{"title":"Toyota","description":"","products":[{"product_id":"h1-morimoto-elite-hid-system","title":"H1: Morimoto Elite HID System","description":"\u003cp\u003e\u003cstrong\u003eRenowned:\u003c\/strong\u003e The \u003ca href=\"http:\/\/www.morimotohid.com\/\"\u003eMorimoto\u003c\/a\u003e Elite Systems have earned their reputation amongst many as the aftermarket's best set of HID's. We urge you to check out the specs below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptioned Out:\u003c\/strong\u003e With a variety of available options, the Morimoto Elite HID system can be configured perfectly just for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHID Ballasts:\u003c\/strong\u003e \u003cspan\u003eDesigned in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHID Bulbs:\u003c\/strong\u003e The Morimoto XB H1 HID bulbs feature ceramic bases for precise alignment giving you a clean beam pattern. Quartz glass tubes to minimize UV output and maximize luminosity. Their Praxair (US) metal halide salts produce very accurate color temperatures in the 3K, 4K, 5K, and 6K range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e The Morimoto HD Relay Harness features an all-new completely sealed double 40A Relays, 14 gauge stranded copper wire wrapped in durable black tech-flex mesh that looks like a factory harness once installed. No cutting or splicing here: there are only five connections and they're all plug-n-play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCanbus Compatible:\u003c\/strong\u003e The optional Standalone Canbus harness substitute is recommended for European vehicles that display \"bulb out\" error messsages. They contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying lamp-out warnings on the dash.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacked Up:\u003c\/strong\u003e Let's not forget the 5-year warranty on the entire kit*. The Elite system is designed to run for 2500 hours, so that's what it's guaranteed for. Don't buy into empty promises from other shops offering BS \"lifetime\" warranties. No HID's will last you a lifetime, and if you think that company will be around long enough or even pick up the phone when you have a problem, guess again.[*XB55 kits have 3 year warranty]\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfidence:\u003c\/strong\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance.  We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBallasts: Morimoto XB35 (35W) or XB55 (50W)\u003cbr\u003eIgniters: Morimoto XB AMP\u003cbr\u003eBulbs: Morimoto XB H1\u003cbr\u003eHarness: Morimoto HD Relay or Standalone Canbus\u003cbr\u003eHardware: 8 Position Ballast Mounting Brackets\u003cbr\u003eWarranty: 5 Years for XB35 \/ 3 Years for XB55\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKIT OPTIONS EXPLAINED \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHD Relay: For most applications Standalone Canbus: For cars with \"lamp out\" warnings\u003cbr\u003eHID Ballasts: For 9-32V Electrical Systems\u003cbr\u003eHID Bulbs: For H1 fitment only\u003cbr\u003eDon't know? \u003ca href=\"http:\/\/www.philipsautolighting.com\/ajax_select.php\"\u003eFind my size!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eTECHNICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELECTRICAL SPECS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput DC 9-32V\u003cbr\u003eOutput: AC 85V 35\/50W\u003cbr\u003eMax Voltage 25KV (at start-up)\u003cbr\u003eRated Lifetime 2500 hours (XB35)\u003cbr\u003eRated Lifetime 2000 hours (XB55)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKELVIN AND LUMENS (35W)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3000K: \u003c\/b\u003eGolden Yellow (~2800 lm)\u003cbr\u003e\u003cb\u003e4500K: \u003c\/b\u003eWarm White (~3500 lm)\u003cbr\u003e\u003cb\u003e5500K: \u003c\/b\u003ePure White (~3400 lm)\u003cbr\u003e\u003cb\u003e6500K: \u003c\/b\u003eCool White (~3200 lm)\u003cbr\u003e\u003cb\u003eXB55 50W Ballasts: \u003c\/b\u003e(+20% intensity) (-20% lifespan)(-1000K color)\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 3000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340768854156,"sku":"BL11+ MM.N.010+ H20","price":322.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 3000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340768886924,"sku":"BL11+ MM.N.010+ H200","price":295.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 4000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340768919692,"sku":"BL11+ MM.N.012+ H20","price":320.