{"title":"LED Halos and Strips","description":"","products":[{"product_id":"halo-lights-led-150mm-160mm-switchback-four-diode-dynamics","title":"Halo Lights LED 150mm\/160mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm\/160mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127464865932,"sku":"DD2279","price":274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2279-GBFG.jpg?v=1749011520"},{"product_id":"halo-lights-led-70mm-80mm-switchback-four-diode-dynamics","title":"Halo Lights LED 70mm\/80mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm\/80mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127465095308,"sku":"DD2276","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2276-GBFG.jpg?v=1749011519"},{"product_id":"halo-lights-led-90mm-120mm-switchback-four-diode-dynamics","title":"Halo Lights LED 90mm\/120mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm\/120mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127466602636,"sku":"DD2269","price":224.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2269-GBFG.jpg?v=1749011517"},{"product_id":"halo-lights-led-70mm-90mm-switchback-four-diode-dynamics","title":"Halo Lights LED 70mm\/90mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm\/90mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127467913356,"sku":"DD2264","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2264-GBFG.jpg?v=1749011516"},{"product_id":"halo-lights-led-120mm-switchback-four-diode-dynamics","title":"Halo Lights LED 120mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127469846668,"sku":"DD2249","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_5cad46e7-5171-4e66-8bd5-2eeee7b20565.jpg?v=1749011506"},{"product_id":"halo-lights-led-120mm-red-four-diode-dynamics","title":"Halo Lights LED 120mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127469977740,"sku":"DD2248","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2248-GBFG.jpg?v=1749011505"},{"product_id":"gmc-sierra-led-halos-switchback-16-18-sierra-1500-diode-dynamics","title":"GMC Sierra LED Halos Switchback 16-18 Sierra 1500 Diode Dynamics","description":"\u003cp\u003eTime for an upgrade! From the factory, the Sierra comes with a white C-shaped DRL that from certain angles can look segmented and distorted. Diode Dynamics is excited to release our HD LED Halos for the 2016-2018 GMC Sierra that provides a much brighter, more uniform appearance compared to the factory optics. These computer-designed LED Halos are circuit boards that align perfectly behind the factory diffusing reflector. Available in switchback and amber-only, both versions also function as an additional front turn signal for a custom, yet functional look!\u003c\/p\u003e\n\u003cp\u003eHigh output, clean appearance. The custom-designed LED modules replace the factory bulb or single LED, illuminating with a much higher intensity. With our proprietary high-density HDLED technology, these modules are populated with over 500 LED chips, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When it's off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003ePure white color. Assembled in USA, the modules light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white!\u003cbr\u003eConstant-current power.\u003c\/p\u003e\n\u003cp\u003eTo power the modules efficiently, your order includes two custom-designed drivers, which feature transient voltage suppression, reverse protection, and a switching driver for extremely high reliability over time. And here's what really makes this product shine over the competition: with an embedded microcontroller, the drivers utilize multi-stage PWM dimming, to allow for a half-brightness white, for use at night (parking lights), as well as a full-power white, for use as DRL during the day. Finally, the amber is run at even higher power, making the turn signal easily visible in broad daylight!\u003c\/p\u003e\n\u003cp\u003eProfessional installation is strongly recommended, as the factory headlights must be opened for installation. The halos must be custom-mounted in position using adhesive or beading wire.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e22016-2018 GMC Sierra LED Halos\u003c\/li\u003e\n\u003cli\u003eComputer-designed LED Halos for the 2016-2018 Sierra 1500\u003c\/li\u003e\n\u003cli\u003eHuge increase in brightness, with pure white and brilliant amber output\u003c\/li\u003e\n\u003cli\u003eMore uniform output, upgrade from segmented factory optics\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) application specific LED Halos\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails with T-taps\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not compatible with 2016-2018 GMC Sierra 2500 or 3500. Application: DRL Make: GMC Model: Sierra 1500 Years: 2016, 2017, 2018 Electrical Compatibility: No electrical issues (tested and confirmed)\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasured Lumens: 670 (Switchback Halo - Amber Turn Signal)\u003c\/li\u003e\n\u003cli\u003eColor Temp (CCT): 2000K, 6000K Power (watts): 11.65 (Switchback Halo - Amber Turn Signal)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 9-16V Current (amps at 13.2V): .910 (Switchback Halo - Amber Turn Signal)\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eLED Emitter: Custom-Manufactured Connector(s): JST Inline\u003c\/li\u003e\n\u003cli\u003eConnectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Features: External, Waterproof, Constant Current\u003c\/li\u003e\n\u003cli\u003eMaterials: FR4 PCB\u003c\/li\u003e\n\u003cli\u003eCooling: Passive, no heatsink Product Dimensions (in): 14.25x8.75x2.25\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127485706380,"sku":"DD2177","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2177-GBFG.jpg?v=1749011489"},{"product_id":"halo-lights-led-110mm-switchback-four-diode-dynamics","title":"Halo Lights LED 110mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127486623884,"sku":"DD2160","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2160-GBFG.jpg?v=1749011488"},{"product_id":"halo-lights-led-110mm-red-four-diode-dynamics","title":"Halo Lights LED 110mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127486656652,"sku":"DD2159","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2159-GBFG.jpg?v=1749011486"},{"product_id":"halo-lights-led-150mm-switchback-single-diode-dynamics","title":"Halo Lights LED 150mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511462028,"sku":"DD2068S","price":67.