1 7.0 Bi-xenon (2x) Brackets: Precision Fit 02-08 Mazda 6 Hardware: Automotive Grade Stainless Shipping: Ships free within the US* Warranty: Five YearsOPTIONAL EQUIPMENT:HID Ballasts: Morimoto XB35 AMP HID Bulbs: Morimoto XB H1 Wire Harness: Morimoto HD Relay Headlight Sealant: RetroRubber Glue

Retro-Quik: Mazda 6 (02-08)

Code: RQMAZDA6

Add Your Review

$215.00

In Stock

Quantity

Add to Wishlist Add to Compare

FREE SHIPPING
*EXCLUSIONS APPLY
FAST
ORDER PROCESSING
HASSLE-FREE
WARRANTY & RETURNS

Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the 02-08 Mazda 6 the Morimoto Retro-Quik system uses laser cut brackets made of military-grade G10 Fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!

Morimoto XB Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%!

Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.

Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED

STANDARD EQUIPMENT:

Projectors: Morimoto Mini H1 7.0 Bi-xenon (2x)

Brackets: Precision Fit 02-08 Mazda 6

Hardware: Automotive Grade Stainless

Shipping: Ships free within the US*

Warranty: Five Years

OPTIONAL EQUIPMENT:

HID Ballasts: Morimoto XB35 AMP

HID Bulbs: Morimoto XB H1

Wire Harness: Morimoto HD Relay

Headlight Sealant: RetroRubber Glue

Morimoto H1 7.0 Projectors: Morimoto has always been the benchmark when it came to the Mini H1...But no matter how many imitations popped up over the years, they just couldn't compare, and now it's most certainly too late to catch up. The 7.0 represents the most massive overhaul in Mini H1 history. Morimoto XB Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%! Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night. Morimoto Relay Harnesses: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls. Accessorize: The optional butyl-rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the matching diameter for your shrouds. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDED

STANDARD EQUIPMENT:

Projectors: Morimoto Mini H1 7.0 Bi-xenon (2x) Brackets: Precision Fit 02-08 Mazda 6 Hardware: Automotive Grade Stainless Shipping: Ships free within the US* Warranty: Five Years

OPTIONAL EQUIPMENT:

HID Ballasts: Morimoto XB35 AMP HID Bulbs: Morimoto XB H1 Wire Harness: Morimoto HD Relay Headlight Sealant: RetroRubber Glue

What is your shipping cutoff time?

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product.

Will I receive a tracking number?

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order.

Is shipping free?

Orders over $99 qualify for free shipping within the contiguous United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option.

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date.

Shipping

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process.

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount. Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us.

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines.

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.
Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit.

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned.

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country.

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE.