{"title":"Vehicle Specific","description":"","products":[{"product_id":"motorsports-bracket-set-diode-dynamics","title":"Motorsports Bracket Set Diode Dynamics","description":"\u003cp\u003eDesigned for racing. The Motorsports LED Light Bar Kit from Diode Dynamics allows you to mount up to four SS12 Stage Series 12 Inch Light Bars or SS18 Stage Series 18 Inch Light Bar on the hood of your vehicle. The whole kit includes everything needed for installation and uses stainless steel hardware for long lasting durability, including custom-made stainless rubber bumpers, which absorb vibration and prevent any damage to the hood. These purpose-built brackets were CAD-designed to provide the performance you need to Go Faster, and See Further.\u003c\/p\u003e\n\u003cp\u003eFully customizable. With the modular design, you can adjust the setup and angling for your specific race conditions and preference. Each of the lightbars are adjustable in output angle and position, and you can also adjust the brackets themselves to align with the contour of your hood. The Stage Series lineup also allows you to swap out optics and amber or white colors, for any need. The light bar kit includes four Wide Clear lenses.\u003c\/p\u003e\n\u003cp\u003eA popular option is to aim the top bars straight ahead, and the lower bars angled more to the side. With the included lenses, you also have the option to convert the outer side of each bar to a Wide optic. This setup is common for a stage with a lot of R1s and L1s, and any off-camber turns, to fill in light where you need it. For the straights, we recommend keeping most of the bars in the Driving optic, which is a focused, but not pencil-beam pattern, to punch far ahead while not blowing out your vision with too much foreground light.\u003c\/p\u003e\n\u003cp\u003eQuick mounting for night stages. This kit utilizes Dzus sliding latch fasteners to mount the setup to your vehicle. These provide reliable, strong attachment, while still offering quick installation for night stages. You'll just need to install them to the hood with a few rivets, and you'll be able to throw your lightbars on within seconds during service.\u003c\/p\u003e\n\u003cp\u003eDesigned For Performance. Designed from the start for competition racing, and more specifically night stage rally races, Diode Dynamics Stage Series light bars have been engineered for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRally-designed light bar mounting solution\u003c\/li\u003e\n\u003cli\u003eMount up to four 12 Inch or 18 Inch Stage Series light bars\u003c\/li\u003e\n\u003cli\u003eFully customizable, adjust light bar angle and position\u003c\/li\u003e\n\u003cli\u003eAligns to hood contour\u003c\/li\u003e\n\u003cli\u003eQuick release mounts for night stages with DZUS sliding lock fasteners\u003c\/li\u003e\n\u003cli\u003eHighly durable 12 gauge powdercoated steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003cbr\u003eBrackets Only:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull bracket set\u003c\/li\u003e\n\u003cli\u003eEight (8) 8-32 Inch Stainless Steel Hex Nuts\u003c\/li\u003e\n\u003cli\u003eFour (4) 8-32 Inch Stainless Steel Hex Screws\u003c\/li\u003e\n\u003cli\u003eEight (8) Dzus 1500 Series Spacers\u003c\/li\u003e\n\u003cli\u003eEight (8) M6 Custom-Designed Bumper Feet\u003c\/li\u003e\n\u003cli\u003eTwenty-four (24) M6 Stainless Steel Flange Bolts\u003c\/li\u003e\n\u003cli\u003eTwenty-four (24) M6 Stainless Steel Flange Nuts\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Full Set (Four total)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBracket Thickness: 12 ga\u003c\/li\u003e\n\u003cli\u003eMaterials: Polycarbonate Lens, Aluminum Heatsink, Powdercoated Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127388876940,"sku":"DD6076","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6076-GBFG_7b1cdbb9-c20d-47cd-8515-463424d552c0.jpg?v=1749011633"},{"product_id":"outer-lens-for-stage-series-flood-amber-diode-dynamics","title":"Outer Lens for Stage Series Flood Amber Diode Dynamics","description":"\u003cp\u003eThis is one clear polycarbonate outer lens for Stage Series LED light bars.\u003c\/p\u003e\n\u003cp\u003eIt can be used to change the performance and output pattern of your Stage Series Light Bar.\u003c\/p\u003e\n\u003cp\u003eThe installation process is straightforward, but must be completed at your own risk. It requires removing the frame using a 2mm hex driver bit (not included), removing the original lens, removing the O-ring from the lens, placing the O-ring onto the new lens, placing it in position, and securing the frame back into place. We recommend finding a clean area, wearing protective gloves, and taking your time. Do not overtighten screws.\u003c\/p\u003e\n\u003cp\u003eNote: If you choose to change the lens yourself, any warranty claim for moisture or condensation will require the light bar to be returned to our facility for repair, rather than direct replacement.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Pattern Flood\u003c\/li\u003e\n\u003cli\u003eLens Color: Amber\u003c\/li\u003e\n\u003cli\u003eLens Material: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eSeries: Stage Series\u003c\/li\u003e\n\u003cli\u003eBar Type Single Row\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127403425932,"sku":"DD6031","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6031-GBFG_77ed16da-80a0-4d91-910d-a349073396f8.jpg?v=1749011619"},{"product_id":"outer-lens-for-stage-series-flood-clear-diode-dynamics","title":"Outer Lens for Stage Series Flood Clear Diode Dynamics","description":"\u003cp\u003eThis is one clear polycarbonate outer lens for Stage Series LED light bars.\u003c\/p\u003e\n\u003cp\u003eIt can be used to change the performance and output pattern of your Stage Series Light Bar.\u003c\/p\u003e\n\u003cp\u003eThe installation process is straightforward, but must be completed at your own risk. It requires removing the frame using a 2mm hex driver bit (not included), removing the original lens, removing the O-ring from the lens, placing the O-ring onto the new lens, placing it in position, and securing the frame back into place. We recommend finding a clean area, wearing protective gloves, and taking your time. Do not overtighten screws.\u003c\/p\u003e\n\u003cp\u003eNote: If you choose to change the lens yourself, any warranty claim for moisture or condensation will require the light bar to be returned to our facility for repair, rather than direct replacement.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Pattern Flood\u003c\/li\u003e\n\u003cli\u003eLens Color: Clear\u003c\/li\u003e\n\u003cli\u003eLens Material: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eSeries: Stage Series\u003c\/li\u003e\n\u003cli\u003eBar Type Single Row\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127404146828,"sku":"DD6030","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6030-GBFG_772a649d-1c5e-42a7-9cde-7416b10950bd.jpg?v=1749011618"},{"product_id":"jeep-2018-ss30-bumper-bracket-kit-diode-dynamics","title":"SS30 Bumper Bracket Kit for 2018-2021 Jeep JL Wrangler\/Gladiator","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fitment on 2020-2023 Jeep Gladiator.\u003c\/li\u003e\n\u003cli\u003eCAD-designed for perfect fitment and OEM-like appearance.\u003c\/li\u003e\n\u003cli\u003eHighly durable powdercoated steel construction.\u003c\/li\u003e\n\u003cli\u003eUtilizes existing mounting points and hardware for a simple installation.