{"title":"Honda","description":"","products":[{"product_id":"honda-accord-90-93-profile-prism-fitted-halos-kit","title":"Honda Accord (90-93): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Accord:::1990-1993|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135990567052,"sku":"EDC01150","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_0cd1d115-4eb3-4969-acce-71b6b6f7551b.jpg?v=1750298014"},{"product_id":"honda-del-sol-94-97-profile-prism-fitted-halos-kit","title":"Honda Del Sol (94-97): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Del Sol:::1994-1997|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135990599820,"sku":"EDC01153","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_f33561a9-9332-488c-b1a5-55ef2ebce93b.jpg?v=1750298013"},{"product_id":"honda-civic-96-98-profile-prism-fitted-halos-kit","title":"Honda Civic (96-98): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic:::1996-1998|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135990632588,"sku":"EDC01154","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_cacc35e9-c4a5-4a69-ad2a-96d718fe2aa0.jpg?v=1750298012"},{"product_id":"honda-civic-01-03-profile-prism-fitted-halos-kit","title":"Honda Civic (01-03): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic:::2001-2003|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135990665356,"sku":"EDC01156","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_0d5b82ab-b69f-48c2-9d80-fcbd8cdabeae.jpg?v=1750298011"},{"product_id":"honda-accord-03-07-profile-prism-fitted-halos-kit","title":"Honda Accord (03-07): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Accord:::2003-2007|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135990698124,"sku":"EDC01157","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_6865695c-eaf3-433f-b743-f551fe5fe4df.jpg?v=1750298009"},{"product_id":"honda-civic-04-05-profile-prism-fitted-halos-kit","title":"Honda Civic (04-05): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic:::2004-2005|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135990730892,"sku":"EDC01158","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_709eaee9-5ce1-47af-abed-304de016b5a4.jpg?v=1750298008"},{"product_id":"honda-civic-sedan-06-08-profile-prism-fitted-halos-kit","title":"Honda Civic Sedan (06-08): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::4x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic Sedan:::2006-2008|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991091340,"sku":"EDC01159","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_58c7a08c-a651-43e8-9deb-00cea8b4642f.jpg?v=1750298006"},{"product_id":"honda-accord-coupe-08-10-profile-prism-fitted-halos-kit","title":"Honda Accord Coupe (08-10): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Accord Coupe:::2008-2010|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991189644,"sku":"EDC01161","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_f54de216-dc46-45ed-9971-97eadb901613.jpg?v=1750298002"},{"product_id":"honda-accord-sedan-08-12-profile-prism-fitted-halos-kit","title":"Honda Accord Sedan (08-12): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::4x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Accord Sedan:::2008-2012|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991222412,"sku":"EDC01162","price":276.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_b2e07741-d9a8-4a33-9cbb-598e1f50000e.jpg?v=1750298001"},{"product_id":"honda-civic-sedan-09-11-profile-prism-fitted-halos-kit","title":"Honda Civic Sedan (09-11): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::4x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic Sedan:::2009-2011|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991255180,"sku":"EDC01163","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_55cafa7b-f8fa-46b1-aee8-856fee720a27.jpg?v=1750298000"},{"product_id":"honda-accord-coupe-11-12-profile-prism-fitted-halos-kit","title":"Honda Accord Coupe (11-12): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Accord Coupe:::2011-2012|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991615628,"sku":"EDC01164","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_b60cabc0-ee08-4cc9-8805-e0c69cae6356.jpg?v=1750297998"},{"product_id":"honda-civic-coupe-12-13-profile-prism-fitted-halos-kit","title":"Honda Civic Coupe (12-13): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic Coupe:::2012-2013|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991648396,"sku":"EDC01165","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_038faf25-2d3c-4af1-b854-161207bbc8f5.jpg?v=1750297997"},{"product_id":"honda-civic-sedan-12-15-profile-prism-fitted-halos-kit","title":"Honda Civic Sedan (12-15): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda Civic Sedan:::2012-2015|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991681164,"sku":"EDC01166","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_ef75927a-05fa-4c11-a981-1eae65c6626e.jpg?v=1750297995"},{"product_id":"honda-cbr-1000rr-06-07-profile-prism-fitted-halos-kit","title":"Honda CBR-1000RR (06-07): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda CBR-1000RR:::2006-2007|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991713932,"sku":"EDC01167","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_cf1673ff-87ff-469f-a596-9c68a7e10c4f.jpg?v=1750297994"},{"product_id":"honda-cbr-600rr-07-12-profile-prism-fitted-halos-kit","title":"Honda CBR-600RR (07-12): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda CBR-600RR:::2007-2012|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991746700,"sku":"EDC01168","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_00dd20af-2a99-429a-a49e-bd1a8e903cb7.jpg?v=1750297993"},{"product_id":"honda-cbr-1000rr-08-11-profile-prism-fitted-halos-kit","title":"Honda CBR-1000RR (08-11): Profile Prism Fitted Halos (Kit)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to Fitted LED Halos. