Morimoto Sealed7 LED Headlight: Jeep Wrangler 2018, 2019, 2020, 2021 Morimoto Sealed7 LED Headlight: Jeep Wrangler 2018, 2019, 2020, 2021 Morimoto Just when you think: You've done your research and come across every last option in the 7" round LED market, these should catch your attention. While it's true there's only so many ways you can package a set of low and high beam LED-based optics into a 7" round platform; Morimoto's Sealed7 2.0 pulls it off in the most functional and attractive setup we've seen to date. Honestly: Here at our shop, we've seen em all and believe that the Sealed7 2.0 is the best new entry in the 7 inch Jeep Headlight market for a variety of reasons, which we'll outline below. Proprietary: The Morimoto Sealed7 2.0 is all-new, all-original from the ground up. Until now, there were basically three distinct products on the market. You have the real-deal J.W. Speaker, at the top of the totem poll. Then you have the cheap J.W. Speaker knock-offs, re-branded by companies A,B, and C, and then you have the Truck-Lite reflector-based 7" lights...again, re-branded by company X,Y, and Z. These are unlike anything else on the market. Output: In low beam mode, Nichia NCSW170CSeries LED's paired with Morimoto's advanced Kuria Optic projector lens array efficiently distributes roughly 3000 lumens on the road in a properly LHD-stepped beam pattern. Because the Sealed7 runs a "dual-burn" setup on high beam mode, the output is intensified to nearly 4000 mosquito-melting lumens there. DRL / Switchback: The quad-optic setup has three functions: 1) High-intensity white daytime running light. 2) Low-intensity white daytime running light (with low beams on) and 3) High-intensity amber turn signal. The switchback setup on the turn signal will automatically interrupt the white DRL, flash, and then return to white once the signal stops. The 3-wire DRL/Signal input makes setup easy. Quality: No expense was spared when designing the Sealed7. Start with the ingredients at the heart of the headlight from Nichia-Japan and Philips-Lumileds. These aren't cheap emitters to begin with. The UV coated Polycarbonate lens is shatter proof and will take years of abuse without fading. You can feel the precision in the heavy-duty die-cast housings that double as a heat-sink are not much deeper than the OEM Wrangler headlights. A special PWM LED driver resides inside of the headlight to keep the LED's running at their peak intensity, even during prolonged periods of use.Fitted: The Sealed7 2.0 LED headlights include a set of proprietary mounting brackets designed specially for the Jeep Wrangler JL. Unlike other brands that use a cheap stamped steel bracket kit that looks awful once mounted, these maintain a factory-like flush fitment, and also provide you with the complete ability to adjust the aim vertically and laterally. Minor assembly is required. Plug n Play: And flicker-free! There is no bulky/complicated relay harness to run for the Morimoto Sealed7 LED heads. Just mount the external LED driver behind the housing, plug in the H13 connector to the factory outlet, and you're ready to roll. Tech Specs: TRAFFIC PATTERN:::LHD / DOT|INPUT VOLTAGE:::9-36V DC|RATED LIFETIME:::10,000 Hours|HOUSING MATERIAL:::Powdercoated Cast Aluminum|LENS MATERIAL:::UV-Treated Polycarbonate|INPUT CONNECTOR:::Delphi H13 + T-Taps for DRL|LOW / HIGH LED:::12x Nichia NCSW170C|DRL / TURN LED:::4x Philips Luxeon 3535L|LOW BEAM:::2,860 lumens / 27w|HIGH BEAM:::1,020 lumens / 12w|KELVIN RATING:::5000K (Pure White) What's Included: Assemblies:::2x Morimoto Sealed7 2.0 Bi-LED|Brackets:::JL-Spec Buckets|Wiring:::JL Multipin Anti-Flickers|Warranty:::5 Years Compatible Bases: Jeep Wrangler:::2018+ (All)|Input Wiring:::JL Multi-pin with Anti-Flicker

Morimoto Sealed7 LED Headlight: Jeep Wrangler 2018, 2019, 2020, 2021

Code: LF518
$599.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Installation Guide: Click to download

Just when you think: You've done your research and come across every last option in the 7" round LED market, these should catch your attention. While it's true there's only so many ways you can package a set of low and high beam LED-based optics into a 7" round platform; Morimoto's Sealed7 2.0 pulls it off in the most functional and attractive setup we've seen to date.

Honestly: Here at our shop, we've seen em all and believe that the Sealed7 2.0 is the best new entry in the 7 inch Jeep Headlight market for a variety of reasons, which we'll outline below.

Proprietary: The Morimoto Sealed7 2.0 is all-new, all-original from the ground up. Until now, there were basically three distinct products on the market. You have the real-deal J.W. Speaker, at the top of the totem poll. Then you have the cheap J.W. Speaker knock-offs, re-branded by companies A,B, and C, and then you have the Truck-Lite reflector-based 7" lights...again, re-branded by company X,Y, and Z. These are unlike anything else on the market.

Output: In low beam mode, Nichia NCSW170CSeries LED's paired with Morimoto's advanced Kuria Optic projector lens array efficiently distributes roughly 3000 lumens on the road in a properly LHD-stepped beam pattern. Because the Sealed7 runs a "dual-burn" setup on high beam mode, the output is intensified to nearly 4000 mosquito-melting lumens there.

DRL / Switchback: The quad-optic setup has three functions: 1) High-intensity white daytime running light. 2) Low-intensity white daytime running light (with low beams on) and 3) High-intensity amber turn signal. The switchback setup on the turn signal will automatically interrupt the white DRL, flash, and then return to white once the signal stops. The 3-wire DRL/Signal input makes setup easy.