\u003c\/li\u003e\n\u003cli\u003eControl through factory aux switch bank using the included harness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e The Bumper LED Light Bar Kit compatible with Jeep Gladiator 2020-2023 from Diode Dynamics allows you to mount either a single SS30 Stage Series 30 Inch LED Light Bar or dual Stage Series 30 Inch LED Light Bars on the factory front bumper. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your look. \u003c\/strong\u003eThis kit can be mounted in different ways to achieve the look you're after! Mount a single light bar using the base brackets  or use the included extension brackets to allow clearance for a winch or mount a second light bar for maximum light output. The brackets  without the light bars or harnesses  are available separately and are compatible with any generic 30 Inch LED light bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl through aux switch bank.\u003c\/strong\u003e Included with the kit is our new OEM Auxiliary Switch Dual-Output Wiring Harness. This harness allows you to control your LED light bars using the factory-installed aux switch bank. For those who don't have the aux switch bank  our Heavy Duty Dual-Output Wiring Harness is also included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Application-specific heavy duty steel brackets for installation on 2018-2023 Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003eTwo (2) Extension brackets\u003c\/li\u003e\n\u003cli\u003eOne (1) or Two (2) SS30 Stage Series 30 Inch Light Bars\u003c\/li\u003e\n\u003cli\u003eOne (1) Heavy-Duty Single Output Harness\u003c\/li\u003e\n\u003cli\u003eOne (1) Heavy Duty Dual-Output Harness\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncluded in the box:\n\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo (2) Application-specific heavy-duty steel brackets for installation on 2018+ Jeep Wrangler\u003c\/li\u003e\n\u003cli\u003eTwo (2) Extension brackets\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127404540044,"sku":"DD6027","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6027-GBFG_ea441280-1921-492a-b551-3fd7975678ed.jpg?v=1749011617"},{"product_id":"outer-lens-for-stage-series-wide-amber-diode-dynamics","title":"Outer Lens for Stage Series Wide Amber Diode Dynamics","description":"\u003cp\u003eThis is one clear polycarbonate outer lens for Stage Series LED light bars.\u003c\/p\u003e\n\u003cp\u003eIt can be used to change the performance and output pattern of your Stage Series Light Bar.\u003c\/p\u003e\n\u003cp\u003eThe installation process is straightforward, but must be completed at your own risk. It requires removing the frame using a 2mm hex driver bit (not included), removing the original lens, removing the O-ring from the lens, placing the O-ring onto the new lens, placing it in position, and securing the frame back into place. We recommend finding a clean area, wearing protective gloves, and taking your time. Do not overtighten screws.\u003c\/p\u003e\n\u003cp\u003eNote: If you choose to change the lens yourself, any warranty claim for moisture or condensation will require the light bar to be returned to our facility for repair, rather than direct replacement.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Pattern Wide\u003c\/li\u003e\n\u003cli\u003eLens Color: Amber\u003c\/li\u003e\n\u003cli\u003eLens Material: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eSeries: Stage Series\u003c\/li\u003e\n\u003cli\u003eBar Type Single Row\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127404966028,"sku":"DD6026","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6026-GBFG_f350aa9f-20d9-4c14-aefb-fc4b93b66d61.jpg?v=1749011616"},{"product_id":"outer-lens-for-stage-series-driving-amber-diode-dynamics","title":"Outer Lens for Stage Series Driving Amber Diode Dynamics","description":"\u003cp\u003eThis is one clear polycarbonate outer lens for Stage Series LED light bars.\u003c\/p\u003e\n\u003cp\u003eIt can be used to change the performance and output pattern of your Stage Series Light Bar.\u003c\/p\u003e\n\u003cp\u003eThe installation process is straightforward, but must be completed at your own risk. It requires removing the frame using a 2mm hex driver bit (not included), removing the original lens, removing the O-ring from the lens, placing the O-ring onto the new lens, placing it in position, and securing the frame back into place. We recommend finding a clean area, wearing protective gloves, and taking your time. Do not overtighten screws.\u003c\/p\u003e\n\u003cp\u003eNote: If you choose to change the lens yourself, any warranty claim for moisture or condensation will require the light bar to be returned to our facility for repair, rather than direct replacement.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Pattern Driving\u003c\/li\u003e\n\u003cli\u003eLens Color: Amber\u003c\/li\u003e\n\u003cli\u003eLens Material: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eSeries: Stage Series\u003c\/li\u003e\n\u003cli\u003eBar Type Single Row\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127405195404,"sku":"DD6025","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6025-GBFG_a7fc1c9f-380c-4374-b66e-5794e9ec46b2.jpg?v=1749011615"},{"product_id":"outer-lens-for-stage-series-wide-clear-diode-dynamics","title":"Outer Lens for Stage Series Wide Clear Diode Dynamics","description":"\u003cp\u003eThis is one clear polycarbonate outer lens for Stage Series LED light bars.\u003c\/p\u003e\n\u003cp\u003eIt can be used to change the performance and output pattern of your Stage Series Light Bar.\u003c\/p\u003e\n\u003cp\u003eThe installation process is straightforward, but must be completed at your own risk. It requires removing the frame using a 2mm hex driver bit (not included), removing the original lens, removing the O-ring from the lens, placing the O-ring onto the new lens, placing it in position, and securing the frame back into place. We recommend finding a clean area, wearing protective gloves, and taking your time. Do not overtighten screws.\u003c\/p\u003e\n\u003cp\u003eNote: If you choose to change the lens yourself, any warranty claim for moisture or condensation will require the light bar to be returned to our facility for repair, rather than direct replacement.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Pattern Wide\u003c\/li\u003e\n\u003cli\u003eLens Color: Clear\u003c\/li\u003e\n\u003cli\u003eLens Material: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eSeries: Stage Series\u003c\/li\u003e\n\u003cli\u003eBar Type Single Row\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127405457548,"sku":"DD6024","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6024-GBFG_164ecd7d-dcee-4327-8564-9c2cbce6f85b.jpg?v=1749011614"},{"product_id":"outer-lens-for-stage-series-driving-clear-diode-dynamics","title":"Outer Lens for Stage Series Driving Clear Diode Dynamics","description":"\u003cp\u003eThis is one clear polycarbonate outer lens for Stage Series LED light bars.\u003c\/p\u003e\n\u003cp\u003eIt can be used to change the performance and output pattern of your Stage Series Light Bar.\u003c\/p\u003e\n\u003cp\u003eThe installation process is straightforward, but must be completed at your own risk. It requires removing the frame using a 2mm hex driver bit (not included), removing the original lens, removing the O-ring from the lens, placing the O-ring onto the new lens, placing it in position, and securing the frame back into place. We recommend finding a clean area, wearing protective gloves, and taking your time. Do not overtighten screws.\u003c\/p\u003e\n\u003cp\u003eNote: If you choose to change the lens yourself, any warranty claim for moisture or condensation will require the light bar to be returned to our facility for repair, rather than direct replacement.