G5 D2S Bi-Xenon Projector Retrofit Parts Package
G5 D2S Bi-Xenon Projector Retrofit Parts Package
Lightwerkz Global Inc
What is it? Essentially this is a replica of the Original Hella G5 Projector, which is what the Morimoto D2S 4.0 Bixenon projector was based off of. While very similar in comparison, there are a few differences. The main difference is the shield type, the G5 has a straight shield and the Morimoto D2S 4.0 has a curved shield. The rear bowls appear to be the same design expect the G5 has a "fin" in the lower portion. The overall size is also extremely similar, if not 100% the same. The G5 projectors are riveted together, while the Morimoto D2S 4.0 had screws. The rivets can be removed and replaced with screws if you require to take apart the unit. Thats about it besides the color of the front of the projector, which is painted black on the Morimoto D2S 4.0. Talk about extreme performance at a better value! Easy-Install: The threaded shaft (G5-R ONLY) makes it super easy to install without cutting up the whole housing. H4 is direct with the supplied mounting plate. These bolt right on many models with the provided hardware - only slight modification required most of the time. These have a bare connector on the end for the bixenon, so keep in mind you will want to solder in the connection.Shrouds: Basically, they're the aesthetics that add the finishing touch to your new headlight retrofit. They cover the projector after it's installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!HID Ballasts: Morimoto HID ballasts are designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.Optional Can-bus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!WHAT'S INCLUDED2x Projectors: G5-R Clear Lens Bi-Xenon LHD2x Ballasts: Morimoto XB35/XB55 D2S or Hylux 25W/45W2x Bulbs: Morimoto XB D2S or Philips / Osram2x Shrouds: User Preference1x Wire Harness: Morimoto HD Relay or Moto Control or Can-BusWarranty: 35w 5 Years / 50w 3 yearsCOMPATIBILITYProjectors: Low and High Beam CapableWire Harness: Match your original bulb size. Don't know it? Look it up here.Vehicles: Universal Fit (may require modification)Compatible With: 35W, 50W AT YOUR OWN RISK
G5 D2S Bi-Xenon Projector Retrofit Parts Package
-
FREE SHIPPING
*EXCLUSIONS APPLY -
FAST
ORDER PROCESSING -
HASSLE-FREE
WARRANTY & RETURNS
What is it? Essentially this is a replica of the Original Hella G5 Projector, which is what the Morimoto D2S 4.0 Bixenon projector was based off of. While very similar in comparison, there are a few differences. The main difference is the shield type, the G5 has a straight shield and the Morimoto D2S 4.0 has a curved shield. The rear bowls appear to be the same design expect the G5 has a "fin" in the lower portion. The overall size is also extremely similar, if not 100% the same. The G5 projectors are riveted together, while the Morimoto D2S 4.0 had screws. The rivets can be removed and replaced with screws if you require to take apart the unit. Thats about it besides the color of the front of the projector, which is painted black on the Morimoto D2S 4.0. Talk about extreme performance at a better value!
Easy-Install: The threaded shaft (G5-R ONLY) makes it super easy to install without cutting up the whole housing. H4 is direct with the supplied mounting plate. These bolt right on many models with the provided hardware - only slight modification required most of the time. These have a bare connector on the end for the bixenon, so keep in mind you will want to solder in the connection.
Shrouds: Basically, they're the aesthetics that add the finishing touch to your new headlight retrofit. They cover the projector after it's installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
HID Ballasts: Morimoto HID ballasts are designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.
Optional Can-bus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!
WHAT'S INCLUDED
2x Projectors: G5-R Clear Lens Bi-Xenon LHD
2x Ballasts: Morimoto XB35/XB55 D2S or Hylux 25W/45W
2x Bulbs: Morimoto XB D2S or Philips / Osram
2x Shrouds: User Preference
1x Wire Harness: Morimoto HD Relay or Moto Control or Can-Bus
Warranty: 35w 5 Years / 50w 3 years
COMPATIBILITY
Projectors: Low and High Beam Capable
Wire Harness: Match your original bulb size. Don't know it? Look it up here.
Vehicles: Universal Fit (may require modification)
Compatible With: 35W, 50W AT YOUR OWN RISK
Easy-Install: The threaded shaft (G5-R ONLY) makes it super easy to install without cutting up the whole housing. H4 is direct with the supplied mounting plate. These bolt right on many models with the provided hardware - only slight modification required most of the time. These have a bare connector on the end for the bixenon, so keep in mind you will want to solder in the connection.
