NHK Pro Plus 2.5" Bi-LED Projectors (LHD) NHK Pro Plus 2.5" Bi-LED Projectors (LHD) NHK Little Brother: The NHK 2.5" Pro Plus is the little brother to the NHK IV Plus 3" unit. It's advantage is that it's slightly shorter and has a smaller lens; think Chevy Cateye conversions! It doesn't pack quite as large of a punch as the IV Plus, but it's also in a different pricing category. You can't go wrong with the NHK Plus projectors - amazing value for the performance they both offer.  Solid Output: Our testing shows solid low beam distribution out of this unit. Peak intensity is located right at the step up of the cutoff. Output rivals high end bi-xenon projectors with Osram Nightbreaker Laser bulbs! As we test at lower points of the beam distribution, there is a drop off in intensity which shows this unit puts the light performance where it's needed most.   Wait, There's More: This unit features an added bonus! There is an additional LED reflector/chip on the lower portion of the projector to maximize high beam performance. This provides the best LED based hot spot on the market aside from Laser assisted high beams, which command a much higher price point.  Color: Featuring a cool white 6000K color temperature with a thick blue band at the cutoff for maximum color flicker that spans across the whole beam pattern. If flicker is what you are into; this is your unit! Bolt Pattern: Featuring a "G5" bolt pattern gives you access to a long list of compatible retrofit brackets featured on our website. While this unit does not have a threaded shaft for easy reflector based installs; it can be retrofitted into many makes and models that have pre-made brackets for popular vehicles.  Noise: This unit features a whisper quiet fan in comparison to other LED projectors and bulbs on the market. Fan is located at the rear of the unit, please allow some space for air to recirculate if using a weather cap on the back of the unit.  All In One: The NHK Pro Plus Bi-LED is a complete package. No external drivers, just wire up the low and high beam and you are good to go. This is excellent for the users that hate mounting ballasts and additional wiring in their vehicles.  Wiring: Please note that these units come with 4 bare wire leads. One power and ground for each of the low and high beam inputs. We offer pre-attached 9006 and 9005 inputs for easier hook up. Single filament applications can use a direct connection to factory low beam plug with a high beam splitter. Dual filament applications will require a MotoControl wiring harness to make this unit plug and play. What's Included: 2x NHK Pro Plus 2.5" Bi-LED Projectors (LHD) + Centric Rings Warranty:  3 Years Tech Specs: Depth: 130mm Width: 108mm Height: 82mm

NHK Pro Plus 2.5" Bi-LED Projectors (LHD)

Code: NHKPROPLUSLHD
$200.00
In Stock
Add to Wishlist Add to Compare
  • FREE SHIPPING
    *EXCLUSIONS APPLY

  • FAST
    ORDER PROCESSING

  • HASSLE-FREE
    WARRANTY & RETURNS

Little Brother: The NHK 2.5" Pro Plus is the little brother to the NHK IV Plus 3" unit. It's advantage is that it's slightly shorter and has a smaller lens; think Chevy Cateye conversions! It doesn't pack quite as large of a punch as the IV Plus, but it's also in a different pricing category. You can't go wrong with the NHK Plus projectors - amazing value for the performance they both offer. 


Solid Output: Our testing shows solid low beam distribution out of this unit. Peak intensity is located right at the step up of the cutoff. Output rivals high end bi-xenon projectors with Osram Nightbreaker Laser bulbs! As we test at lower points of the beam distribution, there is a drop off in intensity which shows this unit puts the light performance where it's needed most.  

Wait, There's More: This unit features an added bonus! There is an additional LED reflector/chip on the lower portion of the projector to maximize high beam performance. This provides the best LED based hot spot on the market aside from Laser assisted high beams, which command a much higher price point. 

Color: Featuring a cool white 6000K color temperature with a thick blue band at the cutoff for maximum color flicker that spans across the whole beam pattern. If flicker is what you are into; this is your unit!

