05-13 Corvette C6 Gen 1 Heads and Red Tails 05-13 Corvette C6 Gen 1 Heads and Red Tails Morimoto Headlights: No Substitutes: Yeah the projector headlights that came on the C6 Vette's were modern back in 2005, but by today's standards - their light output is dated and it's hard to argue the modern appeal of the C7's full LED setup! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C6 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here. Performance: We've always been blown away by the fact that even though the C6 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2005-2013 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform even the C7's more modern setup. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters. Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your C6 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. All in all, styling that closely resembles the C7 headlights - making these the best way to facelift your C6.Tail Lights: Corvette: There is something to be said about a Corvette with four oval tail lights. A timeless look that makes the C7 and C8 owners jealous... but, while they got the shape just right, the OEM tail lights on the C6 are still based on incandescent bulbs from the 80s and have become prone to cracking due to age. It's time to do something about that. As long as the rear-end of your Vette is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right? Compatible: these are a direct bolt-on fitment for all C6 Chevrolet Corvettes from 2005-2013 including the coupe and convertible. They use all of the stock mounting points, and should not take more than an hour to install all four tail lights and wire them up. Plug n Play: The Corvette C6 Gen II tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all 2005.5-2013* US-spec cars, and do not need any extra resistors, modules, or adapters for a completely plug n play, error-free install. *See compatibility notes for early 2005 cars. Style: Certainly more modern than the factory units, but without being over the top. The red lens model looks especially natural on the car and could truly pass for original-equipment, while the fully smoked version offers a more aggressive and even more modern look. Functions: The optical light pipe that highlights the outside perimeter of each light acts as a low intensity parking light, a high intensity brake light (red) as well as the turn signal. Surrounding the rear reflex reflector, the center of each light is a high-intensity reverse light (white), which is also plug n play with your factory reverse light circuit. The integrated reverse lights provide a massive boost in rearward visibility over the stock setup too! Well-Built: The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. All wiring and connections are OE grade. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM quality and should easily last the life of your beloved Corvette. Tech SpecsHeadlights: Intensity: 2,600lm (Raw; each)Traffic Pattern: LHD OnlyInput: GM Multi-Pin OEMFunctions: DRL (White), Turn, Parking, Low, HighMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)Optic: Kuria Optic BI-LEDUV Coating: Momentive UVHC3000Tail Lights: Input: GM Multi-Pin OEMMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)Light Source: SSC LED What's IncludedHeadlights: XB LED Headlights: Corvette C6 (05-13 / Gen I / Set)Tail Lights: XB LED Tail Lights: Corvette C6 (05-13 / Red Lens / Set) CompatibilityChevrolet Corvette C6: 2005-2013**Note: Canadian vehicles may need the DRL disabled to avoid flickering.Replaces GM Part #: 20936417, 20936419, 25785289, 20789691, 20789687, 20789711NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.
Morimoto

05-13 Corvette C6 Gen 1 Heads and Red Tails

Code: HEADTAILKIT177
Add Your Review
05-13 Corvette C6 Gen 1 Heads and Red Tails 05-13 Corvette C6 Gen 1 Heads and Red Tails 05-13 Corvette C6 Gen 1 Heads and Red Tails
05-13 Corvette C6 Gen 1 Heads and Red Tails
05-13 Corvette C6 Gen 1 Heads and Red Tails 05-13 Corvette C6 Gen 1 Heads and Red Tails 05-13 Corvette C6 Gen 1 Heads and Red Tails
$2,358.00
In Stock
Item ships direct from vendor.
Add to Wishlist Add to Compare

  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Installation Guide: Click to download



Headlights:

No Substitutes: Yeah the projector headlights that came on the C6 Vette's were modern back in 2005, but by today's standards - their light output is dated and it's hard to argue the modern appeal of the C7's full LED setup!

Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C6 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

Performance: We've always been blown away by the fact that even though the C6 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2005-2013 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform even the C7's more modern setup.

DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters.

Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your C6 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. All in all, styling that closely resembles the C7 headlights - making these the best way to facelift your C6.

Tail Lights:

Corvette: There is something to be said about a Corvette with four oval tail lights. A timeless look that makes the C7 and C8 owners jealous... but, while they got the shape just right, the OEM tail lights on the C6 are still based on incandescent bulbs from the 80s and have become prone to cracking due to age. It's time to do something about that. As long as the rear-end of your Vette is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right?

Compatible: these are a direct bolt-on fitment for all C6 Chevrolet Corvettes from 2005-2013 including the coupe and convertible. They use all of the stock mounting points, and should not take more than an hour to install all four tail lights and wire them up.

Plug n Play: The Corvette C6 Gen II tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all 2005.5-2013* US-spec cars, and do not need any extra resistors, modules, or adapters for a completely plug n play, error-free install. *See compatibility notes for early 2005 cars.