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2068S-GBFG.jpg?v=1749011467"},{"product_id":"halo-lights-led-150mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 150mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511691404,"sku":"DD2068","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2068-GBFG.jpg?v=1749011466"},{"product_id":"halo-lights-led-140mm-switchback-single-diode-dynamics","title":"Halo Lights LED 140mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511789708,"sku":"DD2067S","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2067S-GBFG.jpg?v=1749011465"},{"product_id":"halo-lights-led-140mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 140mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511920780,"sku":"DD2067","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_9c390ef8-a432-4478-b2f3-7054dfec3c29.jpg?v=1749011464"},{"product_id":"halo-lights-led-130mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 130mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127512281228,"sku":"DD2066","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_369edcf6-2ba5-477c-9596-f696445b9b65.jpg?v=1749011461"},{"product_id":"halo-lights-led-120mm-switchback-single-diode-dynamics","title":"Halo Lights LED 120mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127514804364,"sku":"DD2065S","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2065S-GBFG.jpg?v=1749011460"},{"product_id":"halo-lights-led-120mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 120mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127515525260,"sku":"DD2065","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_6db73804-7a61-41c6-94c1-e82102801350.jpg?v=1749011459"},{"product_id":"halo-lights-led-110mm-switchback-single-diode-dynamics","title":"Halo Lights LED 110mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127515656332,"sku":"DD2064S","price":57.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2064S-GBFG.jpg?v=1749011458"},{"product_id":"halo-lights-led-110mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 110mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127515754636,"sku":"DD2064","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_1868601a-3690-4aa5-8588-d52f2225e189.jpg?v=1749011457"},{"product_id":"halo-lights-led-100mm-switchback-single-diode-dynamics","title":"Halo Lights LED 100mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516016780,"sku":"DD2063S","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2063S-GBFG.jpg?v=1749011456"},{"product_id":"halo-lights-led-100mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 100mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516246156,"sku":"DD2063","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_2020ab94-7a64-4702-9b4d-2fad75f2dee9.jpg?v=1749011454"},{"product_id":"halo-lights-led-90mm-switchback-single-diode-dynamics","title":"Halo Lights LED 90mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516442764,"sku":"DD2062S","price":52.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2062S-GBFG.jpg?v=1749011453"},{"product_id":"halo-lights-led-90mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 90mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516704908,"sku":"DD2062","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_0218155c-f087-46c4-b8e2-b0262ab849d9.jpg?v=1749011452"},{"product_id":"halo-lights-led-80mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 80mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127517687948,"sku":"DD2061","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_9c615fb8-85d7-41a8-9d4f-2cb8e31cae7d.jpg?v=1749011451"},{"product_id":"halo-lights-led-70mm-switchback-single-diode-dynamics","title":"Halo Lights LED 70mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127518179468,"sku":"DD2060S","price":47.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2060S-GBFG.jpg?v=1749011450"},{"product_id":"halo-lights-led-70mm-switchback-four-diode-dynamics","title":"Halo Lights LED 70mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127518867596,"sku":"DD2060Q","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2060Q-GBFG.jpg?v=1749011449"},{"product_id":"halo-lights-led-70mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 70mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127520571532,"sku":"DD2060","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_977ca354-6b1a-4750-a4f7-e49d4167db59.jpg?v=1749011447"},{"product_id":"halo-lights-led-50mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 50mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127524470924,"sku":"DD2058","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2058-GBFG.jpg?v=1749011443"},{"product_id":"halo-lights-led-160mm-red-single-diode-dynamics","title":"Halo Lights LED 160mm Red Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e160mm Red Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127525093516,"sku":"DD2057S","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2057S-GBFG.jpg?v=1749011442"},{"product_id":"halo-lights-led-160mm-red-pair-diode-dynamics","title":"Halo Lights LED 160mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e160mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127526273164,"sku":"DD2057","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2057-GBFG.jpg?v=1749011441"},{"product_id":"halo-lights-led-150mm-red-pair-diode-dynamics","title":"Halo Lights LED 150mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127526895756,"sku":"DD2056","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2056-GBFG.jpg?v=1749011439"},{"product_id":"halo-lights-led-140mm-red-four-diode-dynamics","title":"Halo Lights LED 140mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127527125132,"sku":"DD2055Q","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2055Q-GBFG.jpg?v=1749011438"},{"product_id":"halo-lights-led-140mm-red-pair-diode-dynamics","title":"Halo Lights LED 140mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127527911564,"sku":"DD2055","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_c79e6c7d-dff4-4b79-b958-93333bd870a5.jpg?v=1749011436"},{"product_id":"halo-lights-led-130mm-red-single-diode-dynamics","title":"Halo Lights LED 130mm Red Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130mm Red Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127528239244,"sku":"DD2054S","price":62.