TRIGGER 4 PLUS Wireless Accessory Control System TRIGGER 4 PLUS Wireless Accessory Control System Lightwerkz Global Inc TRIGGER 4 PLUS Wireless Accessory Controller The Trigger 4 Plus Wireless Accessory Controller substantially saves installation time of your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of your vehicle when wiring accessories. Includes an RF remote control for wirelessly activating installed accessories from inside or outside the vehicle. In addition, fused circuits with LED indicators notify you of active circuits or blown fuses.The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. There is an ambient back-light (illuminating the space around the switches momentarily) and it can be re-programmed for security or use with additional remotes; Several Trigger 4 Plus Wireless Accessory Controllers can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to flip a switch on the remote.We get asked this a lot, so…Please do not swap higher capacity fuses into lower capacity circuits. Each circuit is engineered to handle only the stated load, and doing so will damage the Trigger and void its warranty.Extend Control With The Trigger ACS Plus app for iOS and Android Devices!The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. Of course, it’s quick and easy to set up and allows for extended control and user customization. Set switch functionality to either standard rocker or momentary, edit individual accessory names, and monitor vehicle battery voltage when using our VOLT Bluetooth Battery Monitor.Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.Save time, simplify your installs, and get out on the trail: Pull The TRIGGER!A few additional features:Accepts 12-24 Volt inputTwo 10 amp fused circuits w/12-24 Volt outputTwo 30 amp fused circuits w/12-24 Volt outputIncludes 4 wire harnesses with waterproof connectors: two 10 gauge and two 12 gaugeWireless Battery Operated RF remote switch module with ambient backlightYou can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!Comes with switch labels too! Please note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter controller…these are readily available at most brick and mortar and online shops.

TRIGGER 4 PLUS Wireless Accessory Control System

Code: 2100
$293.99
Expected Ship Date:
Order placed today will ship in estimated
Item ships direct from vendor.
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

TRIGGER 4 PLUS Wireless Accessory Controller


The Trigger 4 Plus Wireless Accessory Controller substantially saves installation time of your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of your vehicle when wiring accessories. Includes an RF remote control for wirelessly activating installed accessories from inside or outside the vehicle. In addition, fused circuits with LED indicators notify you of active circuits or blown fuses.

The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. There is an ambient back-light (illuminating the space around the switches momentarily) and it can be re-programmed for security or use with additional remotes; Several Trigger 4 Plus Wireless Accessory Controllers can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to flip a switch on the remote.

We get asked this a lot, so…Please do not swap higher capacity fuses into lower capacity circuits. Each circuit is engineered to handle only the stated load, and doing so will damage the Trigger and void its warranty.

Extend Control With The Trigger ACS Plus app for iOS and Android Devices!
The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. Of course, it’s quick and easy to set up and allows for extended control and user customization. Set switch functionality to either standard rocker or momentary, edit individual accessory names, and monitor vehicle battery voltage when using our VOLT Bluetooth Battery Monitor.

Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.

Save time, simplify your installs, and get out on the trail: Pull The TRIGGER!

A few additional features:

Accepts 12-24 Volt input
Two 10 amp fused circuits w/12-24 Volt output
Two 30 amp fused circuits w/12-24 Volt output
Includes 4 wire harnesses with waterproof connectors: two 10 gauge and two 12 gauge
Wireless Battery Operated RF remote switch module with ambient backlight
You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
Comes with switch labels too!

Please note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter controller…these are readily available at most brick and mortar and online shops.

TRIGGER 4 PLUS Wireless Accessory Controller


The Trigger 4 Plus Wireless Accessory Controller substantially saves installation time of your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of your vehicle when wiring accessories. Includes an RF remote control for wirelessly activating installed accessories from inside or outside the vehicle. In addition, fused circuits with LED indicators notify you of active circuits or blown fuses.

The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. There is an ambient back-light (illuminating the space around the switches momentarily) and it can be re-programmed for security or use with additional remotes; Several Trigger 4 Plus Wireless Accessory Controllers can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to flip a switch on the remote.

We get asked this a lot, so…Please do not swap higher capacity fuses into lower capacity circuits. Each circuit is engineered to handle only the stated load, and doing so will damage the Trigger and void its warranty.

Extend Control With The Trigger ACS Plus app for iOS and Android Devices!
The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. Of course, it’s quick and easy to set up and allows for extended control and user customization. Set switch functionality to either standard rocker or momentary, edit individual accessory names, and monitor vehicle battery voltage when using our VOLT Bluetooth Battery Monitor.

Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.

Save time, simplify your installs, and get out on the trail: Pull The TRIGGER!

A few additional features:

Accepts 12-24 Volt input
Two 10 amp fused circuits w/12-24 Volt output
Two 30 amp fused circuits w/12-24 Volt output
Includes 4 wire harnesses with waterproof connectors: two 10 gauge and two 12 gauge
Wireless Battery Operated RF remote switch module with ambient backlight
You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
Comes with switch labels too!

Please note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter controller…these are readily available at most brick and mortar and online shops.

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)