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 4000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340768952460,"sku":"BL11+ MM.N.012+ H200","price":293.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 5000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340768985228,"sku":"BL11+ MM.N.013+ H20","price":316.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 5000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769017996,"sku":"BL11+ MM.N.013+ H200","price":289.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 6000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769050764,"sku":"BL11+ MM.N.014+ H20","price":316.0,"currency_code":"USD","in_stock":true},{"title":"35w \/ AMP: Morimoto XB Ballasts \/ H1: XB 6000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769083532,"sku":"BL11+ MM.N.014+ H200","price":289.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 3000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769116300,"sku":"BL21+ MM.N.010+ H20","price":264.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 3000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769149068,"sku":"BL21+ MM.N.010+ H200","price":237.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 4000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769181836,"sku":"BL21+ MM.N.012+ H20","price":262.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 4000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769214604,"sku":"BL21+ MM.N.012+ H200","price":235.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 5000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769247372,"sku":"BL21+ MM.N.013+ H20","price":258.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 5000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769280140,"sku":"BL21+ MM.N.013+ H200","price":231.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 6000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769312908,"sku":"BL21+ MM.N.014+ H20","price":258.0,"currency_code":"USD","in_stock":true},{"title":"55w \/ AMP: Morimoto XB Ballasts \/ H1: XB 6000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769345676,"sku":"BL21+ MM.N.014+ H200","price":231.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 3000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769378444,"sku":"BL70+ MM.N.010+ H20","price":246.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 3000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769411212,"sku":"BL70+ MM.N.010+ H200","price":219.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 4000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769443980,"sku":"BL70+ MM.N.012+ H20","price":244.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 4000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769476748,"sku":"BL70+ MM.N.012+ H200","price":217.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 5000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769509516,"sku":"BL70+ MM.N.013+ H20","price":240.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 5000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769542284,"sku":"BL70+ MM.N.013+ H200","price":213.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 6000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769575052,"sku":"BL70+ MM.N.014+ H20","price":240.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUXTEK HYLUX 2A88 35W CANBUS Ballasts \/ H1: XB 6000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769607820,"sku":"BL70+ MM.N.014+ H200","price":213.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 3000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769640588,"sku":"BL72+ MM.N.010+ H20","price":250.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 3000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769673356,"sku":"BL72+ MM.N.010+ H200","price":223.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 4000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769706124,"sku":"BL72+ MM.N.012+ H20","price":248.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 4000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769738892,"sku":"BL72+ MM.N.012+ H200","price":221.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 5000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769771660,"sku":"BL72+ MM.N.013+ H20","price":244.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 5000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769804428,"sku":"BL72+ MM.N.013+ H200","price":217.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 6000K HID Bulbs \/ HD Relay: H1\/H3","offer_id":39340769837196,"sku":"BL72+ MM.N.014+ H20","price":244.0,"currency_code":"USD","in_stock":true},{"title":"AMP: HYLUX A0050 45W Ballasts \/ H1: XB 6000K HID Bulbs \/ PWM Harness: Morimoto Standalone Canbus (H1\/H3)","offer_id":39340769869964,"sku":"BL72+ MM.N.014+ H200","price":217.