Morimoto Switched Power Harness: 6x Outputs (Extended)
-
FREE SHIPPING
*EXCLUSIONS APPLY -
FAST
ORDER PROCESSING -
HASSLE-FREE
WARRANTY & RETURNS
Power Up: The Morimoto 4Banger LED Pods have been developed from the ground up to set a new standard in their segment, and the same goes for the wiring. If you want the best, bingo. If you want cheap, you'll want to look for an alternative (and sadly, that wont be hard to find -- because until now, everybody has overlooked the importance of quality cables). OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple sealed proprietary 4-pin relays with dual-hanger. Proprietary over-molded inline fuse holder with 40A ATO fuse. DT06-2S female outputs with dual seals. Stainless steel power and ground terminals. Proprietary M-Spec push button switch with Yellow-LED backlight. Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery for up to six off road lights. Every line of the beefy 10 AWG copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing. Plug n Play: The connections on the harness have been laid out in a logical way to power up to three LED pods on each side of your vehicle. There are six total deutsch outputs. A positive battery terminal, and ground terminal, and a switch. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. Compatible: While this harness is a perfect match for the Morimoto 4Banger LED pods on the 2021+ Ford Bronco, you can make good use of it with any other off-road lighting setup that takes a DT-style two-pin input (which is basically the industry standard).
Tech Specs:
- Relays: 2x Triple-Sealed 40A M-Spec
- Input: Bare Wire (Upfitter Switch input)
- Outputs: 6x Deutsch DT 2-Pin Female
- Main Input: 12V+/- Battery Ring Terminals (8.5mm ID / 15mm OD)
- Wiring: 10AWG-18AWG Copper Stranded
- Insulation: Black Tech Flex Braided Mesh
What's Included:
- Harness: 1x Morimoto Six Pod Power Harness
- Switch: Controlled by Vehicle Auxiliary Switch
- Warranty: Five (5) Years
Compatibility:
- Morimoto Pods: 1Banger, 2Banger, and 4Banger
- Other Pods: With Deutsch DT 2-Pin inputs
- BangerBar System: Yes
- Pod Quantity: 6
Power Up: The Morimoto 4Banger LED Pods have been developed from the ground up to set a new standard in their segment, and the same goes for the wiring. If you want the best, bingo. If you want cheap, you'll want to look for an alternative (and sadly, that wont be hard to find -- because until now, everybody has overlooked the importance of quality cables). OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple sealed proprietary 4-pin relays with dual-hanger. Proprietary over-molded inline fuse holder with 40A ATO fuse. DT06-2S female outputs with dual seals. Stainless steel power and ground terminals. Proprietary M-Spec push button switch with Yellow-LED backlight. Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery for up to six off road lights. Every line of the beefy 10 AWG copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing. Plug n Play: The connections on the harness have been laid out in a logical way to power up to three LED pods on each side of your vehicle. There are six total deutsch outputs. A positive battery terminal, and ground terminal, and a switch. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. Compatible: While this harness is a perfect match for the Morimoto 4Banger LED pods on the 2021+ Ford Bronco, you can make good use of it with any other off-road lighting setup that takes a DT-style two-pin input (which is basically the industry standard).
Tech Specs:
- Relays: 2x Triple-Sealed 40A M-Spec
- Input: Bare Wire (Upfitter Switch input)
- Outputs: 6x Deutsch DT 2-Pin Female
- Main Input: 12V+/- Battery Ring Terminals (8.5mm ID / 15mm OD)
- Wiring: 10AWG-18AWG Copper Stranded
- Insulation: Black Tech Flex Braided Mesh
What's Included:
- Harness: 1x Morimoto Six Pod Power Harness
- Switch: Controlled by Vehicle Auxiliary Switch
- Warranty: Five (5) Years
Compatibility:
- Morimoto Pods: 1Banger, 2Banger, and 4Banger
- Other Pods: With Deutsch DT 2-Pin inputs
- BangerBar System: Yes
- Pod Quantity: 6
What is your shipping cutoff time?
Cutoff time is 1pm EST. Assuming we have all your parts in stock, the order should ship the same day. If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product.
Will I receive a tracking number?
Of course! As soon as your order is shipped you will receive a tracking notification through email. You can also always log into your account and check the tracking information on the order.
Is shipping free?
Orders over $99 qualify for free shipping within the contiguous United States. *Services are excluded from free shipping. We will chose the most economic method. If you need a product as quickly as possible, always best to chose an expedited shipping option.
Return Window
We allow up to 90 days from the original purchase date to return your item for an exchange or store credit. If you wish to return the product for a refund, we allow up to 45 days from the original purchase date.
Shipping
Customers are responsible for return shipping costs, unless of course we made an error when we shipped out the order. Please contact us if an error was made, we can send over a return label to the email address on file to begin the exchange process.
Refunds/Store Credit
Please be advised that any free shipping promotions used on the original order will be forfeited if the order is returned and the original shipping costs (paid or unpaid) will also be deducted from the refundable amount. Refunds can only be processed to the original payment method. Store credit will be sent through an email gift card, which you can apply to your next order with us.
Our standard restocking fee structure is outlined below. Please refer to our exchange and refund policies for important timelines.
Tier 1: Perfect condition. (Unopened & like-new) = 90% refund or 100% store credit.
Tier 2: Re-conditionable. (Packaging opened or damaged) = 80% refund or 90% store credit.
Tier 3: Inability to restock. (Product & packaging both damaged) = 70% refund or 80% store credit.
Exclusions
If the part has been installed, and shows signs of use, we are unable to take the product back for an exchange or refund. Original Osram and Philips bulbs cannot be returned if the authenticity seal has been broken. Any special ordered item, such as a custom headlight conversion, is not eligible to be returned.
HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country.
Note: This usage regulation is not unique to products found on our website. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, click HERE.