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Pattern Driving\u003c\/li\u003e\n\u003cli\u003eLens Color: Clear\u003c\/li\u003e\n\u003cli\u003eLens Material: Polycarbonate\u003c\/li\u003e\n\u003cli\u003eSeries: Stage Series\u003c\/li\u003e\n\u003cli\u003eBar Type Single Row\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127405686924,"sku":"DD6023","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6023-GBFG_f048050e-5c45-4b87-b772-617c61258e17.jpg?v=1749011613"},{"product_id":"ram-2013-standard-stage-series-6-inch-kit-white-driving-diode-dynamics","title":"Ram 2013 Standard Stage Series 6 Inch Kit White Driving Diode Dynamics","description":"\u003cp\u003ePerfect Fitment. The LED Driving Light Kit for the 2013-2018 Dodge Ram with Standard bumper from Diode Dynamics allows you to mount a pair of SS6 Stage Series 6 Inch Light Bars in the bumper openings. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required!\u003c\/p\u003e\n\u003cp\u003eStreet Legal Output. This kit isn't just for off road! It is legal for on-road use as driving or fog lights (Please check your local laws and regulations for aiming, installation, and applicability).\u003c\/p\u003e\n\u003cp\u003eDesigned For Performance. Using optical simulation modeling, Diode Dynamics Stage Series light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.\u003c\/p\u003e\n\u003cp\u003eFunctional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.\u003c\/li\u003e\n\u003cli\u003eThe Wide pattern provides an extremely wide field of view, without wasting any light in the sky above and provides a 100Wx8H degree spread of light. It was designed to supplement your fog lights and is perfect for driving in inclement weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBar Type Two (2) Single Row Straight\u003c\/li\u003e\n\u003cli\u003eBar Length 6 Inch\u003c\/li\u003e\n\u003cli\u003eLens Color Clear\u003c\/li\u003e\n\u003cli\u003eLight Pattern Driving\u003c\/li\u003e\n\u003cli\u003eLux 550\u003c\/li\u003e\n\u003cli\u003eBrackets Inluded Yes\u003c\/li\u003e\n\u003cli\u003eDirect fitment on 2013-2018 Dodge Ram Standard\u003c\/li\u003e\n\u003cli\u003eStreet-legal output as Driving or Fog lights (Please check your local laws and regulations for aiming, installation, and applicability)\u003c\/li\u003e\n\u003cli\u003eDual output wiring harness included.\u003c\/li\u003e\n\u003cli\u003eHighly durable powdercoated steel construction\u003c\/li\u003e\n\u003cli\u003eUtilizes existing mounting points and hardware for a simple installation\u003c\/li\u003e\n\u003cli\u003eCAD-designed for perfect fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Application-specific heavy-duty steel brackets for installation on 2013-2018 Ram Standard\u003c\/li\u003e\n\u003cli\u003eTwo (2) SS6 Stage Series 6 Inch Light Bars\u003c\/li\u003e\n\u003cli\u003eOne (1) Dual Output Harness with toggle switch\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Pair (Left and Right Side)\u003c\/li\u003e\n\u003cli\u003eWarranty: 8 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit was designed for the 2013-2018 Ram with the Standard bumper\u003c\/li\u003e\n\u003cli\u003eMake: Ram Model: 1500\/2500\/3500\u003c\/li\u003e\n\u003cli\u003eYears: 2013, 2014, 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eElectrical Compatibility: No electrical issues (tested and confirmed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasured Lumens: 2280\u003c\/li\u003e\n\u003cli\u003eIntensity (cd): 47,000\u003c\/li\u003e\n\u003cli\u003eColor Temp (CCT): 2000K, 6000K\u003c\/li\u003e\n\u003cli\u003eBeam Angle: Wide, 100 Degree x8 Degree, Driving, 20 Degree x8 Degree\u003c\/li\u003e\n\u003cli\u003ePower (watts): 26.6\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eCurrent (amps at 13.2V): 1.9\u003c\/li\u003e\n\u003cli\u003eBracket Thickness: 14 ga\u003c\/li\u003e\n\u003cli\u003ePolarity: Polarity Specific\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eLED Emitter: Luxeon Z ES\u003c\/li\u003e\n\u003cli\u003eConnector(s): Deutsch DT Input\u003c\/li\u003e\n\u003cli\u003eMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink\u003c\/li\u003e\n\u003cli\u003eCooling: Passive, heatsink\u003c\/li\u003e\n\u003cli\u003eIntrusion Ratings: IP68 Waterproof\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127406866572,"sku":"DD6012","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6012-GBFG_c6f649d4-411c-41ec-abd1-4416ab38f2e8.jpg?v=1749011610"},{"product_id":"wrx-2015-ss6-led-kit-white-driving-diode-dynamics","title":"WRX 2015 SS6 LED Kit White Driving Diode Dynamics","description":"\u003cp\u003ePerfect Fitment. The LED Driving Light Kit for the 2015-2017 Subaru WRX from Diode Dynamics allows you to mount a pair of SS6 Stage Series 6 Inch Light Bars behind the factory grille. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required!\u003c\/p\u003e\n\u003cp\u003eStreet Legal Output. This kit isn't just for off road! It is legal for on-road use as driving lights (Please check your local laws and regulations for aiming, installation, and applicability). With the included plug-and-play wiring harness, you can control the kit through your toggle switch.\u003c\/p\u003e\n\u003cp\u003eDesigned For Performance. Using optical simulation modeling, Diode Dynamics Stage Series light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market.\u003c\/p\u003e\n\u003cp\u003eFunctional Patterns. All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Driving pattern was designed to supplement your high beams. Rather than a simple spot pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.\u003c\/li\u003e\n\u003cli\u003eThe Wide pattern provides an extremely wide field of view, without wasting any light in the sky above and provides a 100Wx8H degree spread of light. It was designed to supplement your fog lights and is perfect for driving in inclement weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eBar Type One (1) Single Row Straight\u003c\/li\u003e\n\u003cli\u003eBar Length 6 Inch\u003c\/li\u003e\n\u003cli\u003eLens Color Clear\u003c\/li\u003e\n\u003cli\u003eLight Pattern Driving\u003c\/li\u003e\n\u003cli\u003eLux 550\u003c\/li\u003e\n\u003cli\u003eBrackets Inluded Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026gt;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fitment on 2015-2017 Subaru WRX\/STi\u003c\/li\u003e\n\u003cli\u003eStreet-legal output as Driving lights (Please check your local laws and regulations for aiming, installation, and applicability)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play wiring harness included to control through toggle switch.\u003c\/li\u003e\n\u003cli\u003eHighly durable powdercoated steel construction\u003c\/li\u003e\n\u003cli\u003eUtilizes existing mounting points and hardware for a simple installation\u003c\/li\u003e\n\u003cli\u003eCAD-designed for perfect fitment\u003c\/li\u003e\n\u003cli\u003eInstallation Info\u003c\/li\u003e\n\u003cli\u003eUses existing mounting points behind grille, no mounting modification needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree (3) Application-specific heavy-duty steel brackets for installation on 2015-2017 Subaru WRX\/STi\u003c\/li\u003e\n\u003cli\u003eTwo (2) SS6 Stage Series 6 Inch Light Bars\u003c\/li\u003e\n\u003cli\u003eOne (1) Wiring Harness to connect to toggle switch\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003cli\u003eWarranty: 8 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is not compatible with Hella Horns, as they use the same mounting points.