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2054S-GBFG.jpg?v=1749011434"},{"product_id":"halo-lights-led-130mm-red-pair-diode-dynamics","title":"Halo Lights LED 130mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127528337548,"sku":"DD2054","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_342d6c9c-b120-4e93-8834-903f117785c4.jpg?v=1749011432"},{"product_id":"halo-lights-led-120mm-red-pair-diode-dynamics","title":"Halo Lights LED 120mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127528599692,"sku":"DD2053","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_3b313918-8afe-4afb-a19d-db201717dc6b.jpg?v=1749011428"},{"product_id":"halo-lights-led-110mm-red-single-diode-dynamics","title":"Halo Lights LED 110mm Red Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Red Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127528730764,"sku":"DD2052S","price":57.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2052S-GBFG.jpg?v=1749011426"},{"product_id":"halo-lights-led-110mm-red-pair-diode-dynamics","title":"Halo Lights LED 110mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127528894604,"sku":"DD2052","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_b8f3d405-63fa-4bcb-aceb-de17922a81ff.jpg?v=1749011425"},{"product_id":"halo-lights-led-100mm-red-pair-diode-dynamics","title":"Halo Lights LED 100mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127529910412,"sku":"DD2051","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_fdfdca66-76fb-4626-8a8a-f1c2633bd8dc.jpg?v=1749011424"},{"product_id":"halo-lights-led-90mm-red-pair-diode-dynamics","title":"Halo Lights LED 90mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127530139788,"sku":"DD2050","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_b3da7564-d6b7-46c6-a7e5-cd44e335429e.jpg?v=1749011423"},{"product_id":"halo-lights-led-80mm-red-pair-diode-dynamics","title":"Halo Lights LED 80mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127530860684,"sku":"DD2049","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_56735a48-3b62-4bc9-9199-583e756cd98e.jpg?v=1749011418"},{"product_id":"halo-lights-led-70mm-red-single-diode-dynamics","title":"Halo Lights LED 70mm Red Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Red Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127531614348,"sku":"DD2048S","price":47.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2048S-GBFG.jpg?v=1749011416"},{"product_id":"halo-lights-led-70mm-red-four-diode-dynamics","title":"Halo Lights LED 70mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127532826764,"sku":"DD2048Q","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2048Q-GBFG.jpg?v=1749011415"},{"product_id":"halo-lights-led-70mm-red-pair-diode-dynamics","title":"Halo Lights LED 70mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127534006412,"sku":"DD2048","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red_4d13b38b-4953-4193-877f-6174a6cfb35e.jpg?v=1749011414"},{"product_id":"halo-lights-led-60mm-red-single-diode-dynamics","title":"Halo Lights LED 60mm Red Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60mm Red Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127535710348,"sku":"DD2047S","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2047S-GBFG.jpg?v=1749011413"},{"product_id":"halo-lights-led-60mm-red-pair-diode-dynamics","title":"Halo Lights LED 60mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127536857228,"sku":"DD2047","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_led_halo_red.jpg?v=1749011411"},{"product_id":"halo-lights-led-150mm-160mm-red-four-diode-dynamics","title":"Halo Lights LED 150mm\/160mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm\/160mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127741558924,"sku":"DD2278","price":274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2278-GBFG.jpg?v=1749010980"},{"product_id":"halo-lights-led-70mm-80mm-red-four-diode-dynamics","title":"Halo Lights LED 70mm\/80mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm\/80mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127743099020,"sku":"DD2275","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2275-GBFG.jpg?v=1749010980"},{"product_id":"halo-lights-led-100mm-130mm-red-four-diode-dynamics","title":"Halo Lights LED 100mm\/130mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100mm\/130mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127744573580,"sku":"DD2271","price":234.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2271-GBFG.jpg?v=1749010979"},{"product_id":"halo-lights-led-90mm-120mm-red-four-diode-dynamics","title":"Halo Lights LED 90mm\/120mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm\/120mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127744606348,"sku":"DD2268","price":224.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2268-GBFG.jpg?v=1749010978"},{"product_id":"halo-lights-led-70mm-90mm-red-four-diode-dynamics","title":"Halo Lights LED 70mm\/90mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm\/90mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127745917068,"sku":"DD2263","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2263-GBFG.jpg?v=1749010977"}],"url":"https:\/\/lightwerkz.net\/en-ca\/collections\/led-halos-and-strips\/15-wholesale.oembed?page=2","provider":"Lightwerkz Global Inc","version":"1.0","type":"link"}