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/h1_morimoto_elite_hid_headlight_system_kit_1.jpg?v=1750332853"},{"product_id":"03-09-4runner-d2s-5-0-g5-r-brackets","title":"03-09 4Runner D2S 5.0-G5-R Brackets","description":"\u003cp\u003eRetrofit your \u003cstrong\u003eToyota 4 Runner (4th Gen)\u003c\/strong\u003e with a stainless steel, laser-cut C-Bracket. Fits 2003, 2004, 2005, 2006, 2007 2008 and 2009 \u003cstrong\u003eToyota 4 Runner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC-Brackets replicate the factory mounting points allowing for a no hassle installation.\u003c\/p\u003e\n\u003cp\u003eThese Brackets convert the factory halogen projectors found in the \u003cstrong\u003eToyota 4 Runner\u003c\/strong\u003e\u003cb\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/b\u003eto proper bi-xenon projectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For 2002-2005 Requires Purchase of face-light headlights\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance.  We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 06-09 4Runner D2S 5.0\/G5-R Brackets\u003c\/p\u003e","brand":"Custom Brackets \u0026 Designs","offers":[{"title":"Default Title","offer_id":33925680332940,"sku":"06094RUNNERBRACKETS","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/dsc_0416.jpg?v=1582721954"},{"product_id":"06-09-4runner-h1-7-0-brackets","title":"06-09 4Runner H1 8.0 \/ D2S Micro Brackets","description":"\u003cp\u003eRetrofit your \u003cstrong\u003eToyota 4 Runner (4th Gen)\u003c\/strong\u003e with a stainless steel, laser-cut C-Bracket. Fits 2003, 2004, 2005, 2006, 2007 2008 and 2009 \u003cstrong\u003eToyota 4 Runner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC-Brackets replicate the factory mounting points allowing for a no hassle installation.\u003c\/p\u003e\n\u003cp\u003eThese Brackets convert the factory halogen projectors found in the \u003cstrong\u003eToyota 4 Runner\u003c\/strong\u003e\u003cb\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/b\u003eto proper bi-xenon projectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For 2002-2005 Requires Purchase of face-light headlights\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 06-09 4Runner H1 8.0 \/ D2S Micro Brackets\u003c\/p\u003e","brand":"Custom Brackets \u0026 Designs","offers":[{"title":"Default Title","offer_id":33925679186060,"sku":"06094RUNNERBRACKETSH17","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/dsc_0428.jpg?v=1582722007"},{"product_id":"mr2-spyder-to-mini-h1-7-0-brackets","title":"MR2 Spyder to Mini H1 8.0 \/ D2S Micro Brackets","description":"\u003cp\u003eRetrofit your \u003cstrong\u003eToyota MR2\u003c\/strong\u003e with a stainless steel, laser-cut C-Bracket. Fits 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 200y \u003cstrong\u003eToyota MR2 W30 with JDM Projector Headlights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eC-Brackets replicate the factory mounting points allowing for a no hassle installation.\u003c\/p\u003e\n\u003cp\u003eThese Brackets convert the factory halogen projectors found in the \u003cstrong\u003eToyota MR2\u003c\/strong\u003e\u003cb\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/b\u003eto proper bi-xenon projectors.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e*Please allow 1-3 days for processing and shipping*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x Toyota Mr2 Morimoto H1 8.0 \/ D2S Micro Conversion Brackets\u003c\/p\u003e","brand":"Custom Brackets \u0026 Designs","offers":[{"title":"Default Title","offer_id":33925734793356,"sku":"MR2BRACKETS","price":121.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/img_7961.jpg?v=1582723737"},{"product_id":"bare-retro-quik-brackets-hardware","title":"Retro-Quik Brackets (Brackets Only)","description":"\u003cdiv\u003e\n\u003cstrong\u003eNow Sold Separately!\u003c\/strong\u003e��For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive.��\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGood Stuff:\u003c\/strong\u003e��100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:��\u003c\/strong\u003eThese brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConfidence:��\u003c\/strong\u003eOrder with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRetroQuick Brackets: 2x Pcs (Application Varies)���\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eRetroQuik Hardware:��All Necessary (Varies)���\u003c\/div\u003e\n\u003cdiv\u003eProjectors: Not Included!