\u003c\/li\u003e\n\u003cli\u003eMake: Subaru\u003c\/li\u003e\n\u003cli\u003eModel: WRX\/STi\u003c\/li\u003e\n\u003cli\u003eYears: 2015, 2016, 2017\u003c\/li\u003e\n\u003cli\u003eElectrical Compatibility: No electrical issues (tested and confirmed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasured Lumens: 2280\u003c\/li\u003e\n\u003cli\u003eIntensity (cd): 47,000\u003c\/li\u003e\n\u003cli\u003eColor Temp (CCT): 2000K, 6000K\u003c\/li\u003e\n\u003cli\u003eBeam Angle: Wide, 100 Degree x8 Degree, Driving, 20 Degree x8 Degree\u003c\/li\u003e\n\u003cli\u003ePower (watts): 26.6\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 9-24V\u003c\/li\u003e\n\u003cli\u003eCurrent (amps at 13.2V): 1.9\u003c\/li\u003e\n\u003cli\u003eBracket Thickness: 12 ga\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eLED Emitter: Luxeon Z ES\u003c\/li\u003e\n\u003cli\u003eConnector(s): Deutsch DT Input\u003c\/li\u003e\n\u003cli\u003eMaterials: Aluminum PCB, Polycarbonate Lens, Aluminum Heatsink\u003c\/li\u003e\n\u003cli\u003eCooling: Passive, heatsink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127407227020,"sku":"DD6008","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6008-GBFG_e2e24f3a-190e-48f4-8ebb-4c61469ee236.jpg?v=1749011608"},{"product_id":"2017-raptor-fog-base-bracket-pair-diode-dynamics","title":"2017 Raptor Fog Base Bracket Pair Diode Dynamics","description":"\u003cp\u003ePerfect Fitment. The LED Fog Light Bar Bracket Kit for the 2017 and up Ford Raptor from Diode Dynamics allows you to mount auxiliary lighting in the factory bumper openings. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required!\u003c\/p\u003e\n\u003cp\u003eChoose Your Look. This kit allows you to mount either a pair of SS6 Stage Series 6 Inch Light Bars, a pair of SS12 Stage Series 12 Inch Light Bars, or up to three generic work lights or pods in the bumper openings.\u003c\/p\u003e\n\u003cp\u003eStreet Legal Output. This kit isn't just for off road! It is legal for on-road use as driving lights or fog lights (Please check your local laws and regulations for aiming, installation, and applicability).\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fitment on 2017 and Ford Raptor\u003c\/li\u003e\n\u003cli\u003eHighly durable powdercoated steel construction\u003c\/li\u003e\n\u003cli\u003eUtilizes existing mounting points and hardware for a simple installation\u003c\/li\u003e\n\u003cli\u003eCAD-designed for perfect fitment\u003c\/li\u003e\n\u003cli\u003eInstallation Info\u003c\/li\u003e\n\u003cli\u003eUses existing mounting points, no mounting modification needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets Only:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Application-specific brackets for installation on 2017-2019 Ford Raptor\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Fog Light\u003c\/li\u003e\n\u003cli\u003eMake: Ford\u003c\/li\u003e\n\u003cli\u003eModel: Raptor\u003c\/li\u003e\n\u003cli\u003eYears: 2017, 2018, 2019\u003c\/li\u003e\n\u003cli\u003eElectrical Compatibility: No electrical issues (tested and confirmed)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127408013452,"sku":"DD6003","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6003-GBFG_78f0ceae-f2ce-4795-b2c9-634df9832731.jpg?v=1749011598"},{"product_id":"stage-series-6-inch-u-bracket-single-diode-dynamics","title":"Stage Series 6 Inch U Bracket Single Diode Dynamics","description":"\u003cp\u003eCustom mount your 6 inch light bar. These U-brackets are designed for use with our 6-inch Stage Series Light Bars, offering an alternative mounting method for custom installations. See images for exact dimensions.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds one 6-inch Stage Series Lightbar\u003c\/li\u003e\n\u003cli\u003eHighly durable powdercoated steel construction\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting points\u003c\/li\u003e\n\u003cli\u003eIncludes a serrated steel nut and bolt set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) 6 Inch U bracket\u003c\/li\u003e\n\u003cli\u003eOne (1) serrated steel nut and bolt set\u003c\/li\u003e\n\u003cli\u003eQuantity: Single\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis U bracket is compatible with all SS6 Stage Series 6 Inch Light Bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBracket Thickness: 10 ga\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: No\u003c\/li\u003e\n\u003cli\u003eMaterials: Powdercoated Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127408046220,"sku":"DD6001S","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6001S-GBFG_12fd5c32-a8e8-4bd9-b57f-63c99792ca49.jpg?v=1749011598"},{"product_id":"stage-series-6-inch-u-bracket-pair-diode-dynamics","title":"Stage Series 6 Inch U Bracket Pair Diode Dynamics","description":"\u003cp\u003eCustom mount your 6 inch light bar. These U-brackets are designed for use with our 6-inch Stage Series Light Bars, offering an alternative mounting method for custom installations. See images for exact dimensions.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds one 6-inch Stage Series Lightbar\u003c\/li\u003e\n\u003cli\u003eHighly durable powdercoated steel construction\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting points\u003c\/li\u003e\n\u003cli\u003eIncludes a serrated steel nut and bolt set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) 6 Inch U brackets\u003c\/li\u003e\n\u003cli\u003eOne (1) serrated steel nut and bolt set\u003c\/li\u003e\n\u003cli\u003eQuantity: Pair\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis U bracket is compatible with all SS6 Stage Series 6 Inch Light Bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBracket Thickness: 10 ga\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: No\u003c\/li\u003e\n\u003cli\u003eMaterials: Powdercoated Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127408537740,"sku":"DD6001P","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD6001P-GBFG_39886129-5189-45b8-8d46-83324e15830d.jpg?v=1749011597"},{"product_id":"mustang-2015-eu-led-sidemarkers-smoked-set-diode-dynamics","title":"LED Sidemarkers for 2015-2021 EU\/AU Ford Mustang, Smoked (pair)","description":"\u003cp\u003eUpgraded Styling. If you're looking to give your Mustang an upgrade in styling and appearance, this is the perfect way to do it! These replacement units are loaded with hundreds of LEDs, for a modern and unique appearance. With the full LED array, they illuminate brighter than factory as well! Choose from three lens color options to match your vehicle or preference.\u003c\/p\u003e\n\u003cp\u003eOEM Grade. Unlike other sidemarkers on the market, Diode Dynamics lamps use OEM-grade retroreflector optics, which provide required the reflective safety and a clean, premium appearance when off, unlike diffuser or plain flat lenses without any reflective features. The units themselves are designed directly from OEM CAD data for a perfect fit, and the connector plugs right into the factory socket.\u003c\/p\u003e\n\u003cp\u003eReliability. These LEDs are designed with newer constant-current circuitry and transient voltage protection. These features, found in factory-installed lighting components, protect the circuit over time, ensuring years of flicker-free performance.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll sidemarkers illuminate in bright red, but there's three colors of lenses. Choose the one that fits your style!\u003c\/li\u003e\n\u003cli\u003eRed Also called OEM, these match your original, and are DOT\/SAE compliant in both illumination and lens color.\u003c\/li\u003e\n\u003cli\u003eSmoked A dark appearance, great on black and grey vehicles.