16-18 Camaro Heads and Smoked Facelift Tails 16-18 Camaro Heads and Smoked Facelift Tails Morimoto Headlights: No Substitutes: Yeah the HID headlights that came on the Camaros perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the Camaro Community needs, because when it comes to headlights: there is nowhere else to upgrade from here. Performance: We've always been blown away by the fact that even though the Camaro came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's Camaro headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters. Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your Camaro without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Camaro's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.Tail Lights: Stock Sucks: Well, maybe not always! Looking to set your 16-18 Camaro apart with the new Camaro's looks? Morimoto's new XB LED Facelift Tails give you just that, and are guranteed for a decade! Compatible: With with all 2016-18 Camaros, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. Plug n Play: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! Style: Inspired by the newest Camaro tails, they don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED Facelift tails for your Camaro are available with the lightly smoked clear lenses or red lenses. Either way, they illuminate red. Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. Tech Specs Headlights: Intensity: 2,600lm (Raw; each) Traffic Pattern: LHD Only Input: GM Multi-Pin OEM Functions: DRL (White), Parking, Low, High Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) Optic: Kuria Optic BI-LED UV Coating: Momentive UVHC3000 Tail Lights: Input: GM Multi-Pin OEM Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens) Light Source: Red SSC LED What's Included Headlights: XB LED Headlights: Chevrolet Camaro (16-18 / Set) Tail Lights: XB LED Tail Lights: Chevrolet Camaro (16-18 / Smoked Lens Facelift / Set) General Compatibility Notes Chevrolet Camaro: 2016-2018 Replaces GM Part #: 84078850, 84078851 NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

16-18 Camaro Heads and Smoked Facelift Tails

Code: HEADTAILKIT175
Sale
$2,550.00 $2,125.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Installation Guide: Click to download

Headlights: No Substitutes: Yeah the HID headlights that came on the Camaros perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the Camaro Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

Performance: We've always been blown away by the fact that even though the Camaro came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's Camaro headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup.

DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters.

Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your Camaro without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Camaro's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.Tail Lights: Stock Sucks: Well, maybe not always! Looking to set your 16-18 Camaro apart with the new Camaro's looks? Morimoto's new XB LED Facelift Tails give you just that, and are guranteed for a decade! Compatible: With with all 2016-18 Camaros, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. Plug n Play: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! Style: Inspired by the newest Camaro tails, they don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED Facelift tails for your Camaro are available with the lightly smoked clear lenses or red lenses. Either way, they illuminate red. Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.

Tech Specs

  • Headlights: Intensity: 2,600lm (Raw; each)
  • Traffic Pattern: LHD Only
  • Input: GM Multi-Pin OEM
  • Functions: DRL (White), Parking, Low, High
  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
  • Optic: Kuria Optic BI-LED
  • UV Coating: Momentive UVHC3000
  • Tail Lights: Input: GM Multi-Pin OEM
  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
  • Light Source: Red SSC LED

What's Included

  • Headlights: XB LED Headlights: Chevrolet Camaro (16-18 / Set)
  • Tail Lights: XB LED Tail Lights: Chevrolet Camaro (16-18 / Smoked Lens Facelift / Set)

General Compatibility Notes

  • Chevrolet Camaro: 2016-2018
  • Replaces GM Part #: 84078850, 84078851
  • NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

Headlights: No Substitutes: Yeah the HID headlights that came on the Camaros perform well enough, but as the saying go: stock sucks! Upgrade your setup to a full LED setup with Morimoto! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the Camaro Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

Performance: We've always been blown away by the fact that even though the Camaro came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's Camaro headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup.

DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters.

Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your Camaro without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Camaro's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.Tail Lights: Stock Sucks: Well, maybe not always! Looking to set your 16-18 Camaro apart with the new Camaro's looks? Morimoto's new XB LED Facelift Tails give you just that, and are guranteed for a decade! Compatible: With with all 2016-18 Camaros, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install. Plug n Play: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! Style: Inspired by the newest Camaro tails, they don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED Facelift tails for your Camaro are available with the lightly smoked clear lenses or red lenses. Either way, they illuminate red. Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.

Tech Specs

  • Headlights: Intensity: 2,600lm (Raw; each)
  • Traffic Pattern: LHD Only
  • Input: GM Multi-Pin OEM
  • Functions: DRL (White), Parking, Low, High
  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
  • Optic: Kuria Optic BI-LED
  • UV Coating: Momentive UVHC3000
  • Tail Lights: Input: GM Multi-Pin OEM
  • Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
  • Light Source: Red SSC LED

What's Included

  • Headlights: XB LED Headlights: Chevrolet Camaro (16-18 / Set)
  • Tail Lights: XB LED Tail Lights: Chevrolet Camaro (16-18 / Smoked Lens Facelift / Set)

General Compatibility Notes

  • Chevrolet Camaro: 2016-2018
  • Replaces GM Part #: 84078850, 84078851
  • NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)