\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eUNIVERSAL:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003e06-14 IMPREZA:��:4TL-R���\u003c\/div\u003e\n\u003cdiv\u003eFORD FUSION:��Mini H1 7.0 or Mini D2S 4.0\/5.0���\u003c\/div\u003e\n\u003cdiv\u003eBOSCH LOW BEAM:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003eNISSAN ALTIMA\/MAXIMA:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003e15+ SUBARU WRX:��Mini H1 7.0\u003c\/div\u003e\n\u003cdiv\u003e���PORSCHE 993:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003eSCION FR-S:��Mini H1 7.0\u003c\/div\u003e\n\u003cdiv\u003e���MAZDA 6:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003eSUBARU LEGACY:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003eSPYDER:��Super H1���\u003c\/div\u003e\n\u003cdiv\u003eSPEC-D:��Super H1���\u003c\/div\u003e\n\u003cdiv\u003eAUDI A4:��Mini H1 7.0���\u003c\/div\u003e\n\u003cdiv\u003eTOYOTA CAMRY:��Mini H1 7.0\u003c\/div\u003e\n\u003cdiv\u003e���DODGE RAM:��Mini D2S 5.0\u003c\/div\u003e\n\u003cdiv\u003e���BMW E36:��FX-R 3.0 (2.5\")���ZKW E46:��Mini D2S 5.0\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eBRACKET MATERIAL:��G10 Fiberglass���\u003c\/div\u003e\n\u003cdiv\u003eHARDWARE MATERIAL:��Automotive grade Stainless\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Morimoto","offers":[{"title":"RQ Hardware: Hella E55 \/ EVOX-R (D2S 5.0\/G5)","offer_id":32391574454412,"sku":"RQ103","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Subaru Legacy (H1 8.0)","offer_id":32391574519948,"sku":"RQ130","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware:  Camry \/ FRS (H1 8.0)","offer_id":32391574552716,"sku":"RQ30","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: E46\/ZKW Projectors (D2S 5.0)","offer_id":32391574651020,"sku":"RQ153","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Bosch Low Beam (H1 8.0 \/ Micro D2S)","offer_id":32391574716556,"sku":"RQ20","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Universal - Back (H1 8.0)","offer_id":32391574749324,"sku":"RQ155","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Altima\/Maxima (H1 8.0)","offer_id":32391574782092,"sku":"RQ70","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Universal - Front (H1 8.0)","offer_id":32391574814860,"sku":"RQ150","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: 14-18 4Runner (M LED)","offer_id":32391574880396,"sku":"RQ104","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Mazda6 \/ TT (H1 8.0)","offer_id":32391574913164,"sku":"RQ90","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Ford Fusion (H1 8.0)","offer_id":32391575011468,"sku":"RQ50","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Audi A4 B6 (H1 8.0)","offer_id":32391575109772,"sku":"RQ15","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: 15-17 WRX (H1 8.0 )","offer_id":32391575142540,"sku":"RQ200","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Dodge RAM (D2S 5.0\/G5)","offer_id":32391575175308,"sku":"RQ101","price":60.0,"currency_code":"USD","in_stock":true},{"title":"RQ Hardware: Valeo Bi-Xenon (D2S 5.0\/G5)","offer_id":32391575208076,"sku":"RQ152","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/dsc_0471_2.jpg?v=1750331700"},{"product_id":"toyota-4runner-90-95-profile-prism-fitted-halos-kit","title":"Toyota 4Runner (90-95): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota 4Runner:::1990-1995|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136001511564,"sku":"EDC01278","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_bbd5c7f9-4557-41fd-a9cd-7d89d0ad41af.jpg?v=1750297862"},{"product_id":"toyota-celica-94-99-profile-prism-fitted-halos-kit","title":"Toyota Celica (94-99): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::4x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Celica:::1994-1999|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136001544332,"sku":"EDC01279","price":371.