\u003c\/li\u003e\n\u003cli\u003eClear Blends nicely on white and silver. These are clear in color, but still have the retroreflector optics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLens Color Smoked\u003c\/li\u003e\n\u003cli\u003eModern LED replacements for factory sidemarkers\u003c\/li\u003e\n\u003cli\u003eIncreased output, with unique styling\u003c\/li\u003e\n\u003cli\u003eOEM-grade retroreflector optics\u003c\/li\u003e\n\u003cli\u003eAvailable in red, clear, or smoked lens options\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003ePower (watts): 2.3 Operating Voltage: 9-16V Current (amps at  13.2V): .18 Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Mini SMD Connector(s): OEM-Size Plug and Play Driver Features: Internal, Constant Current Materials: ABS Base, PMMA Lens\u003cbr\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) LED sidemarkers\u003c\/li\u003e\n\u003cli\u003eOne (1) wiring harness\u003c\/li\u003e\n\u003cli\u003eTwo (2) T-taps to tap the factory parking light signal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eMake: Ford Model: Mustang EU\/AU Years: 2015, 2016, 2017, 2018, 2019\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127409160332,"sku":"DD5073","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD5073-GBFG_aedcdff4-572d-42ee-92fe-538cc1532cab.jpg?v=1749011596"},{"product_id":"mustang-2015-eu-led-sidemarkers-red-set-diode-dynamics","title":"LED Sidemarkers for 2015-2021 EU\/AU Ford Mustang, Red (pair)","description":"\u003cp\u003eUpgraded Styling. If you're looking to give your Mustang an upgrade in styling and appearance, this is the perfect way to do it! These replacement units are loaded with hundreds of LEDs, for a modern and unique appearance. With the full LED array, they illuminate brighter than factory as well! Choose from three lens color options to match your vehicle or preference.\u003c\/p\u003e\n\u003cp\u003eOEM Grade. Unlike other sidemarkers on the market, Diode Dynamics lamps use OEM-grade retroreflector optics, which provide required the reflective safety and a clean, premium appearance when off, unlike diffuser or plain flat lenses without any reflective features. The units themselves are designed directly from OEM CAD data for a perfect fit, and the connector plugs right into the factory socket.\u003c\/p\u003e\n\u003cp\u003eReliability. These LEDs are designed with newer constant-current circuitry and transient voltage protection. These features, found in factory-installed lighting components, protect the circuit over time, ensuring years of flicker-free performance.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll sidemarkers illuminate in bright red, but there's three colors of lenses. Choose the one that fits your style!\u003c\/li\u003e\n\u003cli\u003eRed Also called OEM, these match your original, and are DOT\/SAE compliant in both illumination and lens color.\u003c\/li\u003e\n\u003cli\u003eSmoked A dark appearance, great on black and grey vehicles.\u003c\/li\u003e\n\u003cli\u003eClear Blends nicely on white and silver. These are clear in color, but still have the retroreflector optics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLens Color Ews\u003c\/li\u003e\n\u003cli\u003eModern LED replacements for factory sidemarkers\u003c\/li\u003e\n\u003cli\u003eIncreased output, with unique styling\u003c\/li\u003e\n\u003cli\u003eOEM-grade retroreflector optics\u003c\/li\u003e\n\u003cli\u003eAvailable in red, clear, or smoked lens options\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003ePower (watts): 2.3 Operating Voltage: 9-16V Current (amps at 13.2V): .18 Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Mini SMD Connector(s): OEM-Size Plug and Play Driver Features: Internal, Constant Current Materials: ABS Base, PMMA Lens\u003cbr\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) LED sidemarkers\u003c\/li\u003e\n\u003cli\u003eOne (1) wiring harness\u003c\/li\u003e\n\u003cli\u003eTwo (2) T-taps to tap the factory parking light signal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eMake: Ford Model: Mustang EU\/AU Years: 2015, 2016, 2017, 2018, 2019\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127409586316,"sku":"DD5072","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD5072-GBFG_5c83f247-8423-4f38-8846-ffb638c23d3e.jpg?v=1749011595"},{"product_id":"mustang-2015-eu-led-sidemarkers-clear-set-diode-dynamics","title":"LED Sidemarkers for 2015-2021 EU\/AU Ford Mustang, Clear (pair)","description":"\u003cp\u003eUpgraded Styling. If you're looking to give your Mustang an upgrade in styling and appearance, this is the perfect way to do it! These replacement units are loaded with hundreds of LEDs, for a modern and unique appearance. With the full LED array, they illuminate brighter than factory as well! Choose from three lens color options to match your vehicle or preference.\u003c\/p\u003e\n\u003cp\u003eOEM Grade. Unlike other sidemarkers on the market, Diode Dynamics lamps use OEM-grade retroreflector optics, which provide required the reflective safety and a clean, premium appearance when off, unlike diffuser or plain flat lenses without any reflective features. The units themselves are designed directly from OEM CAD data for a perfect fit, and the connector plugs right into the factory socket.\u003c\/p\u003e\n\u003cp\u003eReliability. These LEDs are designed with newer constant-current circuitry and transient voltage protection. These features, found in factory-installed lighting components, protect the circuit over time, ensuring years of flicker-free performance.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll sidemarkers illuminate in bright red, but there's three colors of lenses. Choose the one that fits your style!\u003c\/li\u003e\n\u003cli\u003eRed Also called OEM, these match your original, and are DOT\/SAE compliant in both illumination and lens color.\u003c\/li\u003e\n\u003cli\u003eSmoked A dark appearance, great on black and grey vehicles.\u003c\/li\u003e\n\u003cli\u003eClear Blends nicely on white and silver. These are clear in color, but still have the retroreflector optics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLens Color Clear\u003c\/li\u003e\n\u003cli\u003eModern LED replacements for factory sidemarkers\u003c\/li\u003e\n\u003cli\u003eIncreased output, with unique styling\u003c\/li\u003e\n\u003cli\u003eOEM-grade retroreflector optics\u003c\/li\u003e\n\u003cli\u003eAvailable in red, clear, or smoked lens options\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003ePower (watts): 2.3 Operating Voltage: 9-16V Current (amps at 13.2V): .18 Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Mini SMD Connector(s): OEM-Size Plug and Play Driver Features: Internal, Constant Current Materials: ABS Base, PMMA Lens\u003cbr\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) LED sidemarkers\u003c\/li\u003e\n\u003cli\u003eOne (1) wiring harness\u003c\/li\u003e\n\u003cli\u003eTwo (2) T-taps to tap the factory parking light signal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eMake: Ford Model: Mustang EU\/AU Years: 2015, 2016, 2017, 2018, 2019\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127410372748,"sku":"DD5071","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD5071-GBFG_4daddf74-745a-4ff1-b43c-1e622e6e7fd1.jpg?v=1749011594"},{"product_id":"mustang-2010-led-sidemarkers-smoked-set-diode-dynamics","title":"Mustang 2010 LED Sidemarkers Smoked Set Diode Dynamics","description":"\u003cp\u003eSet of Diode Dynamics Front and Rear Clear LED Side Marker Lights for all 2010, 2011, 2012, 2013 and 2014 Mustangs Are you looking to change the exterior appearance on your 2010-2014 Mustang? If so you might be interested in a Set of Diode Dynamics Front and Rear LED Side Marker Lights from CJ Pony Parts. The Set of LED Side Marker Lights are designed to be an exterior upgrade for all 2010, 2011, 2012, 2013 and 2014 Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe Front and Rear LEDs are available in a Clear, Amber or Smoked finish.