Panamera LED DRL 2.0 (Black Series) Panamera LED DRL 2.0 (Black Series) Morimoto Panamera-LED: The original Panamera switchback shrouds were an instant success. Inspired by modern Porsche headlights, the 2.0 keeps the model current with the latest design language from Porsche - making them even edgier than before. While the aesthetic is different, the performance is unchanged. But make no mistake, with their Morimoto XSB powered Type II switchback drivers & LEDs, they illuminate the 4 corners with mad intensity. Undoubtedly the most baller status shrouds we've ever offered. With excellent coverage for most projectors too, they're also very functional. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto Panamera LED's use an XSB Switchback driver and high quality LED PCB in place of the cheap crap found in the generics. Their shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy. Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it! WHAT'S INCLUDED Shrouds: 2x Panamera Switchback LED 2.0 LED System: Integrated White/Amber LEDs LED Drivers: Morimoto XSB Switchback Centric Rings: Optional Warranty: 5 Years TECHNICAL Diameter: 134mm Depth: 64mm Front Halo Size: 80mm Finish: Forever Finish Chrome COMPATIBILITY Morimoto Projectors: All except Matchbox and FX-R OEM Projectors: Most except TL, LS430, LS460, Q45 Lens Diameters: 2.5" and 3" Compatible Mounts With: Centric Rings and/or JB Quik Weld Permanent Parking Light Circuits: NEEDS XCHANGE DRIVER OPTION TO WORK PROPERLY AS A TYPE II SWITCHBACK

Panamera LED DRL 2.0 (Black Series)

Code: S265
$66.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Panamera-LED: The original Panamera switchback shrouds were an instant success. Inspired by modern Porsche headlights, the 2.0 keeps the model current with the latest design language from Porsche - making them even edgier than before. While the aesthetic is different, the performance is unchanged. But make no mistake, with their Morimoto XSB powered Type II switchback drivers & LEDs, they illuminate the 4 corners with mad intensity. Undoubtedly the most baller status shrouds we've ever offered. With excellent coverage for most projectors too, they're also very functional.

In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto Panamera LED's use an XSB Switchback driver and high quality LED PCB in place of the cheap crap found in the generics. Their shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below.

Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED
Shrouds: 2x Panamera Switchback LED 2.0
LED System: Integrated White/Amber LEDs
LED Drivers: Morimoto XSB Switchback
Centric Rings: Optional
Warranty: 5 Years

TECHNICAL
Diameter: 134mm
Depth: 64mm
Front Halo Size: 80mm
Finish: Forever Finish Chrome
COMPATIBILITY
Morimoto Projectors: All except Matchbox and FX-R
OEM Projectors: Most except TL, LS430, LS460, Q45
Lens Diameters: 2.5" and 3" Compatible
Mounts With: Centric Rings and/or JB Quik Weld
Permanent Parking Light Circuits: NEEDS XCHANGE DRIVER OPTION TO WORK PROPERLY AS A TYPE II SWITCHBACK

Panamera-LED: The original Panamera switchback shrouds were an instant success. Inspired by modern Porsche headlights, the 2.0 keeps the model current with the latest design language from Porsche - making them even edgier than before. While the aesthetic is different, the performance is unchanged. But make no mistake, with their Morimoto XSB powered Type II switchback drivers & LEDs, they illuminate the 4 corners with mad intensity. Undoubtedly the most baller status shrouds we've ever offered. With excellent coverage for most projectors too, they're also very functional.

In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto Panamera LED's use an XSB Switchback driver and high quality LED PCB in place of the cheap crap found in the generics. Their shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.

Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.

LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below.

Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!

WHAT'S INCLUDED Shrouds: 2x Panamera Switchback LED 2.0 LED System: Integrated White/Amber LEDs LED Drivers: Morimoto XSB Switchback Centric Rings: Optional Warranty: 5 Years
TECHNICAL
Diameter: 134mm Depth: 64mm Front Halo Size: 80mm Finish: Forever Finish Chrome COMPATIBILITY Morimoto Projectors: All except Matchbox and FX-R OEM Projectors: Most except TL, LS430, LS460, Q45 Lens Diameters: 2.5" and 3" Compatible Mounts With: Centric Rings and/or JB Quik Weld Permanent Parking Light Circuits: NEEDS XCHANGE DRIVER OPTION TO WORK PROPERLY AS A TYPE II SWITCHBACK

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jose R.
Love the look!

It's about time someone posted a review here for one of these parts, so here I go. I have a 2010 Honda Fit, which has huge headlights, which means that any shroud will fit. I loved the look of these, especially with the black accents, which go perfect with the blackhousing I did in my stock headlights as you can see from the picture. Wiring is straightforward: just tap the orange wire into your turn signal/parking light. black you tap to a black ground wire, and white to the positive headlight wire. In my case, I tapped into the low beam positive wire. It's actually a lot easier than my description makes it out to be. Then just find a place to put the drivers under your hood and make the connection to the shrouds coming out of your headlights. It's only one wire from the shrouds to the drivers. Piece of cake!

Now, I'm gonna take away 1 star because of this little hiccup. Since the inner ring of LEDs is transparent plastic and I used the Mini D2S 5.0 projectors in my retrofit, you will have to cover the gap between the projector bowl and the lens holder with aluminium tape because the light from the D2S bulbs light up the transparent plastic without the headlights being switched on. I mention this because when the switchback function goes from white to amber, the light that bleeds from the projectors will kinda drown out the amber light from the shrouds. When I first saw this, I thought that the switchback function wasn't working properly and that the LEDs were activating without the drivers being connected. Once I manage to cover that gap with the tape, it should solve my problem and no more drowning out my amber LEDs.

I've included a short video and a picture to show these guys in action. Check them out!

But the great thing is the compatibility of these Morimoto shrouds with their projectors. They just snap right in and stay in place. You could use some JB weld to secure the shrouds a little more securely, but I don't find it necessary. Now, these are big shrouds, so if you don't have large headlights, stay away from these, as you'll have to do a lot of trimming to get them to fit well inside your headlights. But overall, I'm extremely happy with these shrouds complementing my retrofit and I regret not buying these sooner, as the install really was a snap when using proper wire taps. Enjoy!