Supercharged Drivers: LF2-506 Series (Set) Supercharged Drivers: LF2-506 Series (Set) Morimoto More Power: The XB Evo and XB Evo Hybrid headlights are designed for enthusiasts who are serious about technology, styling, reliability, and performance--and while they have no problem checking all those boxes right out of their boxes: if you need even more output... here is your answer.On Road: The Morimoto XB Evo and XB Evo Hybrid Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.Off Road: Yes, you read that correctly. Out of the box, the XB Evos are only producing a fraction of their potential intensity for compliance reasons. So, you want even more light for your off-road adventures? These Supercharged LED drivers bolt on and boost both the low and high beam intensity by 30-50%, all without sacrificing reliability or warranty.Non-Compliant: While the Supercharged drivers easily enable the XB Evo and XB Evo Hybrid to outshine the competition no matter the model, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads. Once installed, it is NOT possible to reduce intensity back to compliant levels without re-installing the standard DOT-Spec drivers.Welcome Sequence: When installed on the Hybrid version of the XB Evo Headlights, these will also add the awesome welcome sequence to the projectors and DRL optics that isn't normally active on that version of the headlights. Even though this does nothing for light output, it definitely looks cool, and there's nothing wrong with that!Trouble-Free: Three color-coded indicator lights* on the back of the LED drivers not only help to assure you that everything is working properly, but if in the rare case that something isn't, also help you identify problems with minimal troubleshooting and/or disassembly. *The Red LED confirms power to the DRL, the green LED confirms power to the low beam circuit, and the blue LED to the high beam circuit.Bolt-On: Designed as a direct replacement for the standard LED drivers, these are an easy swap on the back of the housings during headlight installation. Again, because the standard drivers are under-powering the LED projectors for DOT compliance reasons, these Supercharged drivers will not cause any reliability issues since the boosted power is still within range of what the LEDs can safely handle. These optional Supercharged drivers are compatible with both XB Evo and XB Evo Hybrid headlights.Tech Specs: Power Rating: 1,500mA Output Boost: 30-50 Percent Increase Status Indicators: Red - Switched ignition power/fuse tap. Green - Low Beam power. Blue - High Beam power. Input: XB Evo / XB Evo Hybrid multi-pin connector What's Included: LED Drivers: 2x (One Pair) Supercharged LED Drivers Accessories: 8x Screws, 1x Packet Grease Warranty: Five (5) Years Compatibility: Morimoto Headlights: LF2-506 and LF2-506Y Only Compliance: Installation results in non-compliant intensity. Not for on-road use in USA.

Supercharged Drivers: LF2-506 Series (Set)

Code: LF2-DRVSC12
$210.00
In Stock
Item ships direct from vendor.
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

More Power: The XB Evo and XB Evo Hybrid headlights are designed for enthusiasts who are serious about technology, styling, reliability, and performance--and while they have no problem checking all those boxes right out of their boxes: if you need even more output... here is your answer.On Road: The Morimoto XB Evo and XB Evo Hybrid Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.Off Road: Yes, you read that correctly. Out of the box, the XB Evos are only producing a fraction of their potential intensity for compliance reasons. So, you want even more light for your off-road adventures? These Supercharged LED drivers bolt on and boost both the low and high beam intensity by 30-50%, all without sacrificing reliability or warranty.Non-Compliant: While the Supercharged drivers easily enable the XB Evo and XB Evo Hybrid to outshine the competition no matter the model, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads. Once installed, it is NOT possible to reduce intensity back to compliant levels without re-installing the standard DOT-Spec drivers.Welcome Sequence: When installed on the Hybrid version of the XB Evo Headlights, these will also add the awesome welcome sequence to the projectors and DRL optics that isn't normally active on that version of the headlights. Even though this does nothing for light output, it definitely looks cool, and there's nothing wrong with that!Trouble-Free: Three color-coded indicator lights* on the back of the LED drivers not only help to assure you that everything is working properly, but if in the rare case that something isn't, also help you identify problems with minimal troubleshooting and/or disassembly. *The Red LED confirms power to the DRL, the green LED confirms power to the low beam circuit, and the blue LED to the high beam circuit.Bolt-On: Designed as a direct replacement for the standard LED drivers, these are an easy swap on the back of the housings during headlight installation. Again, because the standard drivers are under-powering the LED projectors for DOT compliance reasons, these Supercharged drivers will not cause any reliability issues since the boosted power is still within range of what the LEDs can safely handle. These optional Supercharged drivers are compatible with both XB Evo and XB Evo Hybrid headlights.

Tech Specs:

  • Power Rating: 1,500mA
  • Output Boost: 30-50 Percent Increase
  • Status Indicators: Red - Switched ignition power/fuse tap. Green - Low Beam power. Blue - High Beam power.
  • Input: XB Evo / XB Evo Hybrid multi-pin connector

What's Included:

  • LED Drivers: 2x (One Pair) Supercharged LED Drivers
  • Accessories: 8x Screws, 1x Packet Grease
  • Warranty: Five (5) Years

Compatibility:

  • Morimoto Headlights: LF2-506 and LF2-506Y Only
  • Compliance: Installation results in non-compliant intensity. Not for on-road use in USA.

More Power: The XB Evo and XB Evo Hybrid headlights are designed for enthusiasts who are serious about technology, styling, reliability, and performance--and while they have no problem checking all those boxes right out of their boxes: if you need even more output... here is your answer.On Road: The Morimoto XB Evo and XB Evo Hybrid Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.Off Road: Yes, you read that correctly. Out of the box, the XB Evos are only producing a fraction of their potential intensity for compliance reasons. So, you want even more light for your off-road adventures? These Supercharged LED drivers bolt on and boost both the low and high beam intensity by 30-50%, all without sacrificing reliability or warranty.Non-Compliant: While the Supercharged drivers easily enable the XB Evo and XB Evo Hybrid to outshine the competition no matter the model, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads. Once installed, it is NOT possible to reduce intensity back to compliant levels without re-installing the standard DOT-Spec drivers.Welcome Sequence: When installed on the Hybrid version of the XB Evo Headlights, these will also add the awesome welcome sequence to the projectors and DRL optics that isn't normally active on that version of the headlights. Even though this does nothing for light output, it definitely looks cool, and there's nothing wrong with that!Trouble-Free: Three color-coded indicator lights* on the back of the LED drivers not only help to assure you that everything is working properly, but if in the rare case that something isn't, also help you identify problems with minimal troubleshooting and/or disassembly. *The Red LED confirms power to the DRL, the green LED confirms power to the low beam circuit, and the blue LED to the high beam circuit.Bolt-On: Designed as a direct replacement for the standard LED drivers, these are an easy swap on the back of the housings during headlight installation. Again, because the standard drivers are under-powering the LED projectors for DOT compliance reasons, these Supercharged drivers will not cause any reliability issues since the boosted power is still within range of what the LEDs can safely handle. These optional Supercharged drivers are compatible with both XB Evo and XB Evo Hybrid headlights.

Tech Specs:

  • Power Rating: 1,500mA
  • Output Boost: 30-50 Percent Increase
  • Status Indicators: Red - Switched ignition power/fuse tap. Green - Low Beam power. Blue - High Beam power.
  • Input: XB Evo / XB Evo Hybrid multi-pin connector

What's Included:

  • LED Drivers: 2x (One Pair) Supercharged LED Drivers
  • Accessories: 8x Screws, 1x Packet Grease
  • Warranty: Five (5) Years

Compatibility:

  • Morimoto Headlights: LF2-506 and LF2-506Y Only
  • Compliance: Installation results in non-compliant intensity. Not for on-road use in USA.

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)