\u003cbr\u003e\u003cstrong\u003eDiode Dynamics Front and Rear LED Side Marker Lights Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLens color Smoked\u003c\/li\u003e\n\u003cli\u003eModern LED Appearance\u003c\/li\u003e\n\u003cli\u003eRetroreflector Optic for OEM-Style Reflectivity\u003c\/li\u003e\n\u003cli\u003eInductive Driver Circuit for High Reliability\u003c\/li\u003e\n\u003cli\u003ePressure-Equalizing Vent Reduces Condensation\u003c\/li\u003e\n\u003cli\u003eA Complete Plug and Play Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Side Front LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003ePassenger Side Front LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003eDriver Side Rear LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003ePassenger Side Rear LED Side Marker Light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Set of Side Marker Lights from Diode Dynamics will provide a modern appearance on your 2010-2014 Mustang. The Side Markers have a retroreflector optic which will give your S197 Mustang a factory style look. A pressure vent is installed on the front and rear Side Markers. This will reduce on condensation build up. Installation is quick and hassle free due to the plug and play connectors. The LED Side Marker Lights are proudly made in the USA!\u003c\/p\u003e\n\u003cp\u003eFounded in 2006, Diode Dynamics manufactures LED lighting products for the automotive industry. Their main focus has been on developing great products that provide superior quality with excellent service. Whether you are looking for replacement LED bulbs, full LED assemblies, multicolor accents, or unique lighting control modules, look no further than the LED lighting products from Diode Dynamics!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePair (Left and Right Side)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127416107148,"sku":"DD5060","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD5060-GBFG.jpg?v=1749011588"},{"product_id":"mustang-2010-led-sidemarkers-amber-red-set-diode-dynamics","title":"Mustang 2010 LED Sidemarkers Amber\/Red Set Diode Dynamics","description":"\u003cp\u003eSet of Diode Dynamics Front and Rear Clear LED Side Marker Lights for all 2010, 2011, 2012, 2013 and 2014 Mustangs Are you looking to change the exterior appearance on your 2010-2014 Mustang? If so you might be interested in a Set of Diode Dynamics Front and Rear LED Side Marker Lights from CJ Pony Parts. The Set of LED Side Marker Lights are designed to be an exterior upgrade for all 2010, 2011, 2012, 2013 and 2014 Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe Front and Rear LEDs are available in a Clear, Amber or Smoked finish.\u003cbr\u003e\u003cstrong\u003eDiode Dynamics Front and Rear LED Side Marker Lights Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLens color Amber\/Red\u003c\/li\u003e\n\u003cli\u003eModern LED Appearance\u003c\/li\u003e\n\u003cli\u003eRetroreflector Optic for OEM-Style Reflectivity\u003c\/li\u003e\n\u003cli\u003eInductive Driver Circuit for High Reliability\u003c\/li\u003e\n\u003cli\u003ePressure-Equalizing Vent Reduces Condensation\u003c\/li\u003e\n\u003cli\u003eA Complete Plug and Play Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Side Front LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003ePassenger Side Front LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003eDriver Side Rear LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003ePassenger Side Rear LED Side Marker Light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Set of Side Marker Lights from Diode Dynamics will provide a modern appearance on your 2010-2014 Mustang. The Side Markers have a retroreflector optic which will give your S197 Mustang a factory style look. A pressure vent is installed on the front and rear Side Markers. This will reduce on condensation build up. Installation is quick and hassle free due to the plug and play connectors. The LED Side Marker Lights are proudly made in the USA!\u003c\/p\u003e\n\u003cp\u003eFounded in 2006, Diode Dynamics manufactures LED lighting products for the automotive industry. Their main focus has been on developing great products that provide superior quality with excellent service. Whether you are looking for replacement LED bulbs, full LED assemblies, multicolor accents, or unique lighting control modules, look no further than the LED lighting products from Diode Dynamics!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePair (Left and Right Side)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127417090188,"sku":"DD5059","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD5059-GBFG.jpg?v=1749011587"},{"product_id":"mustang-2010-led-sidemarkers-clear-set-diode-dynamics","title":"Mustang 2010 LED Sidemarkers Clear Set Diode Dynamics","description":"\u003cp\u003eSet of Diode Dynamics Front and Rear Clear LED Side Marker Lights for all 2010, 2011, 2012, 2013 and 2014 Mustangs Are you looking to change the exterior appearance on your 2010-2014 Mustang? If so you might be interested in a Set of Diode Dynamics Front and Rear LED Side Marker Lights from CJ Pony Parts. The Set of LED Side Marker Lights are designed to be an exterior upgrade for all 2010, 2011, 2012, 2013 and 2014 Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe Front and Rear LEDs are available in a Clear, Amber or Smoked finish.\u003cbr\u003e\u003cstrong\u003eDiode Dynamics Front and Rear LED Side Marker Lights Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLens color Clear\u003c\/li\u003e\n\u003cli\u003eModern LED Appearance\u003c\/li\u003e\n\u003cli\u003eRetroreflector Optic for OEM-Style Reflectivity\u003c\/li\u003e\n\u003cli\u003eInductive Driver Circuit for High Reliability\u003c\/li\u003e\n\u003cli\u003ePressure-Equalizing Vent Reduces Condensation\u003c\/li\u003e\n\u003cli\u003eA Complete Plug and Play Installation\u003c\/li\u003e\n\u003cli\u003eMade in the USA!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Side Front LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003ePassenger Side Front LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003eDriver Side Rear LED Side Marker Light\u003c\/li\u003e\n\u003cli\u003ePassenger Side Rear LED Side Marker Light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Set of Side Marker Lights from Diode Dynamics will provide a modern appearance on your 2010-2014 Mustang. The Side Markers have a retroreflector optic which will give your S197 Mustang a factory style look. A pressure vent is installed on the front and rear Side Markers. This will reduce on condensation build up. Installation is quick and hassle free due to the plug and play connectors. The LED Side Marker Lights are proudly made in the USA!\u003c\/p\u003e\n\u003cp\u003eFounded in 2006, Diode Dynamics manufactures LED lighting products for the automotive industry. Their main focus has been on developing great products that provide superior quality with excellent service. Whether you are looking for replacement LED bulbs, full LED assemblies, multicolor accents, or unique lighting control modules, look no further than the LED lighting products from Diode Dynamics!