Style: Certainly more modern than the factory units, but without being over the top. The red lens model looks especially natural on the car and could truly pass for original-equipment, while the fully smoked version offers a more aggressive and even more modern look.

Functions: The optical light pipe that highlights the outside perimeter of each light acts as a low intensity parking light, a high intensity brake light (red) as well as the turn signal. Surrounding the rear reflex reflector, the center of each light is a high-intensity reverse light (white), which is also plug n play with your factory reverse light circuit. The integrated reverse lights provide a massive boost in rearward visibility over the stock setup too!

Well-Built: The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. All wiring and connections are OE grade. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM quality and should easily last the life of your beloved Corvette.

Tech Specs
Headlights: Intensity: 2,600lm (Raw; each)
Traffic Pattern: LHD Only
Input: GM Multi-Pin OEM
Functions: DRL (White), Turn, Parking, Low, High
Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Optic: Kuria Optic BI-LED
UV Coating: Momentive UVHC3000
Tail Lights: Input: GM Multi-Pin OEM
Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Light Source: SSC LED

What's Included
Headlights: XB LED Headlights: Corvette C6 (05-13 / Gen I / Set)
Tail Lights: XB LED Tail Lights: Corvette C6 (05-13 / Red Lens / Set)

Compatibility
Chevrolet Corvette C6: 2005-2013*
*Note: Canadian vehicles may need the DRL disabled to avoid flickering.
Replaces GM Part #: 20936417, 20936419, 25785289, 20789691, 20789687, 20789711
NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.



Headlights:

No Substitutes: Yeah the projector headlights that came on the C6 Vette's were modern back in 2005, but by today's standards - their light output is dated and it's hard to argue the modern appeal of the C7's full LED setup!

Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. They are the first and last aftermarket option that the C6 Corvette Community needs, because when it comes to headlights: there is nowhere else to upgrade from here.

Performance: We've always been blown away by the fact that even though the C6 came from the factory with OEM HID headlights, the performance was sub-par. The low quality optics inside the lights were not only poorly designed to begin with, but often lose 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2005-2013 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform even the C7's more modern setup.

DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters.

Plug-n-Play: Wiring is easy too! This LED projector headlight kit is designed to work on your C6 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. All in all, styling that closely resembles the C7 headlights - making these the best way to facelift your C6.

Tail Lights:

Corvette: There is something to be said about a Corvette with four oval tail lights. A timeless look that makes the C7 and C8 owners jealous... but, while they got the shape just right, the OEM tail lights on the C6 are still based on incandescent bulbs from the 80s and have become prone to cracking due to age. It's time to do something about that. As long as the rear-end of your Vette is the only thing that everybody sees as you fly by, it might as well look good as good as it sounds, right?

Compatible: these are a direct bolt-on fitment for all C6 Chevrolet Corvettes from 2005-2013 including the coupe and convertible. They use all of the stock mounting points, and should not take more than an hour to install all four tail lights and wire them up.

Plug n Play: The Corvette C6 Gen II tail lights from Morimoto are designed to work without any modifications. These LED tail lights will plug into the factory connectors for the stock lights on all 2005.5-2013* US-spec cars, and do not need any extra resistors, modules, or adapters for a completely plug n play, error-free install. *See compatibility notes for early 2005 cars.

Style: Certainly more modern than the factory units, but without being over the top. The red lens model looks especially natural on the car and could truly pass for original-equipment, while the fully smoked version offers a more aggressive and even more modern look.

Functions: The optical light pipe that highlights the outside perimeter of each light acts as a low intensity parking light, a high intensity brake light (red) as well as the turn signal. Surrounding the rear reflex reflector, the center of each light is a high-intensity reverse light (white), which is also plug n play with your factory reverse light circuit. The integrated reverse lights provide a massive boost in rearward visibility over the stock setup too!

Well-Built: The durable polycarbonate lens has been UV treated, and will resist the test of time, keeping the housings looking new for many years to come. All wiring and connections are OE grade. The price is justified, and as the saying goes: you pay for what you get. These tail lights are built to exceed OEM quality and should easily last the life of your beloved Corvette.

Tech Specs
Headlights: Intensity: 2,600lm (Raw; each)
Traffic Pattern: LHD Only
Input: GM Multi-Pin OEM
Functions: DRL (White), Turn, Parking, Low, High
Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Optic: Kuria Optic BI-LED
UV Coating: Momentive UVHC3000
Tail Lights: Input: GM Multi-Pin OEM
Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Light Source: SSC LED

What's Included
Headlights: XB LED Headlights: Corvette C6 (05-13 / Gen I / Set)
Tail Lights: XB LED Tail Lights: Corvette C6 (05-13 / Red Lens / Set)

Compatibility
Chevrolet Corvette C6: 2005-2013*
*Note: Canadian vehicles may need the DRL disabled to avoid flickering.
Replaces GM Part #: 20936417, 20936419, 25785289, 20789691, 20789687, 20789711
NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.

What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        
Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE. 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)