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_41dced1d-2f8a-472e-83b8-98c012a392bb.jpg?v=1750297861"},{"product_id":"toyota-tacoma-98-00-profile-prism-fitted-halos-kit","title":"Toyota Tacoma (98-00): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tacoma:::1998-2000|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136001577100,"sku":"EDC01280","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_e5de09f6-a038-4134-8954-4263be977823.jpg?v=1750297859"},{"product_id":"toyota-4runner-99-02-profile-prism-fitted-halos-kit","title":"Toyota 4Runner (99-02): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota 4Runner:::1999-2002|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136001937548,"sku":"EDC01281","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_a0eeb4b5-ea18-4450-8cb3-a9524f2dacc9.jpg?v=1750297858"},{"product_id":"toyota-celica-00-05-profile-prism-fitted-halos-kit","title":"Toyota Celica (00-05): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Celica:::2000-2005|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136001970316,"sku":"EDC01283","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_43547872-51be-46b7-93d3-2e9c40bd64c2.jpg?v=1750297857"},{"product_id":"toyota-tacoma-01-04-profile-prism-fitted-halos-kit","title":"Toyota Tacoma (01-04): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tacoma:::2001-2004|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002003084,"sku":"EDC01285","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_c5adaef1-7f68-4106-b707-973557aedd71.jpg?v=1750297855"},{"product_id":"toyota-4runner-03-05-profile-prism-fitted-halos-kit","title":"Toyota 4Runner (03-05): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::4x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota 4Runner:::2003-2005|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002035852,"sku":"EDC01286","price":292.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_9c66196c-c8b5-4531-ae30-6c017b132241.jpg?v=1750297854"},{"product_id":"toyota-tacoma-05-11-profile-prism-fitted-halos-kit","title":"Toyota Tacoma (05-11): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tacoma:::2005-2011|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002101388,"sku":"EDC01288","price":178.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_2dd4c68b-5ecc-44d4-a28f-77a6754964df.jpg?v=1750297853"},{"product_id":"toyota-4runner-06-09-profile-prism-fitted-halos-kit","title":"Toyota 4Runner (06-09): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::4x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota 4Runner:::2006-2009|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002560140,"sku":"EDC01289","price":236.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_7a969459-38db-4f19-874b-19881925c17b.jpg?v=1750297852"},{"product_id":"toyota-camry-07-09-profile-prism-fitted-halos-kit","title":"Toyota Camry (07-09): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Camry:::2007-2009|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002592908,"sku":"EDC01290","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_bd1b8a96-2836-4061-8480-ae6a20b13711.jpg?v=1750297850"},{"product_id":"toyota-tundra-07-13-profile-prism-fitted-halos-kit","title":"Toyota Tundra (07-13): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tundra:::2007-2013|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002625676,"sku":"EDC01291","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_41f27e0a-1a46-4bf8-bc23-125c1fe03632.jpg?v=1750297849"},{"product_id":"toyota-fj-cruiser-07-14-profile-prism-fitted-halos-kit","title":"Toyota FJ Cruiser (07-14): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota FJ Cruiser:::2007-2014|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002658444,"sku":"EDC01292","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_e3b3134e-4307-460e-b5fc-7d726949611b.jpg?v=1750297848"},{"product_id":"toyota-camry-10-11-profile-prism-fitted-halos-kit","title":"Toyota Camry (10-11): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Camry:::2010-2011|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002691212,"sku":"EDC01294","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_890e81a8-04cf-48a9-bb67-77091227b2cf.jpg?v=1750297847"},{"product_id":"toyota-4runner-10-13-profile-prism-fitted-halos-kit","title":"Toyota 4Runner (10-13): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota 4Runner:::2010-2013|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136002723980,"sku":"EDC01295","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_aece5f64-d534-43e1-9bfd-2115eda36fe9.jpg?v=1750297846"},{"product_id":"toyota-prius-10-15-profile-prism-fitted-halos-kit","title":"Toyota Prius (10-15): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Prius:::2010-2015|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003084428,"sku":"EDC01296","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_30b04d03-047a-439f-9810-57b6eed71360.jpg?v=1750297844"},{"product_id":"toyota-camry-12-14-profile-prism-fitted-halos-kit","title":"Toyota Camry (12-14): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Camry:::2012-2014|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003117196,"sku":"EDC01298","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_cefd5d10-a6c0-494e-87de-d648bc786f3a.jpg?v=1750297843"},{"product_id":"toyota-tacoma-12-15-profile-prism-fitted-halos-kit","title":"Toyota Tacoma (12-15): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tacoma:::2012-2015|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003149964,"sku":"EDC01299","price":172.