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old, Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. The vehicle-specific halo kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white, as well as an amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTech Specs: \u003c\/strong\u003eMODES:::Strobe, Flash, Fade|PRIMARY FUNCTION:::RGB|LIGHT SOURCE:::Proprietary SMD LED|EXPECTED LIFESPAN:::50,000 hours|PCB WIDTH:::7mm|PCB THICKNESS:::3mm|DRIVER HOUSING:::Anodized AL|DRIVER PROTECTION:::Full internal Potting|COLOR WHEN OFF:::Neutral White|CONNECTIONS:::JST 4 Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's Included: \u003c\/strong\u003eFITTED HALOS:::Profile Prism Vehicle-Specific Kit (RGB)|DRIVERS:::2x Prism|OPTIONAL CONTROLLER:::1x XBT Bluetooth or PrismPilot|WARRANTY:::3 Years|NOTE:::COMPLETE HEADLIGHTS NOT INCLUDED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eHonda CBR-1000RR:::2008-2011|Input:::12V +\/-|RGB Controllers:::XBT Bluetooth (Recommended), Profile PrismPilot RF, or any 4-Wire RGBW+|Note:::Fog light kits cannot be used with Halogen or HID Bulbs (voids warranty)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Profile","offers":[{"title":"Default Title","offer_id":34135991779468,"sku":"EDC01169","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_37a2e74d-d8dc-4a0d-aa3e-931e7598af78.jpg?v=1750297992"},{"product_id":"black-series-to-g5-brackets-civic-altima-maxima","title":"Black Series to G5 Projector Retrofit Brackets (Civic \/ Altima \/Maxima\/SRX)","description":"\u003cp\u003eRetrofit your \u003cb\u003eBlack Series \u003c\/b\u003eprojector equipped vehicle with a stainless steel, laser-cut bracket. HID or LED projectors are compatible. \u003c\/p\u003e\n\u003cp\u003eThese brackets replicate the factory mounting points allowing for a no hassle installation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x Black Series to G5 Brackets (Civic, Altima, Maxima)\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eConfirmed Fitments:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2013-2018 Nissan Altima\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2009-2018 Nissan Maxima\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e10th Gen Honda Civic 2016+\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eCadillac SRX D2S 5.0 \/ G5 Brackets (Non-AFS Version)\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":34433165262988,"sku":"B0112","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DSC_3980F_7a7904c1-befd-4c9b-9395-dc6b82fe46a6.jpg?v=1652983962"},{"product_id":"4gtl-to-g5-brackets-honda","title":"4GTL to G5 Projector Retrofit Brackets (Honda) 4TLR","description":"\u003cp\u003eRetrofit your 4GTL projector\u003cstrong\u003e \u003c\/strong\u003eequipped Honda vehicle to any projector using the G5 bolt pattern; MLED 2.0 included! \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 4GTL to G5 Brackets (Honda Version)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed Fitments:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda Headlights with \"4GTL\" (4th Gen TL) Bolt Pattern 4TLR\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda CR-V 2017-2020\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda Accord 2013-2017\u003c\/span\u003e\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":39351509385356,"sku":"B035","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/IMG_19601.jpg?v=1620249360"},{"product_id":"mws_apo_1_g2_honda-civic-sedan-06-08-profile-prism-fitted-halos-kit","title":"Honda Civic Sedan (06-08): Profile Prism Fitted Halos (Kit)","description":"PLEASE DO NOT MODIFY!\u003cbr\u003eIT IS A SERVICE PRODUCT AUTO-GENERATED BY MAGEWORX APO PRODUCT OPTIONS APP.","brand":"Profile","offers":[{"title":"Default Title #MWS Options 1","offer_id":44782557888652,"sku":"EDC01159","price":349.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/media_58c7a08c-a651-43e8-9deb-00cea8b4642f.jpg?v=1750298006"},{"product_id":"3g-acura-tl-to-g5-brackets","title":"3G Acura TL to G5 Brackets 2004-2008","description":"\u003cp\u003eFinally, a proper upgrade option for the 3rd Gen Acura TL. Your choice of Bi-Xenon or Bi-LED projectors that will allow you to bolt them up to your factory TL headlights. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eConfidence:\u003c\/b\u003e Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won't regret it!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eWHATS INCLUDED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2x 3G TL to G5 Brackets \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed Fitments:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eAcura TL 2004- 2008 3rd Gen TL\u003c\/p\u003e","brand":"Lightwerkz Global Inc","offers":[{"title":"Default Title","offer_id":49906365137036,"sku":"BJ376","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/files\/Untitleddesign_64_245801bf-6e6d-4bdd-9b71-69b793d01156.png?v=1778852596"}],"url":"https:\/\/lightwerkz.net\/en-au\/collections\/honda\/led-halos-strips.oembed","provider":"Lightwerkz Global Inc","version":"1.0","type":"link"}