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Quantity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePair (Left and Right Side)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127417581708,"sku":"DD5058","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD5058-GBFG.jpg?v=1749011586"},{"product_id":"halo-lights-led-150mm-160mm-switchback-four-diode-dynamics","title":"Halo Lights LED 150mm\/160mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm\/160mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127464865932,"sku":"DD2279","price":274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2279-GBFG.jpg?v=1749011520"},{"product_id":"halo-lights-led-70mm-80mm-switchback-four-diode-dynamics","title":"Halo Lights LED 70mm\/80mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm\/80mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127465095308,"sku":"DD2276","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2276-GBFG.jpg?v=1749011519"},{"product_id":"halo-lights-led-90mm-120mm-switchback-four-diode-dynamics","title":"Halo Lights LED 90mm\/120mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm\/120mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127466602636,"sku":"DD2269","price":224.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2269-GBFG.jpg?v=1749011517"},{"product_id":"halo-lights-led-70mm-90mm-switchback-four-diode-dynamics","title":"Halo Lights LED 70mm\/90mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm\/90mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127467913356,"sku":"DD2264","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2264-GBFG.jpg?v=1749011516"},{"product_id":"halo-lights-led-120mm-switchback-four-diode-dynamics","title":"Halo Lights LED 120mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127469846668,"sku":"DD2249","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_5cad46e7-5171-4e66-8bd5-2eeee7b20565.jpg?v=1749011506"},{"product_id":"halo-lights-led-120mm-red-four-diode-dynamics","title":"Halo Lights LED 120mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127469977740,"sku":"DD2248","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2248-GBFG.jpg?v=1749011505"},{"product_id":"gmc-sierra-led-halos-switchback-16-18-sierra-1500-diode-dynamics","title":"GMC Sierra LED Halos Switchback 16-18 Sierra 1500 Diode Dynamics","description":"\u003cp\u003eTime for an upgrade! From the factory, the Sierra comes with a white C-shaped DRL that from certain angles can look segmented and distorted. Diode Dynamics is excited to release our HD LED Halos for the 2016-2018 GMC Sierra that provides a much brighter, more uniform appearance compared to the factory optics. These computer-designed LED Halos are circuit boards that align perfectly behind the factory diffusing reflector. Available in switchback and amber-only, both versions also function as an additional front turn signal for a custom, yet functional look!\u003c\/p\u003e\n\u003cp\u003eHigh output, clean appearance. The custom-designed LED modules replace the factory bulb or single LED, illuminating with a much higher intensity. With our proprietary high-density HDLED technology, these modules are populated with over 500 LED chips, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When it's off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003ePure white color. Assembled in USA, the modules light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white!\u003cbr\u003eConstant-current power.\u003c\/p\u003e\n\u003cp\u003eTo power the modules efficiently, your order includes two custom-designed drivers, which feature transient voltage suppression, reverse protection, and a switching driver for extremely high reliability over time. And here's what really makes this product shine over the competition: with an embedded microcontroller, the drivers utilize multi-stage PWM dimming, to allow for a half-brightness white, for use at night (parking lights), as well as a full-power white, for use as DRL during the day. Finally, the amber is run at even higher power, making the turn signal easily visible in broad daylight!\u003c\/p\u003e\n\u003cp\u003eProfessional installation is strongly recommended, as the factory headlights must be opened for installation. The halos must be custom-mounted in position using adhesive or beading wire.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e22016-2018 GMC Sierra LED Halos\u003c\/li\u003e\n\u003cli\u003eComputer-designed LED Halos for the 2016-2018 Sierra 1500\u003c\/li\u003e\n\u003cli\u003eHuge increase in brightness, with pure white and brilliant amber output\u003c\/li\u003e\n\u003cli\u003eMore uniform output, upgrade from segmented factory optics\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) application specific LED Halos\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails with T-taps\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not compatible with 2016-2018 GMC Sierra 2500 or 3500. Application: DRL Make: GMC Model: Sierra 1500 Years: 2016, 2017, 2018 Electrical Compatibility: No electrical issues (tested and confirmed)\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasured Lumens: 670 (Switchback Halo - Amber Turn Signal)\u003c\/li\u003e\n\u003cli\u003eColor Temp (CCT): 2000K, 6000K Power (watts): 11.65 (Switchback Halo - Amber Turn Signal)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 9-16V Current (amps at 13.2V): .910 (Switchback Halo - Amber Turn Signal)\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eLED Emitter: Custom-Manufactured Connector(s): JST Inline\u003c\/li\u003e\n\u003cli\u003eConnectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Features: External, Waterproof, Constant Current\u003c\/li\u003e\n\u003cli\u003eMaterials: FR4 PCB\u003c\/li\u003e\n\u003cli\u003eCooling: Passive, no heatsink Product Dimensions (in): 14.25x8.75x2.25\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127485706380,"sku":"DD2177","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2177-GBFG.jpg?v=1749011489"},{"product_id":"halo-lights-led-110mm-switchback-four-diode-dynamics","title":"Halo Lights LED 110mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127486623884,"sku":"DD2160","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2160-GBFG.jpg?v=1749011488"},{"product_id":"halo-lights-led-110mm-red-four-diode-dynamics","title":"Halo Lights LED 110mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127486656652,"sku":"DD2159","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2159-GBFG.jpg?v=1749011486"},{"product_id":"halo-lights-led-150mm-switchback-single-diode-dynamics","title":"Halo Lights LED 150mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511462028,"sku":"DD2068S","price":67.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2068S-GBFG.jpg?v=1749011467"},{"product_id":"halo-lights-led-150mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 150mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511691404,"sku":"DD2068","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2068-GBFG.jpg?v=1749011466"},{"product_id":"halo-lights-led-140mm-switchback-single-diode-dynamics","title":"Halo Lights LED 140mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511789708,"sku":"DD2067S","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2067S-GBFG.jpg?v=1749011465"},{"product_id":"halo-lights-led-140mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 140mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127511920780,"sku":"DD2067","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_9c390ef8-a432-4478-b2f3-7054dfec3c29.jpg?v=1749011464"},{"product_id":"halo-lights-led-130mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 130mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e130mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127512281228,"sku":"DD2066","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_369edcf6-2ba5-477c-9596-f696445b9b65.jpg?v=1749011461"},{"product_id":"halo-lights-led-120mm-switchback-single-diode-dynamics","title":"Halo Lights LED 120mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127514804364,"sku":"DD2065S","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2065S-GBFG.jpg?v=1749011460"},{"product_id":"halo-lights-led-120mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 120mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127515525260,"sku":"DD2065","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_6db73804-7a61-41c6-94c1-e82102801350.jpg?v=1749011459"},{"product_id":"halo-lights-led-110mm-switchback-single-diode-dynamics","title":"Halo Lights LED 110mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127515656332,"sku":"DD2064S","price":57.