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_3955c421-b407-452f-bfa7-5a8be698ef1c.jpg?v=1750297842"},{"product_id":"toyota-4runner-14-20-profile-prism-fitted-halos-kit","title":"Toyota 4Runner (14-20): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota 4Runner:::2014-2020|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003182732,"sku":"EDC01300","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_c6826f14-e59f-484b-8205-0313c83b101b.jpg?v=1750297841"},{"product_id":"toyota-tundra-14-20-profile-prism-fitted-halos-kit","title":"Toyota Tundra (14-20): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tundra:::2014-2020 (w\/o OEM LEDs)|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003215500,"sku":"EDC01301","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_f6ea6104-ff0d-4868-a32f-917624f1f38b.jpg?v=1750297840"},{"product_id":"toyota-sienna-15-16-profile-prism-fitted-halos-kit","title":"Toyota Sienna (15-16): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Sienna:::2015-2016|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003608716,"sku":"EDC01302","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_503ac766-dab6-4bef-84b0-c753a8b52061.jpg?v=1750297838"},{"product_id":"toyota-tacoma-16-18-profile-prism-fitted-halos-kit","title":"Toyota Tacoma (16-18): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eToyota Tacoma:::2016-2021 (w\/o OEM LEDs)|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34136003641484,"sku":"EDC01303","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_39606952-fba3-42be-9c7c-be0a175cdb53.jpg?v=1750297837"},{"product_id":"black-series-to-g5-brackets-civic-altima-maxima","title":"Black Series to G5 Projector Retrofit Brackets (Civic \/ Altima \/Maxima\/SRX)","description":"\u003cp\u003eRetrofit your \u003cb\u003eBlack Series \u003c\/b\u003eprojector equipped vehicle with a stainless steel, laser-cut bracket. HID or LED projectors are compatible. \u003c\/p\u003e\n\u003cp\u003eThese brackets replicate the factory mounting points allowing for a no hassle installation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x Black Series to G5 Brackets (Civic, Altima, Maxima)\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eConfirmed Fitments:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2013-2018 Nissan Altima\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2009-2018 Nissan Maxima\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e10th Gen Honda Civic 2016+\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eCadillac SRX D2S 5.0 \/ G5 Brackets (Non-AFS Version)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":34433165262988,"sku":"B0112","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DSC_3980F_7a7904c1-befd-4c9b-9395-dc6b82fe46a6.jpg?v=1652983962"},{"product_id":"rx350-to-g5","title":"RX350 to G5 Projector Retrofit Brackets","description":"\u003cp\u003eRetrofit your \"RX350\"\u003cstrong\u003e \u003c\/strong\u003eProjector equipped vehicle\u003cstrong\u003e \u003c\/strong\u003ewith a stainless steel, laser-cut bracket. This is commonly found in Toyota \u0026amp; Lexus models that feature a 3\" projector unit that has a silver lens holder. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e  \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x RX350 to G5 Brackets\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eConfirmed Fitments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e2016 Mazda 6\u003c\/p\u003e\n\u003cp\u003eToyota Highlander, Tacoma, Prius, Camry, etc\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":39347090063500,"sku":"B021","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/IMG_2119.jpg?v=1620149452"},{"product_id":"copy-of-4gtl-to-g5-brackets-honda","title":"4GTL to G5 Projector Retrofit Brackets (Toyota \/ Mazda) 4TLR","description":"\u003cp\u003eRetrofit your 4GTL projector\u003cstrong\u003e \u003c\/strong\u003eequipped Toyota or Mazda vehicle to any projector using the G5 bolt pattern; MLED 2.0 included! \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 4GTL to G5 Brackets (Toyota Version)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed Fitments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eToyota Headlights with \"4GTL\" (4th Gen TL) Bolt Pattern - Sienna 4TLR\u003c\/p\u003e\n\u003cp\u003e2014-2016 Mazda 3\u003c\/p\u003e\n\u003cp\u003e2016 Mazda CX-5\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":39351545200780,"sku":"B121","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/IMG_19641.jpg?v=1620249829"},{"product_id":"14-20-toyota-4runner-to-g5-brackets","title":"14-20 Toyota 4Runner \/ Lexus IS \/ Lexus GX to G5 Projector Retrofit Brackets","description":"\u003cp\u003eRetrofit your 14-20 Toyota 4Runner original halogen projectors to proper HID or LED projectors. These feature G5 bolt pattern - compatible with MLED with proper trimmings. \u003c\/p\u003e\n\u003cp\u003eThese brackets replicate the factory mounting points allowing for a no hassle installation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 14-20 Toyota 4Runner to G5 Brackets\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAlso fits - \u003cb data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e12-13 LEXUS IS250 \/ IS350 \u0026amp; 10-13 GX460\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":39351666442380,"sku":"B0133","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DSC_3985F.jpg?v=1620251478"},{"product_id":"rav4-to-g5-brackets","title":"16-18 Rav4 to G5 Projector Retrofit Brackets","description":"\u003cp\u003eRetrofit your halogen\u003cstrong\u003e \u003c\/strong\u003eequipped 2016 2017 2018 Toyota Rav4 to G5 Projectors\u003cstrong\u003e \u003c\/strong\u003ewith a bracket. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 2016-2018 Toyota Rav4 Brackets\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":39358152016012,"sku":"B092","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/IMG_19661.jpg?v=1620397676"},{"product_id":"koito-bi-led-to-mled-brackets","title":"Koito Bi-LED to MLED 2.0 Projector Retrofit Brackets","description":"\u003cp\u003eThese Koito Bi-LED projectors are \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eusually found in Toyota \/ Lexus vehicles such as \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eToyota Camry, Toyota Land Cruiser, Lexus ES. Please confirm fitment prior to ordering. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x Koito Bi-LED to MLED 2.0 Brackets\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":39399007322252,"sku":"B57","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/IMG_1189.jpg?v=1622037224"},{"product_id":"rx330-rx350-to-g5-projector-retrofit-brackets-04-09-afs-models","title":"Lexus RX330 \/ RX350 to G5 Projector Retrofit Brackets (04-09 AFS Models)","description":"\u003cp\u003eRetrofit your 2004-2009 RX330 \/ RX350 AFS HID projector equipped vehicle\u003cstrong\u003e \u003c\/strong\u003ewith a stainless steel, laser-cut bracket.\u003c\/p\u003e\n\u003cp\u003e*This bracket works best with LED projectors using a G5 mounting style. G5-BRT may work additional trimming to bracket and projector. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e  \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x RX330 \/ RX350 AFS (04-09) to G5 Brackets\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eConfirmed Fitments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e04-09 RX330\/RX350 Lexus (Must be equipped with factory xenon AFS system)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":42619299954828,"sku":"B008","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/files\/Untitleddesign_3.png?v=1713273280"},{"product_id":"mws_apo_1_g2_toyota-celica-94-99-profile-prism-fitted-halos-kit","title":"Toyota Celica (94-99): Profile Prism Fitted Halos (Kit)","description":"PLEASE DO NOT MODIFY!\u003cbr\u003eIT IS A SERVICE PRODUCT AUTO-GENERATED BY MAGEWORX APO PRODUCT OPTIONS APP.","brand":"Profile","offers":[{"title":"Default Title #MWS Options 1","offer_id":44363476959372,"sku":"EDC01279","price":371.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_41dced1d-2f8a-472e-83b8-98c012a392bb.jpg?v=1750297861"},{"product_id":"mws_apo_1_g2_toyota-prius-10-15-profile-prism-fitted-halos-kit","title":"Toyota Prius (10-15): Profile Prism Fitted Halos (Kit)","description":"PLEASE DO NOT MODIFY!\u003cbr\u003eIT IS A SERVICE PRODUCT AUTO-GENERATED BY MAGEWORX APO PRODUCT OPTIONS APP.","brand":"Profile","offers":[{"title":"Default Title #MWS Options 1","offer_id":44497992974476,"sku":"EDC01296","price":199.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_30b04d03-047a-439f-9810-57b6eed71360.jpg?v=1750297844"}],"url":"https:\/\/lightwerkz.net\/en-ca\/collections\/toyota\/15-off-wholesale.oembed","provider":"Lightwerkz Global Inc","version":"1.0","type":"link"}