Morimoto 4Banger Ditch Light Kit: 21+ F150 (HXB Yellow Combo Beam) Morimoto 4Banger Ditch Light Kit: 21+ F150 (HXB Yellow Combo Beam) Morimoto Bolt on Brighter: The Morimoto 4Banger A-Pillar LED system is the perfect solution for more light, aimed exactly where you want it. From long-range spot-lights for high speed driving to ditch lights to illuminate the side of the road, our A-Pillar kit is all about versatility. Select a set of high performance 4Banger LED pods in your choice of beam pattern, pair that with the brackets to make installation a breeze, and power it properly with our switched wire harness. Engineered Fitment: Morimoto's A-Pillar kit for the 2021+ Ford F-150 has been through numerous rounds of design, prototyping and testing directly on the truck to ensure perfect compatibility. Everything lines up with pre-existing mounting points to create an installation that is truly modification-free. Guaranteed. Yes, we agree this is a basic requirement, but you wouldn't believe the poor fitment we encountered from other well-known brands during development. It was mind blowing. Branches Beware: Each bracket is laser cut from 304 stainless steel, then powder coated. Put simply, the side mirrors on your F-150 will rip off way before our A-Pillar kit even flexes a muscle. Wiring & Cable Management: No sloppy wiring allowed. We have incorporated several mounting locations and cable routing clips on the stem of the bracket to direct the input wiring from your LED pods down into the engine bay. From there, you can plug n play with Morimotos switched relay wire harness for a clean and reliable install. Compatibility: Though they pair perfectly with the 4Banger LED pods, our superior A-Pillar brackets are compatible with LED pods from most other brands including Baja Designs, KC Hi-Lites, Rigid Industries, and Diode Dynamics.Tech Specs: Peak Intensity (cd): 54,600 Cd (Post Warm-Up) (546 lux @ 10m) Input: Proprietary Overmolded Deutsch DT 2-Pin w/ Pigtail Input Voltage: 9-18V DC Power (Stabilized): 42w Current: 3.2A @ 13.2V DC Peak Luminosity (lm)(raw): 3,000lm Color: 2700K Light Source: 3x Osram HX Boost (5700K) Material: Makrolon LED PC (Lens), Powdercoated Die Cast Aluminum (Housing) IP Rating: IP69K (Dust / High Pressure Water Resistant) What's Included: Ditch Light Brackets: 2x (One Pair) Morimoto Brackets (BAF067 / Ford F-150) Hardware: Stainless bolts & plastic cable clips LED Pods: 2x (One Pair) Morimoto 4Banger Wiring: 1x Morimoto Switched Relay Harness Warranty: Limited Lifetime Compatibility:Vehicles: Ford F-150 (21+)

Morimoto 4Banger Ditch Light Kit: 21+ F150 (HXB Yellow Combo Beam)

Code: 4B-PLR-KIT-1300
$697.50
In Stock
Item ships direct from vendor.
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Bolt on Brighter: The Morimoto 4Banger A-Pillar LED system is the perfect solution for more light, aimed exactly where you want it. From long-range spot-lights for high speed driving to ditch lights to illuminate the side of the road, our A-Pillar kit is all about versatility. Select a set of high performance 4Banger LED pods in your choice of beam pattern, pair that with the brackets to make installation a breeze, and power it properly with our switched wire harness. Engineered Fitment: Morimoto's A-Pillar kit for the 2021+ Ford F-150 has been through numerous rounds of design, prototyping and testing directly on the truck to ensure perfect compatibility. Everything lines up with pre-existing mounting points to create an installation that is truly modification-free. Guaranteed. Yes, we agree this is a basic requirement, but you wouldn't believe the poor fitment we encountered from other well-known brands during development. It was mind blowing. Branches Beware: Each bracket is laser cut from 304 stainless steel, then powder coated. Put simply, the side mirrors on your F-150 will rip off way before our A-Pillar kit even flexes a muscle. Wiring & Cable Management: No sloppy wiring allowed. We have incorporated several mounting locations and cable routing clips on the stem of the bracket to direct the input wiring from your LED pods down into the engine bay. From there, you can plug n play with Morimotos switched relay wire harness for a clean and reliable install. Compatibility: Though they pair perfectly with the 4Banger LED pods, our superior A-Pillar brackets are compatible with LED pods from most other brands including Baja Designs, KC Hi-Lites, Rigid Industries, and Diode Dynamics.