Bolt Pattern: Featuring a "G5" bolt pattern gives you access to a long list of compatible retrofit brackets featured on our website. While this unit does not have a threaded shaft for easy reflector based installs; it can be retrofitted into many makes and models that have pre-made brackets for popular vehicles. 

Noise: This unit features a whisper quiet fan in comparison to other LED projectors and bulbs on the market. Fan is located at the rear of the unit, please allow some space for air to recirculate if using a weather cap on the back of the unit. 

All In One: The NHK Pro Plus Bi-LED is a complete package. No external drivers, just wire up the low and high beam and you are good to go. This is excellent for the users that hate mounting ballasts and additional wiring in their vehicles. 

Wiring: Please note that these units come with 4 bare wire leads. One power and ground for each of the low and high beam inputs. We offer pre-attached 9006 and 9005 inputs for easier hook up. Single filament applications can use a direct connection to factory low beam plug with a high beam splitter. Dual filament applications will require a MotoControl wiring harness to make this unit plug and play.




What's Included:
2x NHK Pro Plus 2.5" Bi-LED Projectors (LHD) + Centric Rings




Warranty: 
3 Years




Tech Specs:
Depth: 130mm
Width: 108mm
Height: 82mm







Little Brother: The NHK 2.5" Pro Plus is the little brother to the NHK IV Plus 3" unit. It's advantage is that it's slightly shorter and has a smaller lens; think Chevy Cateye conversions! It doesn't pack quite as large of a punch as the IV Plus, but it's also in a different pricing category. You can't go wrong with the NHK Plus projectors - amazing value for the performance they both offer. 

Solid Output: Our testing shows solid low beam distribution out of this unit. Peak intensity is located right at the step up of the cutoff. Output rivals high end bi-xenon projectors with Osram Nightbreaker Laser bulbs! As we test at lower points of the beam distribution, there is a drop off in intensity which shows this unit puts the light performance where it's needed most.  
Wait, There's More: This unit features an added bonus! There is an additional LED reflector/chip on the lower portion of the projector to maximize high beam performance. This provides the best LED based hot spot on the market aside from Laser assisted high beams, which command a much higher price point. 
Color: Featuring a cool white 6000K color temperature with a thick blue band at the cutoff for maximum color flicker that spans across the whole beam pattern. If flicker is what you are into; this is your unit!
Bolt Pattern: Featuring a "G5" bolt pattern gives you access to a long list of compatible retrofit brackets featured on our website. While this unit does not have a threaded shaft for easy reflector based installs; it can be retrofitted into many makes and models that have pre-made brackets for popular vehicles. 
Noise: This unit features a whisper quiet fan in comparison to other LED projectors and bulbs on the market. Fan is located at the rear of the unit, please allow some space for air to recirculate if using a weather cap on the back of the unit. 
All In One: The NHK Pro Plus Bi-LED is a complete package. No external drivers, just wire up the low and high beam and you are good to go. This is excellent for the users that hate mounting ballasts and additional wiring in their vehicles. 
Wiring: Please note that these units come with 4 bare wire leads. One power and ground for each of the low and high beam inputs. We offer pre-attached 9006 and 9005 inputs for easier hook up. Single filament applications can use a direct connection to factory low beam plug with a high beam splitter. Dual filament applications will require a MotoControl wiring harness to make this unit plug and play.



What's Included: 2x NHK Pro Plus 2.5" Bi-LED Projectors (LHD) + Centric Rings



Warranty:  3 Years



Tech Specs: Depth: 130mm Width: 108mm Height: 82mm






What is your shipping cutoff time? 

Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

Will I receive a tracking number? 

Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order. 

Is shipping free? 

Orders over $99 qualify for free shipping within the contiguous  United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option. 

 

Return Window

We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date. 

Shipping 

Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process. 

Refunds/Store Credit

Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount.  Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us. 

Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines. 

Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.        

Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit. 

Exclusions

If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned. 

HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. 

Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)