Quality: No expense was spared when designing the Sealed7. Start with the ingredients at the heart of the headlight from Nichia-Japan and Philips-Lumileds. These aren't cheap emitters to begin with. The UV coated Polycarbonate lens is shatter proof and will take years of abuse without fading. You can feel the precision in the heavy-duty die-cast housings that double as a heat-sink are not much deeper than the OEM Wrangler headlights. A special PWM LED driver resides inside of the headlight to keep the LED's running at their peak intensity, even during prolonged periods of use.

Fitted: The Sealed7 2.0 LED headlights include a set of proprietary mounting brackets designed specially for the Jeep Wrangler JL. Unlike other brands that use a cheap stamped steel bracket kit that looks awful once mounted, these maintain a factory-like flush fitment, and also provide you with the complete ability to adjust the aim vertically and laterally. Minor assembly is required.

Plug n Play: And flicker-free! There is no bulky/complicated relay harness to run for the Morimoto Sealed7 LED heads. Just mount the external LED driver behind the housing, plug in the H13 connector to the factory outlet, and you're ready to roll.

  • Tech Specs: TRAFFIC PATTERN:::LHD / DOT|INPUT VOLTAGE:::9-36V DC|RATED LIFETIME:::10,000 Hours|HOUSING MATERIAL:::Powdercoated Cast Aluminum|LENS MATERIAL:::UV-Treated Polycarbonate|INPUT CONNECTOR:::Delphi H13 + T-Taps for DRL|LOW / HIGH LED:::12x Nichia NCSW170C|DRL / TURN LED:::4x Philips Luxeon 3535L|LOW BEAM:::2,860 lumens / 27w|HIGH BEAM:::1,020 lumens / 12w|KELVIN RATING:::5000K (Pure White)
  • What's Included: Assemblies:::2x Morimoto Sealed7 2.0 Bi-LED|Brackets:::JL-Spec Buckets|Wiring:::JL Multipin Anti-Flickers|Warranty:::5 Years
  • Compatible Bases: Jeep Wrangler:::2018+ (All)|Input Wiring:::JL Multi-pin with Anti-Flicker

Just when you think: You've done your research and come across every last option in the 7" round LED market, these should catch your attention. While it's true there's only so many ways you can package a set of low and high beam LED-based optics into a 7" round platform; Morimoto's Sealed7 2.0 pulls it off in the most functional and attractive setup we've seen to date.

Honestly: Here at our shop, we've seen em all and believe that the Sealed7 2.0 is the best new entry in the 7 inch Jeep Headlight market for a variety of reasons, which we'll outline below.

Proprietary: The Morimoto Sealed7 2.0 is all-new, all-original from the ground up. Until now, there were basically three distinct products on the market. You have the real-deal J.W. Speaker, at the top of the totem poll. Then you have the cheap J.W. Speaker knock-offs, re-branded by companies A,B, and C, and then you have the Truck-Lite reflector-based 7" lights...again, re-branded by company X,Y, and Z. These are unlike anything else on the market.

Output: In low beam mode, Nichia NCSW170CSeries LED's paired with Morimoto's advanced Kuria Optic projector lens array efficiently distributes roughly 3000 lumens on the road in a properly LHD-stepped beam pattern. Because the Sealed7 runs a "dual-burn" setup on high beam mode, the output is intensified to nearly 4000 mosquito-melting lumens there.

DRL / Switchback: The quad-optic setup has three functions: 1) High-intensity white daytime running light. 2) Low-intensity white daytime running light (with low beams on) and 3) High-intensity amber turn signal. The switchback setup on the turn signal will automatically interrupt the white DRL, flash, and then return to white once the signal stops. The 3-wire DRL/Signal input makes setup easy.

Quality: No expense was spared when designing the Sealed7. Start with the ingredients at the heart of the headlight from Nichia-Japan and Philips-Lumileds. These aren't cheap emitters to begin with. The UV coated Polycarbonate lens is shatter proof and will take years of abuse without fading. You can feel the precision in the heavy-duty die-cast housings that double as a heat-sink are not much deeper than the OEM Wrangler headlights. A special PWM LED driver resides inside of the headlight to keep the LED's running at their peak intensity, even during prolonged periods of use.

Fitted: The Sealed7 2.0 LED headlights include a set of proprietary mounting brackets designed specially for the Jeep Wrangler JL. Unlike other brands that use a cheap stamped steel bracket kit that looks awful once mounted, these maintain a factory-like flush fitment, and also provide you with the complete ability to adjust the aim vertically and laterally. Minor assembly is required.

Plug n Play: And flicker-free! There is no bulky/complicated relay harness to run for the Morimoto Sealed7 LED heads. Just mount the external LED driver behind the housing, plug in the H13 connector to the factory outlet, and you're ready to roll.

  • Tech Specs: TRAFFIC PATTERN:::LHD / DOT|INPUT VOLTAGE:::9-36V DC|RATED LIFETIME:::10,000 Hours|HOUSING MATERIAL:::Powdercoated Cast Aluminum|LENS MATERIAL:::UV-Treated Polycarbonate|INPUT CONNECTOR:::Delphi H13 + T-Taps for DRL|LOW / HIGH LED:::12x Nichia NCSW170C|DRL / TURN LED:::4x Philips Luxeon 3535L|LOW BEAM:::2,860 lumens / 27w|HIGH BEAM:::1,020 lumens / 12w|KELVIN RATING:::5000K (Pure White)
  • What's Included: Assemblies:::2x Morimoto Sealed7 2.0 Bi-LED|Brackets:::JL-Spec Buckets|Wiring:::JL Multipin Anti-Flickers|Warranty:::5 Years
  • Compatible Bases: Jeep Wrangler:::2018+ (All)|Input Wiring:::JL Multi-pin with Anti-Flicker

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)