Tech Specs:

  • Peak Intensity (cd): 54,600 Cd (Post Warm-Up) (546 lux @ 10m)
  • Input: Proprietary Overmolded Deutsch DT 2-Pin w/ Pigtail
  • Input Voltage: 9-18V DC
  • Power (Stabilized): 42w
  • Current: 3.2A @ 13.2V DC
  • Peak Luminosity (lm)(raw): 3,000lm
  • Color: 2700K
  • Light Source: 3x Osram HX Boost (5700K)
  • Material: Makrolon LED PC (Lens), Powdercoated Die Cast Aluminum (Housing)
  • IP Rating: IP69K (Dust / High Pressure Water Resistant)

What's Included:

  • Ditch Light Brackets: 2x (One Pair) Morimoto Brackets (BAF067 / Ford F-150)
  • Hardware: Stainless bolts & plastic cable clips
  • LED Pods: 2x (One Pair) Morimoto 4Banger
  • Wiring: 1x Morimoto Switched Relay Harness
  • Warranty: Limited Lifetime

Compatibility:

  • Vehicles: Ford F-150 (21+)

Bolt on Brighter: The Morimoto 4Banger A-Pillar LED system is the perfect solution for more light, aimed exactly where you want it. From long-range spot-lights for high speed driving to ditch lights to illuminate the side of the road, our A-Pillar kit is all about versatility. Select a set of high performance 4Banger LED pods in your choice of beam pattern, pair that with the brackets to make installation a breeze, and power it properly with our switched wire harness. Engineered Fitment: Morimoto's A-Pillar kit for the 2021+ Ford F-150 has been through numerous rounds of design, prototyping and testing directly on the truck to ensure perfect compatibility. Everything lines up with pre-existing mounting points to create an installation that is truly modification-free. Guaranteed. Yes, we agree this is a basic requirement, but you wouldn't believe the poor fitment we encountered from other well-known brands during development. It was mind blowing. Branches Beware: Each bracket is laser cut from 304 stainless steel, then powder coated. Put simply, the side mirrors on your F-150 will rip off way before our A-Pillar kit even flexes a muscle. Wiring & Cable Management: No sloppy wiring allowed. We have incorporated several mounting locations and cable routing clips on the stem of the bracket to direct the input wiring from your LED pods down into the engine bay. From there, you can plug n play with Morimotos switched relay wire harness for a clean and reliable install. Compatibility: Though they pair perfectly with the 4Banger LED pods, our superior A-Pillar brackets are compatible with LED pods from most other brands including Baja Designs, KC Hi-Lites, Rigid Industries, and Diode Dynamics.

Tech Specs:

  • Peak Intensity (cd): 54,600 Cd (Post Warm-Up) (546 lux @ 10m)
  • Input: Proprietary Overmolded Deutsch DT 2-Pin w/ Pigtail
  • Input Voltage: 9-18V DC
  • Power (Stabilized): 42w
  • Current: 3.2A @ 13.2V DC
  • Peak Luminosity (lm)(raw): 3,000lm
  • Color: 2700K
  • Light Source: 3x Osram HX Boost (5700K)
  • Material: Makrolon LED PC (Lens), Powdercoated Die Cast Aluminum (Housing)
  • IP Rating: IP69K (Dust / High Pressure Water Resistant)

What's Included:

  • Ditch Light Brackets: 2x (One Pair) Morimoto Brackets (BAF067 / Ford F-150)
  • Hardware: Stainless bolts & plastic cable clips
  • LED Pods: 2x (One Pair) Morimoto 4Banger
  • Wiring: 1x Morimoto Switched Relay Harness
  • Warranty: Limited Lifetime

Compatibility:

  • Vehicles: Ford F-150 (21+)

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)