Shrouds: Basically, they're the aesthetics that add the finishing touch to your new headlight retrofit. They cover the projector after it's installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
HID Ballasts: Morimoto HID ballasts are designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.
Optional Can-bus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!
WHAT'S INCLUDED
2x Projectors: G5-R Clear Lens Bi-Xenon LHD
2x Ballasts: Morimoto XB35/XB55 D2S or Hylux 25W/45W
2x Bulbs: Morimoto XB D2S or Philips / Osram
2x Shrouds: User Preference
1x Wire Harness: Morimoto HD Relay or Moto Control or Can-Bus
Warranty: 35w 5 Years / 50w 3 years
COMPATIBILITY
Projectors: Low and High Beam Capable
Wire Harness: Match your original bulb size. Don't know it? Look it up here.
Vehicles: Universal Fit (may require modification)
Compatible With: 35W, 50W AT YOUR OWN RISK
What is it? Essentially this is a replica of the Original Hella G5 Projector, which is what the Morimoto D2S 4.0 Bixenon projector was based off of. While very similar in comparison, there are a few differences. The main difference is the shield type, the G5 has a straight shield and the Morimoto D2S 4.0 has a curved shield. The rear bowls appear to be the same design expect the G5 has a "fin" in the lower portion. The overall size is also extremely similar, if not 100% the same. The G5 projectors are riveted together, while the Morimoto D2S 4.0 had screws. The rivets can be removed and replaced with screws if you require to take apart the unit. Thats about it besides the color of the front of the projector, which is painted black on the Morimoto D2S 4.0. Talk about extreme performance at a better value!
Easy-Install: The threaded shaft (G5-R ONLY) makes it super easy to install without cutting up the whole housing. H4 is direct with the supplied mounting plate. These bolt right on many models with the provided hardware - only slight modification required most of the time. These have a bare connector on the end for the bixenon, so keep in mind you will want to solder in the connection.
Shrouds: Basically, they're the aesthetics that add the finishing touch to your new headlight retrofit. They cover the projector after it's installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
HID Ballasts: Morimoto HID ballasts are designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.
Optional Can-bus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!
WHAT'S INCLUDED
2x Projectors: G5-R Clear Lens Bi-Xenon LHD
2x Ballasts: Morimoto XB35/XB55 D2S or Hylux 25W/45W
2x Bulbs: Morimoto XB D2S or Philips / Osram
2x Shrouds: User Preference
1x Wire Harness: Morimoto HD Relay or Moto Control or Can-Bus
Warranty: 35w 5 Years / 50w 3 years
COMPATIBILITY
Projectors: Low and High Beam Capable
Wire Harness: Match your original bulb size. Don't know it? Look it up here.
Vehicles: Universal Fit (may require modification)
Compatible With: 35W, 50W AT YOUR OWN RISK
Easy-Install: The threaded shaft (G5-R ONLY) makes it super easy to install without cutting up the whole housing. H4 is direct with the supplied mounting plate. These bolt right on many models with the provided hardware - only slight modification required most of the time. These have a bare connector on the end for the bixenon, so keep in mind you will want to solder in the connection.
Shrouds: Basically, they're the aesthetics that add the finishing touch to your new headlight retrofit. They cover the projector after it's installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!
HID Ballasts: Morimoto HID ballasts are designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto's harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle's original in-cabin controls.
Optional Can-bus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto's Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!
WHAT'S INCLUDED
2x Projectors: G5-R Clear Lens Bi-Xenon LHD
2x Ballasts: Morimoto XB35/XB55 D2S or Hylux 25W/45W
2x Bulbs: Morimoto XB D2S or Philips / Osram
2x Shrouds: User Preference
1x Wire Harness: Morimoto HD Relay or Moto Control or Can-Bus
Warranty: 35w 5 Years / 50w 3 years
COMPATIBILITY
Projectors: Low and High Beam Capable
Wire Harness: Match your original bulb size. Don't know it? Look it up here.
Vehicles: Universal Fit (may require modification)
Compatible With: 35W, 50W AT YOUR OWN RISK
What is your shipping cutoff time?
Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product.
Will I receive a tracking number?
Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order.
Is shipping free?
Orders over $99 qualify for free shipping within the contiguous United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option.
Return Window
We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date.
Shipping
Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process.
Refunds/Store Credit
Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount. Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us.
Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines.
Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.
Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit.
Exclusions
If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned.
HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country.
Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE.