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2064S-GBFG.jpg?v=1749011458"},{"product_id":"halo-lights-led-110mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 110mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e110mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127515754636,"sku":"DD2064","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_1868601a-3690-4aa5-8588-d52f2225e189.jpg?v=1749011457"},{"product_id":"halo-lights-led-100mm-switchback-single-diode-dynamics","title":"Halo Lights LED 100mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516016780,"sku":"DD2063S","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2063S-GBFG.jpg?v=1749011456"},{"product_id":"halo-lights-led-100mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 100mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516246156,"sku":"DD2063","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_2020ab94-7a64-4702-9b4d-2fad75f2dee9.jpg?v=1749011454"},{"product_id":"halo-lights-led-90mm-switchback-single-diode-dynamics","title":"Halo Lights LED 90mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516442764,"sku":"DD2062S","price":52.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2062S-GBFG.jpg?v=1749011453"},{"product_id":"halo-lights-led-90mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 90mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e90mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127516704908,"sku":"DD2062","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_0218155c-f087-46c4-b8e2-b0262ab849d9.jpg?v=1749011452"},{"product_id":"halo-lights-led-80mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 80mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127517687948,"sku":"DD2061","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_9c615fb8-85d7-41a8-9d4f-2cb8e31cae7d.jpg?v=1749011451"},{"product_id":"halo-lights-led-70mm-switchback-single-diode-dynamics","title":"Halo Lights LED 70mm Switchback Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Switchback Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127518179468,"sku":"DD2060S","price":47.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2060S-GBFG.jpg?v=1749011450"},{"product_id":"halo-lights-led-70mm-switchback-four-diode-dynamics","title":"Halo Lights LED 70mm Switchback Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Switchback set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127518867596,"sku":"DD2060Q","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2060Q-GBFG.jpg?v=1749011449"},{"product_id":"halo-lights-led-70mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 70mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127520571532,"sku":"DD2060","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/hd_halo_switchback_collage_977ca354-6b1a-4750-a4f7-e49d4167db59.jpg?v=1749011447"},{"product_id":"halo-lights-led-50mm-switchback-pair-diode-dynamics","title":"Halo Lights LED 50mm Switchback Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50mm Switchback Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127524470924,"sku":"DD2058","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2058-GBFG.jpg?v=1749011443"},{"product_id":"halo-lights-led-160mm-red-single-diode-dynamics","title":"Halo Lights LED 160mm Red Single Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e160mm Red Single\u003c\/li\u003e\n\u003cli\u003eOne (1) LED halo rings\u003c\/li\u003e\n\u003cli\u003eOne (1) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eOne (1) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eFour (4) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: One (1)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127525093516,"sku":"DD2057S","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2057S-GBFG.jpg?v=1749011442"},{"product_id":"halo-lights-led-160mm-red-pair-diode-dynamics","title":"Halo Lights LED 160mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e160mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127526273164,"sku":"DD2057","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2057-GBFG.jpg?v=1749011441"},{"product_id":"halo-lights-led-150mm-red-pair-diode-dynamics","title":"Halo Lights LED 150mm Red Pair Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e150mm Red Pair\u003c\/li\u003e\n\u003cli\u003eTwo (2) LED halo rings\u003c\/li\u003e\n\u003cli\u003eTwo (2) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eTwo (2) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEight (8) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Two (2)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127526895756,"sku":"DD2056","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2056-GBFG.jpg?v=1749011439"},{"product_id":"halo-lights-led-140mm-red-four-diode-dynamics","title":"Halo Lights LED 140mm Red Four Diode Dynamics","description":"\u003cp\u003eHDHalo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003eSizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e\n\u003cp\u003eMounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.\u003c\/p\u003e\n\u003cp\u003eWiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e\n\u003cp\u003ePWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhite: White Low Power, 50 percent brightness\u003c\/li\u003e\n\u003cli\u003eRed: White High Power, 100 percent brightness\u003c\/li\u003e\n\u003cli\u003eYellow: Signal, double brightness, flashing (dims if powered more than two seconds)\u003c\/li\u003e\n\u003cli\u003eBlack: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).\u003c\/p\u003e\n\u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e\n\u003cp\u003eExperience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e\n\u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e\n\u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included In the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e140mm Red set of 4\u003c\/li\u003e\n\u003cli\u003eFour (4) LED halo rings\u003c\/li\u003e\n\u003cli\u003eFour (4) waterproof drivers\u003c\/li\u003e\n\u003cli\u003eFour (4) input wire pigtails\u003c\/li\u003e\n\u003cli\u003eEighteen (18) T-tap connectors\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003cli\u003eQuantity: Four (4)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 year warranty\u003c\/li\u003e\n\u003cli\u003e100 percent Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 9-16V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40C to 85C (-40F to 185F)\u003c\/li\u003e\n\u003cli\u003eConnector(s): JST\u003c\/li\u003e\n\u003cli\u003eInline Connectors, T-Tap Inputs\u003c\/li\u003e\n\u003cli\u003eDriver Dimensions: 2.5 x 1.38 x 0.88 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":32127527125132,"sku":"DD2055Q","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0298\/1088\/4748\/products\/DD2055Q-GBFG.jpg?v=1749011438"}],"url":"https:\/\/lightwerkz.net\/collections\/vehicle-specific\/shipvendor.oembed?page=4","provider":"Lightwerkz Global Inc","version":"1.0","type":"link"}